[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

813.0. "HUBwatch under Windows NT (Intel)?" by HGRNCC::FARADAYCHONG (Faraday Chong@hgo 852-8053590) Thu Mar 10 1994 12:58

    This is a question on feasibility of running HUBwatch for Windows on
    Windows NT (Intel). This one has no relation to #594.
    
    This is a request from a customer who wanted to use one desktop to
    manage Windows NT PCs and Hub. They are currently planning to use
    Hermes which runs on Windows NT, and the customer prefer to run
    HUBwatch on the same PC.
    
    Any reasons this would not work?
    
    Ideally, there is a native Windows NT version of HUBwatch, we know it
    will take awhile. So we are think of running HUBwatch under Windows NT
    (Intel) as interim.
    
    Please advise.
    
    Faraday
T.RTitleUserPersonal
Name		DateLines
813.1Who else sees HUBwatch on Windows NT as critical today?NAC::FORRESTMon Mar 14 1994 20:3311
	Faraday, we are not hearing many requests yet for the Windows NT 
	version of HUBwatch. I suspect as time goes on, we will hear it 
	more and more.

	I have no reason to believe that running HUBwatch under the 
	Windows NT emulator will work, since we have not tried it. Perhaps 
	we will find some time before V3.0 to take a look - not a committment 
	though.

	jack