[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

283.0. "HubWatch V1.1, 4 MEG 90tls, MNENG2.SYS, Can't do sets" by ANGLIN::ORTHOBER () Wed Jun 23 1993 15:41

	Hi All:

	I am having a problem with 90tls and Hubwatch doing sets.

	Hubwatch V1.1 on Ultrix

	4 Meg 90tls Loading:

	MNENG2.SYS;1           2038   3-MAR-1993 09:00:26.26

	The sets timeout.  Is there any wierdo setting on the 90tls
	that I have to do.  The 90tls display fine in the hub and
	as a stand alone agent but no can do sets.

	thanks for the help
ort1
T.RTitleUserPersonal
Name		DateLines
283.1Enable SETs for your TL community.SLINK::HOODI'd rather be surfingWed Jun 23 1993 16:5423
At the terminal server, do the following:

> SHOW SNMP

| SNMP State:                ENABLED      Authentication Failure:    ENABLED
|
|Community Name                    Address          GET GETNEXT SET TRAP
|
|WRITEME                           ANY              ENA  ENA    ENA  DIS
|READIT                            ANY              ENA  ENA    DIS  DIS

The community you're using must have SET enabled.  In the above example, 
WRITEME has SET enabled, and READIT does not.

By default, communities in the 90TL are not SET enabled.  Use the command:

> CHANGE SNMP COMMUNITY comm_name SET ENABLE

to enable sets for a particular community.


- Tom Hood
  HUBwatch Lifestyle Specialist