| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
I've installed T2.8 and I'm having problems displaying DECbridge 90's.
I've got one in a DEChub 900 and it says "No agent specified for
slot MAC address". I have tried the "Configuation Menu" add module, and
it only had DECservers in it.
The other DECbridge 90 is in a DEChub90 and when I click on it, nothing
happens.
What gives?
Dave
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 765.1 | LEVERS::SWEET | Thu Feb 24 1994 20:10 | 7 | ||
First you need a DECagent 90 on the network to manage a DECbridge 90
even in a 900. You must add this agent to the agents table (Manage
Table pull down) in HUBwatch and add a community with the
MAC address of the bridge and IP address of the DECagent. This
is explained in detail in the install and config manual.
Bruce
| |||||
| 765.2 | ALBANY::BARTLEY | Fri Feb 25 1994 19:20 | 4 | ||
Thanks, I've been copying the field test verisons over the network to
try out and have been trying to fly without them.
Dave
| |||||