[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

461.0. "HubWatch for Windows V1.0 hang in POLLDLL" by GIDDAY::WAN (Denny Wan, Sydney CSC) Mon Nov 01 1993 01:55

    A customer has reported a hang problem with HubWatch V1.0 runing under
    Windows V3.1 and DOS V4.1.
    
    HubWatch has been running for a couple of days and then it displayed
    the following error message :
    
    core protection : error in module POLLDLL 0001:28Ca
    
    Has anyone experienced this problem? Any idea what the problem might
    be? This is a new istallation. I have told him to upgrade to V1.1.
    
    Regards,
    
    
    Denny.
T.RTitleUserPersonal
Name		DateLines
461.1This may be more widespread than we thoughtNAC::FORRESTThu Dec 23 1993 20:0411
	We didn't hear about this problem until we were ready to release 
	V1.1, then we thought it was just a V1.1 problem, not a V1.0 
	problem. 

	Anyway, after many attempts to fix this bug (we have to wait at 
	least 12 hours to see if it's going to fail), we may finally have 
	a fix.

	The current beta of V1.1 that may fix this problem can be copied 
	over the net. See NAC::MANAGEMENT:WINDOWS_SETUP.TXT for instructions.