[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference napalm::guitar

Title:GUITARnotes - Where Every Note has Emotion
Notice:Discussion of the finer stringed instruments
Moderator:KDX200::COOPER
Created:Thu Aug 14 1986
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:3280
Total number of notes:61432

1262.0. "Need help in adjusting bass strings." by NACAD::R_PEPE () Tue Apr 18 1989 17:01

    I'm posing this question because up 'til now, I've never attempted
    to make any adjustments to my bass guitar.  So, I don't know what
    kind of trouble I may get myself into.  What I'd like to do is 
    try to get my strings in closer to the finger board.  I have an
    S.D. Curlee bass which has independent adjustment screws for each
    string.  These are located down below the bridge.
    
    If I touch these set screws, is it going to grossly affect the 
    sound volume because of changing the string's distance to the 
    pickups?  
    
    Better yet, what's the proper way to do this adjustment?  OR -
    should I just get it done by a "pro"?
    
    -Ralph-
T.RTitleUserPersonal
Name
DateLines
1262.1Just do it.ELESYS::JASNIEWSKIWe're part of the fire that is burning!Tue Apr 18 1989 17:117
    
    	Sure! Go ahead and lower 'em. Just *compensate* for the distance
    to pole piece change by lowering your pickups too. Make the strings
    too low, and they'll be buzzing against the frets. Adjust 'em low
    enough for your liking, but not so low that they buzz.
    
    	Joe Jas
1262.2check for neck bow tooRICKS::CALCAGNITue Apr 18 1989 17:2616
    Of course, your strings may be high due to excess bow in the neck,
    in which case you won't be able to drop the strings low enough without
    getting buzz on the higher frets.  To check for neck bow, fret the
    E string at the first fret and at the fret where the neck joins the body
    simultaneously, and check that there isn't too much clearance between
    the string and any interveneing frets.
    
    How much is too much?  My advice, get it done once by a pro and
    remember how it was set up.
    
    There are some other notes in this conference that might help re
    setup, but I can't recall where they are.

    Good luck
    
    /rick
1262.3wow I liked the S.D.'s!!!HAMER::KRONThu Apr 27 1989 16:317
    Hi, these guys seem to have it all covered,I just wanted to ask
    about your bass.I used to have one myself but sold it in a weak
    moment(stupidity comes a calling!)which model do you have?(p/u config.,
    and how do you like it?)
    talk @ you soon,
    Bill
    
1262.4Those "E-string" Blues.FSTVAX::GALLOGlory DaysWed May 31 1989 13:5017
    
    
    	I have a question surrounding this. I adjusted the action on
    my bass last night to something I'm happy with. I noticed two things,
    after I did it. First, after I noticed that the E is quite loose
    compared to the other strings. Note that I did *not* adjust the
    E at all. This causes a loss of definition in the E string. The
    E also seems hard to tune correctly, due to the lack of tension
    on it. I also noticed a slight change in the intonation of the
    bass. It seems to be in, but "slightly?" off.
    
    Any Ideas.
    
    Tom
    
    BTW- This is a new PV Fury Bass
    
1262.5Back To The DealerAQUA::ROSTIt's the beat, the beat, the beatWed May 31 1989 14:297
    
    Best idea:  Go back to the dealer and have him set the action to
    where you like it, and then intonate it.  For a new bass, they should
    do this for free.

    Gee Tom, you gotta stay away from those E strings, you seem to have
    nothing but trouble with them.  8^)  8^)  8^)