[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference hydra::amiga_v1

Title:AMIGA NOTES
Notice:Join us in the *NEW* conference - HYDRA::AMIGA_V2
Moderator:HYDRA::MOORE
Created:Sat Apr 26 1986
Last Modified:Wed Feb 05 1992
Last Successful Update:Fri Jun 06 1997
Number of topics:5378
Total number of notes:38326

3562.0. "68000/68030 booting" by CACHE::BEAUREGARD (Time to change this message) Thu Mar 08 1990 11:05

    I have a question for all you AMIGA GURUs out there. Ever since I've
    installed my A2630 board, I occasionally experience a system lock-up.
    I have some software which will not run on the 2630 so I find myself
    booting up in 68000 mode. After running the application, I reboot(warm)
    and come up in 68030 mode. The problem only occurs under these
    conditions. Am I correct in assuming that you should only change modes
    (68030/68000) using a cold boot? I did have a problem earlier with RAD. 
    It seems that if I booted up in 68030 mode, my startup sequence would 
    create a RAD. Then if I re-booted in 68000 mode, the memory where I 
    believe RAD was allocated was gone therefor a new RAD was created. Then
    if I rebooted with the 68030 mode, GURU! My guess was that there was
    now two RAD devices and the system choked.
    
    Roger
T.RTitleUserPersonal
Name		DateLines