Conference smurf::buildhelp

Date Of Receipt: 	29-AUG-1996 16:53:31.15
From: 	FLUME::jmf "Joshua M. Friedman Digital UNIX  29-Aug-1996 1651"
To: 	tea@DEC:.zko.flume, ode@zso.dec.com
CC: 	odehelp@DEC:.zko.flume, rusure::melvin
Subj: 	re: Help needed on failure during bsubmit under de1supportos.nightly

ODE admin and/or Tina, can you please take a look at this problem?  It
dies with this message (full debug attached):

>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process killed by signal 11[ ./kernel/io/cam/qlogic/isp1020.c checked in onto branch 1.1.95 ]

and I've noticed the check-in/submit log is on the long side (54
lines); is this by any chance longer than what you found yesterday was
the threshold ?  If that is the problem what could I have him do to
workaround the problem.

If that's not the problem, do you have any ideas?

thanks...		-josh


------- Forwarded Message

Date: Thu, 29 Aug 1996 11:22:17 -0400
From: melvin@rusure.enet.dec.com (USEG #381-1593 @ZKO3-2/T21)
To: odehelp@wasted.enet.dec.com
Cc: MELVIN
Subject: Help needed on failure during bsubmit under de1supportos.nightly

	I am having trouble getting a bsubmit done into the V32de1 support
	pool (nightly).  When I originally did the bsubmit, I received the
	error given below.  Any idea what I am doing wrong this time (other
	pools, with similar bsubmits have worked fine).  Can I delete any
	of the tracking files to basically 'reset' this and just do a fresh
	bsubmit (without the need for -resub)?  Thanks in advance.

	At the very end of this message is an attempt to do the -resub
	using -verbose -debug -odedebug cvs (at Josh Friedman's suggestion).

- -Joe Melvin
 USEG

===============================================================================
==== original bsubmit

jmroid> bsubmit -all
Enter the defect number this submission applies to: v32de1supportos-60-melvin


Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes]

*** No user interaction will be required during the merge step. ***
[ ./kernel/io/cam/qlogic/isp1020.c checked in onto branch 1.1.95 ]
[ ./kernel/io/cam/qlogic/isp1020.h checked in onto branch 1.1.63 ]

Please take appropriate steps and re-submit.

*** RE-SUBMISSION REQUIRED ***

- - Source control information is in an intermediate state.
- - Re-submit using -resub 17:07 [ -date 8/26/96 ]
                                                             


The above is totally devoid of content to let me know what was going on.  The
files were outdated, even though the submit did not successfully go through.
They do not appear have been puit into the de1 support pool either.  When I
try to do the -resub as 'suggested', I get the following:


jmroid> bsubmit -resub 17:07 -date 8/26/96 -verbose
Enter the defect number this submission applies to: v32de1supportos-60-melvin

>  build to submit to is: v32de1supportos.
>  Time is: 10:04; date is: 8/29/96.
>  cd'ing to sandbox source directory: /SANDBOX3/A___isp1020_v32de1/src.
>  checking for lock on build: /usr/sde/osf1/build/v32de1supportos/src/.BCSlock
>  checking access control list on submit
Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes] yes
>  Checking environment...
>  checking HOLD file: 17:07.Thold /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
>  checking HOLD file: 17:07.Thold /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
>  Submitting the following files:
>  ./kernel/io/cam/qlogic/isp1020.c
>  ./kernel/io/cam/qlogic/isp1020.h
>  Validating submission...
>  Common ancestor -p1.1.39.3, merge required
>  Common ancestor -p1.1.27.2, merge required
>  Checking files in; Set: 'V32DE1SUPPORTOS'
>  ./kernel/io/cam/qlogic/isp1020.c
>  Scanning for HISTORY and $Log...$ messages
[ ./kernel/io/cam/qlogic/isp1020.c checked in onto branch 1.1.95 ]

Please take appropriate steps and re-submit.

*** RE-SUBMISSION REQUIRED ***

- - Source control information is in an intermediate state.
- - Re-submit using -resub 17:07 [ -date 8/26/96 ]
                                                                          


===============================================================================
===============================================================================



jmroid> !5
bsubmit -resub 17:07 -date 8/26/96 -verbose -debug -odedebug csv
Enter the defect number this submission applies to: v32de1supportos-60-melvin

