[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

155.0. "Please see Bruce Sweet for engineering support ..." by NOHOST::LEVIN (Bryan, LENaC Engineering, MLO3-3/U39) Fri Feb 12 1993 13:41

    				Please Note:
    
    For all HUB management-related inquiries (that require an engineering
    response), specifically regarding the DENMA (DECagent 90), or HUBwatch
    (vms, ultrix, or dos), please see Bruce Sweet, the current engineering
    manager for this line of products.  I am no longer associated with this
    product or project.  I will only answer questions regarding HUBwatch
    V1.0 for Ultrix, but since V1.1 is well on it's way to release, _that_
    should be the version that is tested, sold, etc.
    
    FYI,
    
    .bl
T.RTitleUserPersonal
Name
DateLines
155.1Use this conference not direct mailLEVERS::SWEETMon Feb 15 1993 17:3810
    Thankyou for the introduction.....Please continue to use this
    notes conference as the forum to get your network management for
    the DEChub products questions answered. There is a team of
    folks working on these products who monitor this conference including
    engineering, marketting and product management.
    
    Please do not send direct mail unless it is an emergency (ie. immediate
    revenue impact!).
                                       
    Bruce