| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
I have questions about DECbridge900MX.
(Q.1)
I know that DECbridge900MX has two FDDI ports (A,B) on a front panel.
Can I use the FDDI ports of DECbridge900MX installed in a DEChub900 ?
If I can, is the following configuration right?
**************
* FDDI Ring *
****** ******
* * DEChub900MS
* * |~~~~~~~~~~~~~~~~~~~~~~~|
* * | |~~~|DB900MX |
* * | | | |
* *******A | |
* | | | |
**********B |-----------------| Channel (Ethernet)
| | |-----------------| Channel (Ethernet)
| | |-----------------| Channel (Ethernet)
---------- |-----------------| Channel (Ethernet)
| | |AUI|-----------------| Channel (Ethernet)
| | |___| |
| |_______________________|
~~~~~~~~
Ethernet
DB900MX is connected to FDDI Ring by Physical FDDI ports on a front
panel, and connected to one external Ethernet. And five Ethernet
ports of it were assigned to five Ethernet backplane channels on a
DEChub900. Is it correct?
(Q.2)
Can I assign one FDDI port and six Ethernet ports to DEChub900
backplane channels?
Thanks and Regards,
Kouhei
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 535.1 | QUIVER::SLAWRENCE | Fri Dec 03 1993 15:09 | 7 | ||
Q.1) Yes, you can use the FDDI DAS connection in a DEChub 900 and the
configuration you show is exactly the sort of thing it is built to do.
Q.2) You can assign all 6 Ethernets to the backplane (note that each
Ethernet can be _either_ front or back, but not both); whether or not
you will be able to connect just one FDDI to the back is still TBD; as
it stands _now_, you must have either both FDDI front or both back.
| |||||
| 535.2 | Thanks | TKOV51::HAYAKAWA | Kohei Hayakawa,DS/EIC/NIS/NT/SE, HUB5F | Mon Dec 06 1993 23:12 | 4 |
Thank you for your reply. Kohei | |||||
| 535.3 | TKOV51::HAYAKAWA | Kohei Hayakawa,DS/EIC/NIS/NT/SE, HUB5F | Wed Dec 15 1993 07:52 | 10 | |
> Ethernet can be _either_ front or back, but not both); whether or not > you will be able to connect just one FDDI to the back is still TBD; as > it stands _now_, you must have either both FDDI front or both back. Can DECbridge900MX shipped in Jan '94 assign one FDDI to the back? Regards, Kohei | |||||
| 535.4 | IS Dual-Homing Supported at FCS? | HGRNCC::FARADAYCHONG | Faraday Chong@hgo 852-8053590 | Thu Dec 16 1993 05:04 | 8 |
Another config question on DB900MX.
At FCS, can it dual-homed to say DECconcentrator 500?
If this capability is not planned at FCS, when would it be? We need
this to help customer planning their network.
Faraday
| |||||
| 535.5 | QUIVER::SLAWRENCE | Thu Dec 16 1993 16:41 | 3 | ||
Dual homeing will be supported via the front bezel cabling, but not on
the backplane; so yes - to the DECconcentrator 500 would be ok.
| |||||