>> DEBUG INFO in ui_init:
>> Contents of interface table:
>> 1 : -nolog: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     -local_co: maxe=1; dup=0; mina=0; maxa=2; a=backing lock.
>> 3 : -sb: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     -resub: maxe=1; dup=0; mina=1; maxa=1; a=[0-9]:[0-5][0-9] [12][0-9]:[0-5][0-9].
>>     e=-resub; numa=1; nume=1.
>>       arg: 17:07.
>> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     e=-auto; numa=0; nume=1.
>> 13: -novisual: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     -tag: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 14: -all: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 16: -config: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 17: -auto_ci: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 19: -auto_out: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     -l: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>>     -visual: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     -log: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>>     -m: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 22: -no_merge: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 25: -noauto_out: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     !-*: maxe=-1; dup=0; mina=0; maxa=0; a=.
>> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 30: -defect: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>>     e=-defect; numa=1; nume=1.
>>       arg: v32de1supportos-60-melvin.
>> 32: -date: maxe=1; dup=0; mina=1; maxa=1; a=[1-9]/[1-9]/[0-9][0-9] [1-9]/[1-3][0-9]/[0-9][0-9] 1[0-2]/[1-9]/[0-9][0-9] 1[0-2]/[1-3][0-9]/[0-9][0-9].
>>     e=-date; numa=1; nume=1.
>>       arg: 8/26/96.
>> 36: -fn: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 37: -set: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 46: -no_build_ci: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 52: -no_build_co: maxe=1; dup=0; mina=0; maxa=0; a=.
>> vl=7; ap=8; ip=42.
>> DEBUG INFO in current_sb:
>> Found sb name in environment.  Name is: A___isp1020_v32de1.
>> DEBUG INFO in current_sb:
>> sb name is in rc file.  Name is: A___isp1020_v32de1.
>> DEBUG INFO in current_sb:
>> Found base dir in rcfile. Dir is: /SANDBOX3.
>> DEBUG INFO in current_sb:
>> Using default sandbox rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> current sandbox: A___isp1020_v32de1
>> sandbox has base dir: /SANDBOX3
>> using user's rc file: /usr/users/melvin/.sandboxrc
>> using sandbox's rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local
>> DEBUG INFO in current_sb:
>> sb name is in rc file.  Name is: A___isp1020_v32de1.
>> DEBUG INFO in current_sb:
>> Found base dir in rcfile. Dir is: /SANDBOX3.
>> DEBUG INFO in current_sb:
>> Using default sandbox rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local.
>> DEBUG INFO in current_set:
>> found default set, Joseph_Melvin_A___isp1020_v32de1, in sb rcfile.
>> DEBUG INFO in current_sb:
>> sb name is in rc file.  Name is: A___isp1020_v32de1.
>> DEBUG INFO in current_sb:
>> Found base dir in rcfile. Dir is: /SANDBOX3.
>> DEBUG INFO in current_sb:
>> Using default sandbox rc file: /SANDBOX3/A___isp1020_v32de1/rc_files/local.
>> DEBUG INFO in current_set:
>> matched set, Joseph_Melvin_A___isp1020_v32de1, and setdir, ., in sb rcfile.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> from the set: Joseph_Melvin_A___isp1020_v32de1
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> check_out_config is 'V32DE1SUPPORTOS_NIGHTLY;MP1OS;V32CSUPPORTOS_NIGHTLY;<>'
>  build to submit to is: v32de1supportos.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> directory path to build is: /usr/sde/osf1/build.
>> directory to build source is: /usr/sde/osf1/build/v32de1supportos/src.
>> set name for build is: V32DE1SUPPORTOS.
>> use build's rc file: /usr/sde/osf1/build/v32de1supportos/.sandboxrc.
>> submission cover: /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_client.
>> submission host: secret.zk3.dec.com.
>> submission base: /usr/sde/osf1/build/v32de1supportos/logs.
>> submission owner: devbld.
>> will ask for defect numbers.
>  Time is: 11:12; date is: 8/29/96.
>  cd'ing to sandbox source directory: /SANDBOX3/A___isp1020_v32de1/src.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> The following files and directories will be used:
>> 17:07.Tlog
>> 17:07.Tsnapshot
>> 17:07.Tdefunct
>> 17:07.Tundefunct
>> 17:07.Trevert
>> 17:07.Thold
>> /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
>> /SANDBOX3/A___isp1020_v32de1/src/17:07.Joseph_Melvin
>> /SANDBOX3/A___isp1020_v32de1/src/17:07.bcssteps
>> : Joseph_Melvin; Date: 8/26/96; Time: 17:07
>  checking for lock on build: /usr/sde/osf1/build/v32de1supportos/src/.BCSlock
ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
ODE CLIENT: logsubmit is_submit_locked -debug /usr/sde/osf1/build/v32de1supportos/src/.BCSlock
ODE CLIENT: SERVER Host =secret.zk3.dec.com
ODE CLIENT: SERVER Pool =/usr/sde/osf1/build/v32de1supportos/logs
ODE CLIENT: POOL   Owner=devbld
ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
ODE CLIENT: CLIENT SOCKET ADDRESS = 549
ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
ODE CLIENT: ---- SENDING AUTHORIZATION ----
ODE CLIENT: No KERBEROS REQUIRED
ODE CLIENT: ---- AUTHORIZATION OK ----
ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
        ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
        ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
        ODE_SERVER: principal name is Joseph_Melvin
        ODE_SERVER: ode file pool /usr/sde/osf1/build/v32de1supportos/logs, tree_owner is devbld
        ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
        ODE_SERVER: ==== CHECKING AUTHORIZATION ====
        ODE_SERVER: DOING CLIENT VERIFICATION.
        ODE_SERVER: ==== AUTHORIZATION OK ====
        ODE_SERVER: ==== CHECKING CONFIGURATION ====
        ODE_SERVER: ==== CONFIGURATION OK ====
        ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
        ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
        ODE_SERVER: SERVER TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
        ODE_SERVER: COMMAND:
        /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec is_submit_locked -debug /usr/sde/osf1/build/v32de1supportos/src/.BCSlock
>> DEBUG INFO in ui_init:
>> Contents of interface table:
>> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     e=-auto; numa=0; nume=1.
>> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 25: !-*: mODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
ODE CLIENT: ---- CLIENT EXIT STATUS = 0  IN 4 bytes----
axe=2; dup=0; mina=0; maxa=0; a=.
>>     e=/usr/sde/osf1/build/v32de1supportos/src/.BCSlock; numa=0; nume=1.
>> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
>> vl=7; ap=8; ip=42.
        ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
        ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
        ODE_SERVER: sending exit status to client. 0
        ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 25199
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process exited with 0ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
ODE CLIENT: logsubmit submit_acl_check -debug submit.acl
ODE CLIENT: SERVER Host =secret.zk3.dec.com
ODE CLIENT: SERVER Pool =/usr/sde/osf1/build/v32de1supportos/logs
ODE CLIENT: POOL   Owner=devbld
ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
ODE CLIENT: CLIENT SOCKET ADDRESS = 549
ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
ODE CLIENT: ---- SENDING AUTHORIZATION ----
