[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

558.0. "AUI & 90's serie" by PRSSUD::CARRAYROU () Fri Dec 10 1993 17:13

    
    
    
    In the draft documentation of DR90TS  I saw 2 connectors on the back 
    pannel  (a 48-pin connector and a 160-pin connector ) . 
    
    I don't see the AUI  port on the front bezel , so I suppose that AUI port 
    come with the docking station.
    
    Does the docking station use this 160-pin connector to offer the AUI
    port . 
    
    In this case all the old 90's modules cannot use this AUI port.
    
    thanks

T.R	Title	User	Personal Name	Date	Lines
558.1	only the TMI will have the AUI out the back	DELNI::GIUNTA		`Fri Dec 10 1993 18:03`	8
	You are correct that the back panel (I'd prefer not to call it a docking station) on the DETMI will provide the AUI connection, and that this back cover will not be able to be used on older 90 modules to provide an AUI. Only the DETMI will have the AUI out the back at this point, and there are no plans to make any changes to add the AUI to the existing modules. Cathy
558.2		NACAD::HERTZBERG	History: Love it or Leave it!	`Fri Dec 10 1993 20:04`	3
	... and if there is documentation which shows a 160-pin connector on the DETMI, it is incorrect. Only the 48-pin connector is present, as this is a 90-size module.
558.3		PRSSUD::CARRAYROU		`Mon Dec 13 1993 11:25`	6
	Thanks for your answers The figure of back pannel seems wrong