| If you want to connect an external 3.5", no problem, it will
become drive B:.
But if you want to use your internal drive:
With your bridgeboard, you can only read amiga file on the 3.5"
using MSdos programs provided with your bridge.(AREAD and AWRITE,
Jlink is used to communicate).
If you want to read IBM formatted 3.5" you must have an amiga
program called "transformer". It requires a bootable MSdos
3.5" and work extremely slowly, no graphics, no sound.
Also you would "need" Dos-2-Dos and other utilities for
ease of transfer.
If you want to use one of the internal 3.5", I did it by making
my own cable and adding a wire on the bridge board. This is not
recommended if you are not a "hardware" oriented person. The
cable has to be moved every time I want the 3.5" on the other
CPU, and a switch replaces the jumper required for the presence
of a second amiga floppy.
Vince.
|