ODE CLIENT: No KERBEROS REQUIRED
ODE CLIENT: ---- AUTHORIZATION OK ----
ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
        ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
        ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
        ODE_SERVER: principal name is Joseph_Melvin
        ODE_SERVER: ode file pool /usr/sde/osf1/build/v32de1supportos/logs, tree_owner is devbld
        ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
        ODE_SERVER: ==== CHECKING AUTHORIZATION ====
        ODE_SERVER: DOING CLIENT VERIFICATION.
        ODE_SERVER: ==== AUTHORIZATION OK ====
        ODE_SERVER: ==== CHECKING CONFIGURATION ====
        ODE_SERVER: ==== CONFIGURATION OK ====
        ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
        ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
        ODE_SERVER: SERVER TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
        ODE_SERVER: COMMAND:
        /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec submit_acl_check -debug submit.acl
>> DEBUG INFO in ui_init:
>> Contents of interface table:
>> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     e=-auto; numa=0; nume=1.
>> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 25: !-*: maxe=2; dup=0; mina=0; maxa=0; a=.
>>     e=submit.acl; numa=0; nume=1.
>> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
>> vl=7; ap=8; ip=42.
ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
ODE CLIENT: ---- CLIENT EXIT STATUS = 0  IN 4 bytes----
        ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
        ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
        ODE_SERVER: sending exit status to client. 0
        ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 25267
>  checking access control list on submit>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process exited with 0
Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes] Yes
>  Checking environment...
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> org_dir is './kernel/io/cam/qlogic'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_init
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_check_env
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_check_env
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Composing list of legal copyright markers.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> copyright rc variable: (starts on next line)
>> DEC_COPYRIGHT;DEC_COPYRIGHT_MIN;DEC_COPYRIGHT_MAX;DEC_COPYRIGHT_FSF
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Looking for copyright markers in string:
>> DEC_COPYRIGHT;DEC_COPYRIGHT_MIN;DEC_COPYRIGHT_MAX;DEC_COPYRIGHT_FSF
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entry 1: DEC_COPYRIGHT
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entry 2: DEC_COPYRIGHT_MIN
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entry 3: DEC_COPYRIGHT_MAX
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entry 4: DEC_COPYRIGHT_FSF
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_init
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering setup_for_bcs
>  checking HOLD file: 17:07.Thold /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
ODE CLIENT: logsubmit -t2 2 copyfile /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold 17:07.Thold -debug
ODE CLIENT: SERVER Host =secret.zk3.dec.com
ODE CLIENT: SERVER Pool =/usr/sde/osf1/build/v32de1supportos/logs
ODE CLIENT: POOL   Owner=devbld
ODE CLIENT: CLIENT will send & receive a data file.
ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
ODE CLIENT: CLIENT SOCKET ADDRESS = 549
ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
ODE CLIENT: ---- SENDING AUTHORIZATION ----
ODE CLIENT: No KERBEROS REQUIRED
ODE CLIENT: ---- AUTHORIZATION OK ----
ODE CLIENT: ---- SENDING DATA FILE TO THE SERVER ----
        ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
        ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
ODE CLIENT: Sending 17:07.Thold, permissions 644, with 110 bytes to the server.
ODE CLIENT: -------DONE SENDING FILE TO SERVER-------
ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
        ODE_SERVER: principal name is Joseph_Melvin
        ODE_SERVER: ode file pool /usr/sde/osf1/build/v32de1supportos/logs, tree_owner is devbld
        ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
        ODE_SERVER: ==== CHECKING AUTHORIZATION ====
        ODE_SERVER: DOING CLIENT VERIFICATION.
        ODE_SERVER: ==== AUTHORIZATION OK ====
        ODE_SERVER: ==== CHECKING CONFIGURATION ====
        ODE_SERVER: ==== CONFIGURATION OK ====
        ODE_SERVER: Client sending file with permissions 0644, size 110
        ODE_SERVER: Receiving client file OdeSrvrTmpJoseph_Melvin025266/17:07.Thold
        ODE_SERVER: Read 110 from client. Wrote 110 to OdeSrvrTmpJoseph_Melvin025266/17:07.Thold
        ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
        ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
        ODE_SERVER: SERVER TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
        ODE_SERVER: COMMAND:
        /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec copyfile /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold OdeSrvrTmpJoseph_Melvin025266/17:07.Thold -debug
ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
ODE CLIENT: ---- RECEIVE DATA FILE FROM SERVER ----
>> DEBUG INFO in ui_init:
>> Contents of interface table:
>> 6 : -noauto: maxe=1; dup=0; mina=0; maxa=0; a=.
>> 8 : -auto: maxe=1; dup=0; mina=0; maxa=0; a=.
>>     e=-auto; numa=0; nume=1.
>> 20: -sb_rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 25: !-*: maxe=2; dup=0; mina=0; maxa=0; a=.
>>     e=/usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold; numa=0; nume=2.
>>     e=OdeSrvrTmpJoseph_Melvin025266/17:07.Thold: numa=0.
>> 26: -rc: maxe=1; dup=0; mina=1; maxa=1; a=!-*.
>> 42: -info: maxe=1; dup=0; mina=0; maxa=0; a=.
>> vl=7; ap=8; ip=42.
>> DEBUG INFO in copyfile:
>> Arg[0] is: /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold.
>> DEBUG INFO in copyfile:
>> Arg[1] is: OdeSrvrTmpJoseph_Melvin025266/17:07.Thold.
>> DEBUG INFO in copyfile:
>> copy_hold: /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold --> OdeSrvrTmpJoseph_Melvin025266/17:07.Thold
>> DEBUG INFO in copyfile:
>> filename is: Thold.
        ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
        ODE_SERVER: SENDING file OdeSrvrTmpJoseph_Melvin025266/17:07.Thold to the client.
        ODE_SERVER: SENDING a total of 110 bytes to the client.
        ODE_SERVER: Wrote 110 bytes to the client.
        ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
        ODE_SERVER: sending exit status to client. 0
        ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 25266
ODE CLIENT: Socket read 110 bytes
ODE CLIENT: Write to file 17:07.Thold 110 bytes
ODE CLIENT: -------DONE RECEIVING FILE FROM SERVER-------
ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
ODE CLIENT: ---- CLIENT EXIT STATUS = 0  IN 4 bytes----
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process exited with 0>  checking HOLD file: 17:07.Thold /usr/sde/osf1/build/v32de1supportos/logs/bsubmit.hold
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_new_list
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_new_list
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_add_to_list at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> org_path = /./kernel/io/cam/qlogic   file_name = ./kernel/io/cam/qlogic/isp1020.c
