[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

224.0. "Need HUBWATCH PAK as expired/protected..." by CGOS01::DMARLOWE (dsk dsk dsk (tsk tsk tsk)) Mon May 03 1993 18:13

    The PAK I pulled from SLINK::DKB0:[HUBWATCH_T11J]HUBWATCH.PAK expired
    May 1.  I went to pull another copy from SLINK::DKB0:[HUBWATCH_T11J],
    hoping a newer one was there and I get:
    	HUBWATCH.PAK;*     no privilege for attempted operation
    
    Is there a newer PAK that I can pull?  I've been demoing HUBWATCH
    for VMS quite a bit lately so it would be nice not to be down too
    long.  Also please confirm      Termination Date: 1-MAY-1993   
    is something much farther in the future.
    
    Thanks,
    dave
T.RTitleUserPersonal
Name		DateLines
224.1VTX no good for non-USCGOS01::DMARLOWEdsk dsk dsk (tsk tsk tsk)Mon May 03 1993 19:053
    I cannot get PAKs thru VTX.  Is it possible to get one off SLINK?
    
    dave
224.2CSC32::B_GOODWINWed May 19 1993 20:256
I too have an expired license. Is there a pointer to a new license somewhere. 
I'm preparing a seminar for people here at the CSC and need to get my HUBwatch
working again.

Brad Goodwin
CSC/CS Network Support
224.3License available through vtx pakQUIVER::WILSONWed May 19 1993 20:5013
The license is available through VTX PAK.  If you need the VMS license
the name is HUBWATCH.  If you need the ULTRIX license the name is
HUBWATCH-FOR-MSU.

If you are in the U.S. please get the license from VTX PAK.  

But if you don't have access to vtx we have placed paks with the kits 
for V1.1.  Please see note 178.8 for information on where everything 
is located.

Karen Wilson
HUBwatch Development
224.4CSC32::B_GOODWINThu May 20 1993 16:434
Hum, I tried VTX PAK yesterday and it didn't find a HUBWATCH pak. I'll try again
today.

Brad
224.5INVALID LMF PRODUCT NAMECSC32::B_GOODWINThu May 20 1993 19:5727
I get  INVALID LMF PRODUCT NAME - PLEASE REKEY when entering HUBWATCH in VTX PAK

Brad

                       *** One PAK By Product Name ***

   To obtain the layered product PAK you need, enter the LMF name at the  LMF
   PRODUCT NAME prompt and type  FORM ENTER  to process. If you do  not  know
   the LMF name of the layered product, you may want to select number 5 or  6
   on the previous menu to obtain what is needed.






   LMF PRODUCT NAME: HUBWATCH                          FORM ENTER  to process
                    INVALID LMF PRODUCT NAME - PLEASE REKEY
   LMF PRODUCT NAME:                                   FORM ENTER  to process





 
  EXIT  to Exit         HELP  for Help          BACKUP  Return to Previous Menu
224.6VTX is busted.SLINK::HOODI'd rather be surfingThu May 20 1993 20:134
VTX PAK is hosed.  Until it's back on-line, get yer paks from the kit
areas on SLINK (OpenVMS) and BHUB (ULTRIX).

Tom Hood