Conference netcad::hub_mgnt

138.0. "ivp fail for hubwatch for vms" by MEOC02::FINCH () Fri Jan 29 1993 02:30

We have just installed hubwatch on a VMS system 5.5-1 with Bookreader X4.0-5
and unfortunately it is not working.

We have an image mismatch problem (see log of IVP enclosed) yet we do not 
understand why as the release notes specify that v4.0 of bookreader is 
supported.

Any help appreciated

Cheers,
Jill Finch

IVP with error follows.....
______________________________________________________________________________


$ @sys$test:hubwatch$ivp

HUBwatch for OpenVMS for VMS, version V1.1
Installation verification procedure.

*  What is the IP address of the DECagent?  16.153.224.139
*  What is the r/w Community String for the hub?  public
*  What is the name of the DECagent for the hub?  gnotuk

    Device:    WSA1:  [exec]
    Node:      0
    Transport: LOCAL
    Server:    0
    Screen:    0

   HUBwatch will now be run on the above display.
   When the front-panel view for your hub comes up, move the
      pointer to the `File` menu, and press and hold mouse
      button 1.  Slide the pointer down to `Exit` in the menu
      which will appear below File, and release mouse button 1.

   If HUBwatch fails to come up, check that the display information
      shown above is correct.
*  Hit the <Return> key to start HUBwatch or <ctrl/z> to abort:
%DCL-W-ACTIMAGE, error activating image DECW$XLIBSHR
-CLI-E-IMGNAME, image file CMGOP1$DKB0:[SYS0.SYSCOMMON.][SYSLIB]DECW$XLIBSHR.EXE
-SYSTEM-F-SHRIDMISMAT, ident mismatch with shareable image