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> tbuf = ./kernel/io/cam/qlogic = (buf without leading slash)
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> buf = ./kernel/io/cam/qlogic/isp1020.c = (tbuf + file_name or just file_name)
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Adding ./kernel/io/cam/qlogic/isp1020.c to a list.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_add_to_list at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_add_to_list at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> org_path = /./kernel/io/cam/qlogic   file_name = ./kernel/io/cam/qlogic/isp1020.h
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> tbuf = ./kernel/io/cam/qlogic = (buf without leading slash)
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> buf = ./kernel/io/cam/qlogic/isp1020.h = (tbuf + file_name or just file_name)
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Adding ./kernel/io/cam/qlogic/isp1020.h to a list.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_add_to_list at depth 0.
>  Submitting the following files:
>  ./kernel/io/cam/qlogic/isp1020.c
>  ./kernel/io/cam/qlogic/isp1020.h
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving setup_for_bcs
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering validate_submission
>  Validating submission...
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_read_leader
ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.c
ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
ODE CLIENT: ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.c
ODE CLIENT: SERVER Host =buffer.zk3.dec.com
ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
ODE CLIENT: POOL   Owner=devrcs
ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
ODE CLIENT: CLIENT SOCKET ADDRESS = 549
        ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
        ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
ODE CLIENT: ---- SENDING AUTHORIZATION ----
ODE CLIENT: No KERBEROS REQUIRED
ODE CLIENT: ---- AUTHORIZATION OK ----
ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
        ODE_SERVER: principal name is Joseph_Melvin
        ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is devrcs
        ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
        ODE_SERVER: ==== CHECKING AUTHORIZATION ====
        ODE_SERVER: DOING CLIENT VERIFICATION.
        ODE_SERVER: ==== AUTHORIZATION OK ====
        ODE_SERVER: ==== CHECKING CONFIGURATION ====
        ODE_SERVER: ==== CONFIGURATION OK ====
        ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
        ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
        ODE_SERVER: SERVER TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
        ODE_SERVER: COMMAND:
        /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rlog -h ./kernel/io/cam/qlogic/isp1020.c
ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
ODE CLIENT: ---- CLIENT EXIT STATUS = 0  IN 4 bytes----
        ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
        ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
        ODE_SERVER: sending exit status to client. 0
        ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 7380
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process exited with 0>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> In sci_read_leader, leader is ' * '
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_read_leader
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> In sci_lookup_leader_list, leader is ' * '
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> In sci_lookup_leader_list, leader is ' * '
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_read_leader
ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.h
ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
ODE CLIENT: ode_client rlog -h ./kernel/io/cam/qlogic/isp1020.h
ODE CLIENT: SERVER Host =buffer.zk3.dec.com
ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
ODE CLIENT: POOL   Owner=devrcs
ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
ODE CLIENT: CLIENT SOCKET ADDRESS = 549
ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
ODE CLIENT: ---- SENDING AUTHORIZATION ----
ODE CLIENT: No KERBEROS REQUIRED
ODE CLIENT: ---- AUTHORIZATION OK ----
ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
        ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
        ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
        ODE_SERVER: principal name is Joseph_Melvin
        ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is devrcs
        ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
        ODE_SERVER: ==== CHECKING AUTHORIZATION ====
        ODE_SERVER: DOING CLIENT VERIFICATION.
        ODE_SERVER: ==== AUTHORIZATION OK ====
        ODE_SERVER: ==== CHECKING CONFIGURATION ====
ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
ODE CLIENT: ---- CLIENT EXIT STATUS = 0  IN 4 bytes----
        ODE_SERVER: ==== CONFIGURATION OK ====
        ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
        ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
        ODE_SERVER: SERVER TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
        ODE_SERVER: COMMAND:
        /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rlog -h ./kernel/io/cam/qlogic/isp1020.h
        ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
        ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
        ODE_SERVER: sending exit status to client. 0
        ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 17655
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process exited with 0>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> In sci_read_leader, leader is ' * '
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_read_leader
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> In sci_lookup_leader_list, leader is ' * '
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> In sci_lookup_leader_list, leader is ' * '
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> pattern: -config_update, not in entry table.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_config_lookup
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_config_lookup
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> config_rev is '1.1.39.3'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> pattern: -config_update, not in entry table.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_config_lookup
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_config_lookup
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> config_rev is '1.1.27.2'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_lookup_user_rev_list.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_lookup_revision
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering rcsfullstat at depth 0.
ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.c
ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
ODE CLIENT: ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.c
ODE CLIENT: SERVER Host =buffer.zk3.dec.com
ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
ODE CLIENT: POOL   Owner=devrcs
ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
ODE CLIENT: CLIENT SOCKET ADDRESS = 549
ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
ODE CLIENT: ---- SENDING AUTHORIZATION ----
ODE CLIENT: No KERBEROS REQUIRED
ODE CLIENT: ---- AUTHORIZATION OK ----
ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
        ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
        ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
        ODE_SERVER: principal name is Joseph_Melvin
        ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is devrcs
        ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
        ODE_SERVER: ==== CHECKING AUTHORIZATION ====
        ODE_SERVER: DOING CLIENT VERIFICATION.
        ODE_SERVER: ==== AUTHORIZATION OK ====
        ODE_SERVER: ==== CHECKING CONFIGURATION ====
ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
        ODE_SERVER: ==== CONFIGURATION OK ====
        ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
        ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
        ODE_SERVER: SERVER TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
        ODE_SERVER: COMMAND:
        /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.c
ODE CLIENT: ---- CLIENT EXIT STATUS = 0  IN 4 bytes----
        ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
        ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
        ODE_SERVER: sending exit status to client. 0
        ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 2638
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process exited with 0>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rcsstat returned revision 1.1.92.2
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving rcsfullstat at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_lookup_revision
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> ver_user, def_str '1.1.92.2', ''
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_lookup_revision
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering rcsfullstat at depth 0.
ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.h
ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
ODE CLIENT: ode_client rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.h
ODE CLIENT: SERVER Host =buffer.zk3.dec.com
ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
ODE CLIENT: POOL   Owner=devrcs
ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
ODE CLIENT: CLIENT SOCKET ADDRESS = 549
ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
ODE CLIENT: ---- SENDING AUTHORIZATION ----
ODE CLIENT: No KERBEROS REQUIRED
ODE CLIENT: ---- AUTHORIZATION OK ----
ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
        ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
        ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
        ODE_SERVER: principal name is Joseph_Melvin
        ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is devrcs
        ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
        ODE_SERVER: ==== CHECKING AUTHORIZATION ====
        ODE_SERVER: DOING CLIENT VERIFICATION.
        ODE_SERVER: ==== AUTHORIZATION OK ====
        ODE_SERVER: ==== CHECKING CONFIGURATION ====
        ODE_SERVER: ==== CONFIGURATION OK ====
        ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
        ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
        ODE_SERVER: SERVER TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
        ODE_SERVER: COMMAND:
        /usr/sde/ode3.0/toolsODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
ODE CLIENT: ---- CLIENT EXIT STATUS = 0  IN 4 bytes----
/alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V -rJoseph_Melvin_A___isp1020_v32de1 ./kernel/io/cam/qlogic/isp1020.h
        ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
        ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
        ODE_SERVER: sending exit status to client. 0
        ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 3488
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process exited with 0>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rcsstat returned revision 1.1.61.3
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving rcsfullstat at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_lookup_revision
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> ver_user, def_str '1.1.61.3', ''
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_lookup_user_rev_list.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_is_branch at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_is_branch at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_lookup_merge_rev_list at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rev_str 'V32DE1SUPPORTOS'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> config_str ';V32DE1SUPPORTOS_NIGHTLY;MP1OS;V32CSUPPORTOS_NIGHTLY;<>'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_lookup_revision
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering rcsfullstat at depth 1.
ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.c
ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
ODE CLIENT: ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.c
ODE CLIENT: SERVER Host =buffer.zk3.dec.com
ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
ODE CLIENT: POOL   Owner=devrcs
ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
ODE CLIENT: CLIENT SOCKET ADDRESS = 549
ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
ODE CLIENT: ---- SENDING AUTHORIZATION ----
ODE CLIENT: No KERBEROS REQUIRED
ODE CLIENT: ---- AUTHORIZATION OK ----
ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
        ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
        ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
        ODE_SERVER: principal name is Joseph_Melvin
        ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is devrcs
        ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
        ODE_SERVER: ==== CHECKING AUTHORIZATION ====
        ODE_SERVER: DOING CLIENT VERIFICATION.
        ODE_SERVER: ==== AUTHORIZATION OK ====
        ODE_SERVER: ==== CHECKING CONFIGURATION ====
        ODE_SERVER: ==== CONFIGURATION OK ====
        ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
        ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
        ODE_SERVER: SERVER TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
        ODE_SERVER: COMMAND:
        /usr/sde/ode3.0/toolsODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
ODE CLIENT: ---- CLIENT EXIT STATUS = 0  IN 4 bytes----
/alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.c
        ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
        ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
        ODE_SERVER: sending exit status to client. 0
        ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 24227
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process exited with 0>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rcsstat returned revision 1.1.95.1
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving rcsfullstat at depth 1.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_lookup_revision
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Setting ver_merge to '1.1.95.1'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_lookup_revision
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering rcsfullstat at depth 1.
ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.h
ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
ODE CLIENT: ode_client rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.h
ODE CLIENT: SERVER Host =buffer.zk3.dec.com
ODE CLIENT: SERVER Pool =/usr/sde/osf1/rcs/os/src
ODE CLIENT: POOL   Owner=devrcs
ODE CLIENT: BCSTEMP=/SANDBOX3/A___isp1020_v32de1/tmp
ODE CLIENT: CLIENT SOCKET ADDRESS = 549
ODE CLIENT: ---- SOCKET CONNECTIONS OK ----.
