[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

193.0. "Pointer needed to DECbridge 90 EPROM update" by BOSNET::COLUMBUS () Wed Mar 24 1993 17:00

Maybe I missed it in this conference, but can someone point me to the 
location of the latest DECbridge 90 firmware? Is there a VAX load procedure?


Thanks,
John Columbus
T.RTitleUserPersonal
Name		DateLines
193.1PointerLEMAN::BRUNNERThu Mar 25 1993 10:185
    The latest firmware is at
    KALI::sys$public:[wgb.firmware.final]flash.exe
    For a VMS load look at 51.2 pointer.
    Hope it helps
    Walter
193.2It worked... a few changesBOSNET::COLUMBUSThu Mar 25 1993 19:3117
Thanks for the info...I ended up doing the following

1.
$ copy KALI::sys$public:[wgb.firmware.v3]flash.exe
_To: flash_v3.exe

2. 
NCP>set node 63.501 name db90 hard addr 08-00-2b-25-d4-33 serv circ sva-0 -
_ load file flash_v3.exe

NCP>load node db90


The hub loaded and ran hubwatch fine..


John
193.3DB90 v3.1 is protectedHOO78C::TURHANTue Apr 13 1993 12:5121
    
    Hi,
    
    The 3.1 kit at KALI is protected. Could you please help to copy it ?
    
    Thanks,
    
    Tankut
    
    
    Directory KALI::SYS$PUBLIC:[WGB.FIRMWARE.V31]
    
    CRC_TAB.H;3        no privilege for attempted operation
    FLASH.EXE;276      no privilege for attempted operation
    FLASH.INT;18       no privilege for attempted operation
    FLASH.TSK;11       no privilege for attempted operation
    FLASHTASK.BLD;1    no privilege for attempted operation
    FLASH_ROM.DIR;1           3
    IMAGE_BLDR.EXE;1   no privilege for attempted operation
    
    Total of 7 files, 6 blocks.
193.4protection problem should be fixedEMDS::SEAVERBill Seaver, HUBwatch MktgFri Apr 16 1993 03:022
    Protection problem should be fixed.
193.5V3.1 HUBwatch is not workingHOO78C::STEEGThu Apr 29 1993 12:5613
    Hi,
    
    I loaded the bridge with V3.1 firmware.
    This is fine, with NCP I can reach the bridge90 and see it is running
    with firmware V3.1.
    
    BUT I can't reach the bridge (and the repeaters) with HUBwatch.
    
    What can be the problem?
    
    
    /-/		Henk.
193.6please check the DENMA consoleSLINK::HOODJust add waterThu Apr 29 1993 14:318
Do the bridge and repeaters show up in the DECagent's "Show Community"
   console display?

If so, then HUBwatch *should* see them.

If not, make sure you've added the bridge (either thru the agent's console
   or thru HUBwatch) correctly, and have hub management enabled on the bridge.
   That should fix the problem.