| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 51.1 | | PRNSYS::LOMICKAJ | Jeffrey A. Lomicka | Wed Jul 29 1992 15:52 | 2 |
| This means that your flash ROM is empty. NDU should have loaded it for
you. I don't know why it didn't.
|
| 51.2 | bridge does not support ndu | EMDS::SEAVER | LENAC Net Mgnt Mktg 223-4573 | Wed Jul 29 1992 20:33 | 4 |
| It is my understanding that the currrent version of the bridge does not
support NDU. If you want instructions to upgrade your bridge code,
copy EMDS::MANAGEMENT:BRIDGE_LOAD.TXT. Note the current bridge code
level is higher than 2.5.
|
| 51.3 | Still having Problems | JOCKEY::GAMET | | Thu Jul 30 1992 14:26 | 3 |
| I have looked at the LOAD_bridge.txt and I dont have the commands load
and addaddress on my ultrix w/s 4.2a .can you tell me what product I
have to load ? Tim..
|
| 51.4 | VMS NCP load node works | ZPOVC::RAMARAJ | | Fri Jul 31 1992 03:28 | 23 |
| <<< EMDS::$1$DUA10:[NOTES$LIBRARY]HUB_MGNT.NOTE;1 >>>
-< Hub Management Conference >-
================================================================================
Note 52.0 VMS NCP load node works No replies
ZPOVC::RAMARAJ 17 lines 30-JUL-1992 23:27
--------------------------------------------------------------------------------
I have upgraded abt 5 DECbridge 90s using the faithfull VMS
NCP load node <nodename>
put the bridge firmware in MOM$Load and the load file in
NCP for the bridge as <name of firmware filename>
Ex.
ncp set node 13.1 db90 hard add 08-00-2b-xx-xx-xx service circ sva-0 -
load file = wgb_rbms_v25.exe
make sure your circ is service enabled and load node db90.
If you have a VMS system around, this is easier.
Raj
Singapore
|
| 51.5 | Time outs with NCP on busy network | JOCKEY::GAMET | | Tue Aug 04 1992 10:46 | 5 |
| I have upgreded the bridge usingvms ncp ok now but i had to take the
bridge card out of the hub and put it in a privet thin wire connected
directly to my workstation to load it sussesfully outher wise the ncp
load command wouled time out . Also the load took about 1 minit .
Regards Tim ..
|