| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 894.1 | I think I will try this! | WOTVAX::HATTOS | I think, Therefore I'm paid less | Tue Apr 12 1994 12:19 | 12 |
| Jim,
Do you mean you want the HUBWATCH software loading to a network drive
and then to be able to connect to that drive and run HW?
If so, doesn't the installation give you the option of installing to a
drive which is already connected.
I haven't tried it myself but now you have raised the question I think
I will!
Stuart
|
| 894.2 | Exactly | GLDOA::JSCHMIDT | Wire's Wire; Unless it's a Network | Tue Apr 12 1994 20:53 | 8 |
| Stuart,
That is exactly what I would like to do.
Please let me know if it works.
Regards,
Jim
|
| 894.3 | This should work on V2.0 - I assume you meant V2 | NAC::FORREST | | Thu Apr 14 1994 21:49 | 8 |
|
I'm assuming that this works with V2.0 - I think Engineering has
verified this in a Pathworks environment. No guarantees on Novell
though.
Stuart, please let me know if it DOESN'T work.
jack
|
| 894.4 | Worked ok for me! | DELBOY::STUS::Stuart Hatto | ACB actually means A Cold Beer | Fri Apr 15 1994 10:36 | 8 |
| Hi,
I have checked and assuming that the PWV5.0 Network is already installed,
i.e. don't install the network option in Hubwatch... It works just fine!
Saved some space on my disk that has!
Stuart
|
| 894.5 | PW 5.0 Co-existance documented? | VMSNET::S_VORE | | Fri Jul 29 1994 15:01 | 12 |
| Hi. I'm with PATHWORKS support and just got a call from a customer
who's using both PATHWORKS and HubWatch, and was confused about
STARTNET.BAT vs. STRTNDIS.BAT; I looked at both and ended up having him
just let PATHWORKS load TCPIP, TN, and BAPI. He says this works &
recommended I suggest this be noted in HubWatch's documentation. To be
honest, before yesterday I hadn't even heard of HubWatch, so hopefully
this note is enough of a suggestion (if it isn't already in there & he
just missed it).
btw, does HubWatch need TN and BAPI loaded, or just TCPIP.EXE?
Steven
|
| 894.6 | will be documented in next version of book | TNPUBS::J_GOLDSTEIN | Run over on the Info Highway | Mon Aug 01 1994 19:40 | 14 |
| Here's how I understand things...
You need TN and BAPI if you plan to use TELNET (needed if managing brouters from
HUBwatch).
If you're running PATHWORKS V5.0 and you have a TCP/IP network running, then
install HUBwatch only and use the PATHWORKS network. If you install our TCP/IP
stack, you'll need to use STRTNDIS to start the network before starting
HUBwatch. In any case, you need some TCP/IP network running before you start
HUBwatch.
This will be documented in the next version of the install book
joan
|
| 894.7 | HUBwatch,Pathworks & WFW | KERNEL::BURNS | | Thu Oct 06 1994 10:14 | 8 |
|
Hello,
Has anyone run HUBwatch on pathworks 5.0a & windows for
workgroups.
Thanks in advance.
Margaret Burns.
|