| Ok, here goes
Champ 25 SE Specifications:
Part Number 21-6600
Dimensions :
Height 17-1/2
Width 21-7/8
Depth 11"
Weight 42lbs
Power Output 25 Watts R.M.S.
Imput Impedance Input 1 -- 850 kohms
Input 2 -- 66 kohms
Effects Loop Preamp Output impedance -- 1 kohm
Power Amp Input impedance -- 100 kohm
Power Amp sensitivity -- 500 mV for clipping
Line Output -2 dBV into 600 ohms or greater
Power Requirement 120 VAC 60 Hz, 1 amp max, 100 Watts max.
Fuse Type 1 amp 125 volt minimum, SLO-BLO
Speaker Fender Special Design 12" 8 Ohm (p/n 025923)
Sound Classic to Thrash (...and all points in between)
The Fender Champ 25 se is a combo of classic old tube amp distortion
sounds and Fenders time test signature clean sounds packaged together
in a unique "hybrid" combo bringing together the best of tube and solid
state technology.
The Champ 25se normal channel features the standard compliment of
Colume, Treble, Mid, and Bass controls with the addition of a mid
shift button for that ultra clean sound. The drive channel features
Gain, Volume, and seperate EQ consisting of Contour, Treble, and Bass
The Master Loudness control has a dual function, it is the master
volume for both channels, and it is a loudness control in the classic
sense, when the Loudness is turned down, the lows and highs remain
enhanced.
The Champ has a detachable foot switch for selecting drive and reverb.
and an effects loop, and a headphone jack.
Last but not least the Champ has a 25 Watt tube amp, two 6l6gc's and
one 7025/12ax7a
Regards,
Pat
|
| Pat,
25 watts into a 12" speaker, eh? What is the speaker (watts) rating?
Does it 'breakup' nicely?
Also, how does the reverb sound? Does it compare favorably to
other (e.g., Twin) Fender reverb units?
Thanks,
-pat
|