[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference ayjen1::jensen

Title:	Jensen Support Information
Notice:	FOR OFFICIAL SUPPORT SEE 4.11
Moderator:	caly70.ayo.dec.com::Gordon

Created:	Tue Feb 08 1994
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	616
Total number of notes:	2534

606.0. "DEC200-300 unable to access DVA0 after V7.1 update" by CSC32::M_MONDOZZI () Wed Apr 09 1997 11:05

    DEC200-300 unable to access DVA0 after V7.1 update
    
    This floppy works to run ECU, is seen at the console level and worked
    in V6.1 prior to the update to V7.1
    
    SYSMAN IO AUTOCONFIG/LOG
    IOGEN-E-LOADERR,error config. dev. DVA0:, driver
    		    SYS$DVDRIVER.EXE
    SYSTEM-F-BADPARAM, bad parameter value.
    
     IO PREFIX has SYS$ and autogen has been run with no change.
    
    	Any suggestions would be appreciated.  Consoel firmware
    is at V3.8
    
    Monica

T.R Title User Personal
Name Date Lines

606.1 ZIMBRA::BERNARDO Dave Bernardo, VMS Engineering Wed Apr 09 1997 17:21 6

T.R	Title	User	Personal Name	Date	Lines
606.1		ZIMBRA::BERNARDO	Dave Bernardo, VMS Engineering	`Wed Apr 09 1997 17:21`	6
	This is a bug in V7.1 and a fix was submitted a couple of weeks ago, I don't know if there is a kit available yet. The problem occurs if there is no device in slot 1 on the EISA bus. So, if you can reconfigure the machine you can work-around the problem. d.

    This is a bug in V7.1 and a fix was submitted a couple of weeks
    ago, I don't know if there is a kit available yet.  The problem
    occurs if there is no device in slot 1 on the EISA bus. So, if you
    can reconfigure the machine you can work-around the problem. 
    
    d.