| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Hi, folks.
I'm not used to DECagent 90, but I have to help a field engeneer to
upgrade from 1.0 to 1.1.
He phoned me and said that he had already loaded the new software,
but he wasn't able to get the menu screen in it's console terminal.
He told that not even the pound sign appears, and there is a led
flashing to indicate that a new IP address is needed, but he doesn't
know how to do this without the menu screen.
Please, I would like to check the steps to do such upgrade to see
if he has done it in the right way.
Thanks a lot for any help.
Regards.
Manoel F. Abreu Neto
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 622.1 | I think the upgrade failed | QUIVER::GAUDET | Fri Jan 14 1994 19:21 | 17 | |
The upgrade from V1.0 to V1.1 of the DECagent firmware is a two-step
process. See the file:
QUIVER::PROJ$722:[ONEHUB.RELEASE.DENMA.V1_1]DENMA_LOAD_PROCEDURE.TXT
This should tell you everything you need to know.
>> He told that not even the pound sign appears, and there is a led
>> flashing to indicate that a new IP address is needed, but he doesn't
>> know how to do this without the menu screen.
It sounds like the image didn't load properly. If it's the 2nd LED
that's flashing, the load failed. When there is no IP address, the 3rd
and 4th LEDs will alternately flash at one-second intervals.
Roger Gaudet
DECagent 90 development
| |||||
| 622.2 | Thanks | VAXRIO::MANOEL | Manoel Abreu from MCS - Brazil(Rio)- | Mon Jan 17 1994 16:57 | 10 |
Re 01
I've got the explanation file, thanks a lot for your help
Cheers
MFAN
| |||||