ODE CLIENT: ---- SENDING REMOTE COMMAND LIST TO THE SERVER ----
ODE CLIENT: ---- SENDING AUTHORIZATION ----
ODE CLIENT: No KERBEROS REQUIRED
ODE CLIENT: ---- AUTHORIZATION OK ----
ODE CLIENT: ---- WAITING FOR SERVER TO COMPLETE REMOTE COMMAND ----
        ODE_SERVER: ==== SOCKET CONNECTIONS OK ====
        ODE_SERVER: ==== RECEIVEING REMOTE COMMAND LIST ====
        ODE_SERVER: principal name is Joseph_Melvin
        ODE_SERVER: ode file pool /usr/sde/osf1/rcs/os/src, tree_owner is devrcs
        ODE_SERVER: ==== REMOTE COMMAND LIST OK ====
        ODE_SERVER: ==== CHECKING AUTHORIZATION ====
        ODE_SERVER: DOING CLIENT VERIFICATION.
        ODE_SERVER: ==== AUTHORIZATION OK ====
        ODE_SERVER: ==== CHECKING CONFIGURATION ====
ODE CLIENT: ---- SERVER COMPLETED REMOTE COMMAND ----
ODE CLIENT: ---- RECEIVING SERVER COMMAND FINISH STATUS ----
ODE CLIENT: ---- CLIENT EXIT STATUS = 0  IN 4 bytes----
        ODE_SERVER: ==== CONFIGURATION OK ====
        ODE_SERVER: ==== EXECUTE CLIENT COMMAND ====
        ODE_SERVER: PRINCIPAL PRINCIPAL=Joseph_Melvin
        ODE_SERVER: SERVER TOOLS:SERVER_TOOL_BIN=/usr/sde/ode3.0/tools/alpha_UNIX/bin
        ODE_SERVER: COMMAND:
        /usr/sde/ode3.0/tools/alpha_UNIX/lib/ode_server_exec rcsstat -q -D -V -rV32DE1SUPPORTOS ./kernel/io/cam/qlogic/isp1020.h
        ODE_SERVER: ==== CLIENT COMMAND COMPLETE ====
        ODE_SERVER: ==== SEND COMMAND EXIT STATUS TO CLIENT ====
        ODE_SERVER: sending exit status to client. 0
        ODE_SERVER: ODE SERVER:Finished pid of MASTER->CHILD->PARENT 29169
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process exited with 0>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rcsstat returned revision 1.1.63.2
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving rcsfullstat at depth 1.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_lookup_revision
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Setting ver_merge to '1.1.63.2'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_lookup_merge_rev_list at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_ancestor_list
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_setup_merge
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_setup_merge
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_prep_merge
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> before. R1 :-p1.1.95.1: R2 :-p1.1.92.2: R3 :-p
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_ancestor
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> config 'b' is '1.1.39.3'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> comparison yields '-1'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rev3 (1) is :1.1.39.3:
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering checkancestor routine.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving checkancestor routine.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rev3 (2) is :1.1.39.3:
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_ancestor
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> after.  R1 :-p1.1.95.1: R2 :-p1.1.92.2: R3 :1.1.39.3
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_prep_merge
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rev1,2,3: '-p1.1.95.1' '-p1.1.92.2' '-p1.1.39.3'
>  Common ancestor -p1.1.39.3, merge required
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_prep_merge
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_prep_merge
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> before. R1 :-p1.1.63.2: R2 :-p1.1.61.3: R3 :-p
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_ancestor
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> config 'b' is '1.1.27.2'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> comparison yields '-1'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rev3 (1) is :1.1.27.2:
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering checkancestor routine.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving checkancestor routine.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rev3 (2) is :1.1.27.2:
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_ancestor
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> after.  R1 :-p1.1.63.2: R2 :-p1.1.61.3: R3 :1.1.27.2
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_prep_merge
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rev1,2,3: '-p1.1.63.2' '-p1.1.61.3' '-p1.1.27.2'
>  Common ancestor -p1.1.27.2, merge required
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_prep_merge
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving validate_submission
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_trackfile
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_trackfile
>> DEBUG INFO in current_sb:
>> sb name is in rc file.  Name is: v32de1supportos.
>> DEBUG INFO in current_sb:
>> Found base dir in rcfile. Dir is: /usr/sde/osf1/build.
>> DEBUG INFO in current_sb:
>> Found sandbox rc file in usr rcfile. File is: local.sharedsandbox.
>  Checking files in; Set: 'V32DE1SUPPORTOS'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_check_in_list at depth 0.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> mesgfile is '/SANDBOX3/A___isp1020_v32de1/tmp/_LOG_'
>  ./kernel/io/cam/qlogic/isp1020.c
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering check_path at depth 1.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering check_path
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving check_path at depth 1.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving check_path
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> begin_atomic
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering copy_file
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> src :./kernel/io/cam/qlogic/isp1020.c:
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> dst :/SANDBOX3/A___isp1020_v32de1/tmp/isp1020.c:
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving copy_file: rename successful
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering sci_xtract_log at depth 1.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_lookup_logmsg at depth 2.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rev is '1.1.92.2'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> In src_ctl_lookup_logmsg mesgfile is '/SANDBOX3/A___isp1020_v32de1/tmp/_LOG_'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_extract_history at depth 3.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> rev is 'NULL pointer'
>  Scanning for HISTORY and $Log...$ messages
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering process_log_messages at depth 4.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> leader ' * '
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> nrev '0'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving process_log_messages at depth 4.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_extract_history at depth 3.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_lookup_logmsg at depth 2.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_xtract_log at depth 1.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> logmsg is ''
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering okmesg at depth 1.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving okmesg at depth 1.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> logmsg is '  Port of changes into V32DE1.  Code changes provided by Dick Bagley.
        The following audit trail lists the various problems fixed by his
        code changes.

