[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

236.0. "Hubwatch VMS - Hardware Requirements" by VAXRIO::CARIJO (Fernando Carijo' - SME, Rio) Wed May 12 1993 14:47

    I would like to know if it is possible to use Hubwatch for VMS using a
    X-window terminal and a VMS server instead of using a VAXstation.
    (What I really want is to use a PC with Pathworks with its  X-window
     capability).
    
    Also, I would like to know if Hubwatch for Windows is available,
    because it is offered in the DECdirect, but I was told it would
    be available in July/October.
    
    	Thanks,
    		Carijo'

T.R	Title	User	Personal Name	Date	Lines
236.1	It should work just fine.	SLINK::HOOD	I'd rather be surfing	`Wed May 12 1993 15:49`	6
	We've never used an X-windows terminal, but we have used the x-server to run it from one system to another's display and that works fine. The x terminal should work ok, too. Tom Hood HUBwatch development
236.2	Yes	LEVERS::SWEET		`Wed May 12 1993 19:09`	4
	We did in fact test with X-terminals (VXT) and also with eXcursion running on a PC and it works. Bruce
236.3	Thanks	VAXRIO::CARIJO	Fernando Carijo' - SME, Rio	`Thu May 13 1993 16:57`	3
	Thank you very much. I'll try it (and sell it...) Carijo'
236.4	Windows should ship 1 July 1993	EMDS::SEAVER	Bill Seaver, HUBwatch Mktg	`Thu Jun 03 1993 02:19`	1
	HUBwatch for Windows should be out the beginningof JULY 1993