Conference netcad::hub_mgnt

788.0. "Management Bus slot sensitive?" by WOTVAX::HATTOS (I think, Therefore I'm paid less) Thu Mar 03 1994 13:45

    I have been configuring a DH900MS with 2 DR900TM and 2 DR90C and 1
    DS900TM. I have discovered a peculiar problem which has me baffled so
    thought I would voice it here.
    
    I originally set up the Hub Manager with an IP address and selected one
    of the DR900TM's in Slot 4 to provide IP services. I also set up that
    repeater with its own IP address and community etc...
    
    I fire up Hubwatch and the Hub appears, however when I double click on
    the repeater providing services, I get an 'Agent did not respond'
    message.
    
    I configured the other repeater the same way and stuck it in slot 1,
    same problem. I then decide to put the repeater in slot 8. Hey presto I
    can manage it fine, I moved the other repeater into slot 8 and I can
    manage that too.
    
    Do I have two faulty slots? Or is there something else wrong?
    
    Stuart

    Which HUBwatch are you using?

And what version of MAM code are you using?

    Sorry, I usually do this... I forgot!
    
    HW for Windows T2.8
    MAM V2.2.1
    
    Regards

    Double check in the DH900MS which slot it is getting it's IP services
    from.
    
    Dave

    Hi Dave,
    
    It was definitely set for slot 4. When I moved the repeater I changed
    it to slot 8 and it sprang into life.
    
    Stuart