                     1996/06/25  14:20:42  Dick_Bagley
             Fix for mailbox command failure in isp_init() on system
             reboots that started occurring with the HW6/BL6 form of
             the driver. Fixes for QARs 46071, 46139, 46703, 46756,
             46757, 46761 and 46885.

                     1996/04/23  13:06:43  Dick_Bagley
             o Backport of PTHW1 fix for an IPL problem in isp_mailboxissue()/
               isp_mailboxcomplete() that prevented booting under PTHW1.
             o Incorporated flag definitions/CSEC status codes from newer Qlogic
               spec's.
             o Some BDR tweaks resulting from recent (post-rev 1.1.48.5) BDR
               testing.

                     1996/04/02  13:50:34  Dick_Bagley
             Fixed lockmode 4 violations (QAR 45122), and eliminated a CAM_ERROR
             reported during installation for data phase underruns (actually
             resulting from Mode Sense commands as issued by install).

                     1996/03/12  15:06:24  Dick_Bagley
             o Fix for QAR 42908 (lock timeout panic when isp_abort mailbox
               command fails), and plugged timing holes that might occur
               if an abort is completed by a 3rd-party SCSI reset.
             o Fixes for QAR's 42761, 43719 and 44474.
             o Included fixes required as part of Fast20 testing with advanced
               Qlogic 1040A board.
             o Changed a bunch of printf's into CAM_ERROR calls for error logging.

