Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
Moderator: | NETCAD::COLELLA DT |
Created: | Wed Nov 13 1991 |
Last Modified: | Fri Jun 06 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 4455 |
Total number of notes: | 16761 |
The following are the error codes which are displayed on the DEChub 900 Management agents LCD during selftest. Test ID Description 0101 CPU Test 0102 Diagnostic Code (EPROM) CRC Test 0103 M68332 Internal Memory Test 0104 Memory Data Bus Test 0105 Memory Address Bus Test 0106 Protected Memory Test 0107 Refresh Timer Test 0108 Main Firmware (FLASH) CRC Test 0201 Non-Volatile Memory (EEPROM) Test (MFG only) 0202 Main Memory Quick Verify Test 0203 Main Memory Extended Test (MFG only) 0301 Bus Error timer 0302 Stuck Interrupt 0303 RTOS Event Interrupt 0304 RTOS General Timer Interrupt 0305 2681A DUART Interrupt 0306 Software Watchdog Timer Interrupt 0307 Interrupt Priority 0401 M68332 Chip Select Mapping 0402 PMCA Test 0403 2681A DUART Test 0404 2681A External Loopback Test (MFG only) 0405 Console Port Test 0406 Token Ring Relay selftest (MFG only) 0407 Secretariat Backplane Test (MFG only) 0408 Matrix Backplane Test (MFG only) 0409 Power supply bus Test (MFG only) 040A Temperature Monitor Test Any that fail in the field would be cause for swapping the MAM, I think.
T.R | Title | User | Personal Name | Date | Lines |
---|