| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Are there part numbers available for patching equipment (Cables,
panels) for the new DECrepeater 900GM?
Thanks
Jim
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 720.1 | see also 691.1 | DELNI::GIUNTA | Sat Feb 12 1994 00:32 | 8 | |
The BN26U-03 is a 50-pin Telco to 12 RJ's cable that can be used with
the 900GM. And there are industry-standard 50-pin to 50-pin cables
which are readily available, but I'm not sure if they are offered
through DECconnect or not, and I don't have my catalog here with me.
What exactly are you looking for?
Cathy
| |||||
| 720.2 | Thanks | GLDOA::JSCHMIDT | Wire's Wire; Unless it's a Network | Mon Feb 14 1994 13:43 | 16 |
Thanks Cathy.
The BN26U-03 will work for my solution.
I have several customers who want to use RJ45 patching in the Wiring
closets. They do not want to do the patching directly into the DEChub.
The 50 Pin telco is a clean way of connecting the Patch Panel to the
DEChub 900 Repeater. The problem I was trying to solve was connecting
three 8 port patch blocks to two 50 pin telco connectors.
The BN26U-03 along with the H3117-NA/NB or the H3107-N will solve this
problem.
Thanks again,
Jim
| |||||