[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

742.0. "DEPCA.DOS from HUBWatch warm restart problem" by HLFS00::FOLKER_P (Magis Futundum Est) Fri Feb 18 1994 13:29

    After installing HUBWatch and using the NDIS driver (because i have to
    use IP and DECNET) I had the following problem after a warm reboot of 
    my PC.
          LOADING DEPCA.DOS gives me a wrong IRQ (1F) and a wrong memory
          adres.
    	  Of course NETBIND failed with an error 33, unable to bind.
    
    A cold start did not have this problem.
    
    The Pathworks Support Group in utrecht give me the sollution, use the 
    DEPCA.DOS or the MACDEPCA.DOS from the floppy that came with the
    ethernet controller.
    
    Perhaps this can be included in the release notes of HUBwatch.
    
    
    Regards Peter Folker
    MCS Eindhoven
    The Netherlands
T.RTitleUserPersonal
Name		DateLines