[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

823.0. "T2.8 add module bug?" by WARNUT::BANKST (Network Mercenary) Tue Mar 15 1994 12:38

    Is there a bug int HUBwatch Windows T2.8 with the add module panel,
    that greys-out the APPLY and OK buttons?
    
    I can't seem to get to a stage with the add module where it allows me
    to hit these two buttons, and hence can't add a module.
    
    I need to add two brouter 90s to a hub, the bridge sees them both as
    type unkown, and I can't get them to appear in the HUB as brouters.
    
    I followed the procedure in the docs, to no avail.  I have them defined
    as agents and can manage them as standalone agents, but can't get them
    into a hub 90 display.  The agent is V1.1 and the bridge V3.0.
    
    How do you do this?!?!?
    
    	Thanks
    		Tim
T.RTitleUserPersonal
Name		DateLines
823.1Add screen needs more infoROGER::GAUDETBecause the Earth is 2/3 waterTue Mar 15 1994 15:136
Someone more knowledgeable than I should probably jump in here, but I believe
that when adding a brouter you have to provide the following (at minimum): MAC
address, IP address and community string.  The OK/APPLY buttons will not become
active until at least these things are specified.

...Roger...
823.2try againWARNUT::BANKSTNetwork MercenaryWed Mar 16 1994 06:337
    Hi Roger
    
    I will try this today again, but I believe I did all those things -
    we'll see....
    
    Thanks
    		Tim