[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

182.0. "Suggestions" by CSC32::R_ROMMES () Thu Mar 11 1993 21:50


	After just installing HUBWATCH for MSU (MMAHWMSU11D) I would like to 
suggest that you allow hubatch some minimal connectivity to snmp agents in the 
hub prior to having that agent configured.
	For example...

		I have a hub with a db90, agent, some 90l+'s and some 90tl's. 
When I add a module for the 90tl, I can not even update the screen to allow the
hub to see it unless I give it an IP address. It would be nice to be able to 
add the module, then use hubwatch to allow me to connect to it and configure
the ip address and internet specifics. Instead, I must configure each 90tl
manually prior to  adding them to the hub.... This allows a user to use the 
windows interface as much as possible, I assume that that is the goal here...




						Thanks, Rich.
T.RTitleUserPersonal
Name		DateLines