                     1996/02/07  18:47:04  Dick_Bagley
             Version 3 NVRAM data structure support and Fast20 enablers.

                     1996/01/16  15:46:01  Dick_Bagley
                o Fixes for QARs 40361 (H), 40443 (S) and 41465(H).
                  All of these QARs are related: they involve locking
                  problems that occur during processing of Aborts.
                  Several other fixes are also included:
                     - Fixed memory leaks on probe failure.
                     - Fixed memory leak during abort processing.
                     - Fixed an xpt: callback on freed ccb panic
                       that occurred during 3rd-party reset processing.
                     - Fixed problems that occurred if a 3rd-party
                       reset is received during abort processing.
                     - Fixed problem that occurs if a mailbox operation
                       fails during probe (if isp_reinit() is called before
                       the job list and cam data structures are valid).
        [1996/08/07  20:08:43  Joseph_Melvin]
'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Before calling src_ctl_check_in, ver_merge is '1.1.95.1'
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_check_in at depth 1.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering src_ctl_check_in
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Entering get_ancestor_rev_for_merge at depth 2.
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving get_ancestor_rev_for_merge at depth 2.
ode_client -t2 5 ci -f -sExp -u1.1.95 -m        ** Merge Information **
                ** Command used:        bsubmit -visual **
                ** Ancestor revision:   1.1.39.3 **
                ** Merge revision:      1.1.95.1 **
        ** End **
        Port of changes into V32DE1.  Code changes provided by Dick Bagley.
        The following audit trail lists the various problems fixed by his
        code changes.

                     1996/06/25  14:20:42  Dick_Bagley
             Fix for mailbox command failure in isp_init() on system
             reboots that started occurring with the HW6/BL6 form of
             the driver. Fixes for QARs 46071, 46139, 46703, 46756,
             46757, 46761 and 46885.

                     1996/04/23  13:06:43  Dick_Bagley
             o Backport of PTHW1 fix for an IPL problem in isp_mailboxissue()/
               isp_mailboxcomplete() that prevented booting under PTHW1.
             o Incorporated flag definitions/CSEC status codes from newer Qlogic
               spec's.
             o Some BDR tweaks resulting from recent (post-rev 1.1.48.5) BDR
               testing.

                     1996/04/02  13:50:34  Dick_Bagley
             Fixed lockmode 4 violations (QAR 45122), and eliminated a CAM_ERROR
             reported during installation for data phase underruns (actually
             resulting from Mode Sense commands as issued by install).

                     1996/03/12  15:06:24  Dick_Bagley
             o Fix for QAR 42908 (lock timeout panic when isp_abort mailbox
               command fails), and plugged timing holes that might occur
               if an abort is completed by a 3rd-party SCSI reset.
             o Fixes for QAR's 42761, 43719 and 44474.
             o Included fixes required as part of Fast20 testing with advanced
               Qlogic 1040A board.
             o Changed a bunch of printf's into CAM_ERROR calls for error logging.

                     1996/02/07  18:47:04  Dick_Bagley
             Version 3 NVRAM data structure support and Fast20 enablers.

                     1996/01/16  15:46:01  Dick_Bagley
                o Fixes for QARs 40361 (H), 40443 (S) and 41465(H).
                  All of these QARs are related: they involve locking
                  problems that occur during processing of Aborts.
                  Several other fixes are also included:
                     - Fixed memory leaks on probe failure.
                     - Fixed memory leak during abort processing.
                     - Fixed an xpt: callback on freed ccb panic
                       that occurred during 3rd-party reset processing.
                     - Fixed problems that occurred if a 3rd-party
                       reset is received during abort processing.
                     - Fixed problem that occurs if a mailbox operation
                       fails during probe (if isp_reinit() is called before
                       the job list and cam data structures are valid).
        [1996/08/07  20:08:43  Joseph_Melvin]
 isp1020.c ./kernel/io/cam/qlogic/isp1020.c,v
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_check_in at depth 1.
ODE CLIENT:

        ********** ODE_CLIENT START **********
ODE CLIENT: DEBUG Mode [CLIENT,SERVER,]
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> process killed by signal 11[ ./kernel/io/cam/qlogic/isp1020.c checked in onto branch 1.1.95 ]
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving src_ctl_check_in
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> end_atomic
>> DEBUG INFO in /usr/sde/ode3.0/tools/alpha_osf1/bin/ode/bsubmit:
>> Leaving sci_check_in_list at depth 0.

Please take appropriate steps and re-submit.

*** RE-SUBMISSION REQUIRED ***

- - Source control information is in an intermediate state.
- - Re-submit using -resub 17:07 [ -date 8/26/96 ]




------- End of Forwarded Message