[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference 7.286::atarist

Title:	Atari ST, TT, & Falcon
Notice:	Please read note 1.0 and its replies before posting!
Moderator:	FUNYET::ANDERSON

Created:	Mon Apr 04 1988
Last Modified:	Tue May 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	1433
Total number of notes:	10312

677.0. "Double trouble" by CSC32::COMULADA () Tue Nov 21 1989 16:42

    Does anyone out there know how to get "Word Writer" to stop from double
    spacing when printing a file. There is a pull down select for double
    spacing but I did not select it. Cannot find info in the DOC that
    references the double space print. I also set the printer for "CR" only
    but it made no difference.
    
    Thanks,

T.R	Title	User	Personal Name	Date	Lines
677.1	Check the Printer.CFG file	NETMAN::HOLZWASSER		`Tue Nov 21 1989 19:54`	11
	Have you checked to make sure that you have selected the proper Printer.CFG file? Also, have you double checked the printer's switch settings? (I'm assuming this is the first time that you've used the printer and are finding problems.) If you've done all this and there are still problems, suggest you drop back and use a dumb printer interface for transmitting pure ascii text and simple printer commands. This step may require some editing of another printer's .CFG file to get it to be as simple as possible. Then when you're done editing, select it as your Printer.CFG file and run the test again. Hope that helps.
677.2		PRNSYS::LOMICKAJ	Jeffrey A. Lomicka	`Wed Nov 22 1989 00:09`	4
	I assume that the double space item does NOT have a check mark next to it? That's how you tell if it's selected. Try turning the page numbers on - does it print one page across two pages, or does it print pages numbered in the right place with double spaced text?
677.3	what you see is NOTwhat you get	WFOV12::LAFLEUR		`Wed Nov 22 1989 12:20`	13
	When you set up your page layout make sure that the number of spaces that you leave for your left hand margin AND the total number of spaces between your tabs don't exceed 80 (I assume you are using 80 character mode). If the total is greater than 80 the program will wrap the extra spaces onto the next line. Because you can't see them you think they aren't there, the computer on the other hand sees them quite well and acts accordingly, giving you a blank line between printed lines. Check it out by switching to a larger number of characters per line (96) without adjusting anything. If everything now prints without spaces between lines you've found your problem. Bill
677.4	Double lines	CSC32::COMULADA		`Wed Nov 22 1989 15:40`	3
	Thanks forall the info, I will check things out this week-end and let you all know how it turns out..the page layout may be the problem in note .3..thanks again...