Conference smurf::buildhelp

2169.0. "Re: submit difficulties [to ptqa]" by AOSG::FILTER (Automatic Posting Software - mail to flume::puck) Wed Mar 27 1996 20:10

Date Of Receipt: 	23-MAR-1996 00:37:29.39
From: 	SMURF::WASTED::jmf "Joshua M. Friedman OSF/UNIX SDE  23-Mar-1996 0034"
To: 	Rahul Kher USG <rahul@DEC:.zko.wasted>
CC: 	odehelp@DEC:.zko.wasted, dc@DEC:.zko.wasted
Subj: 	Re: submit difficulties [to ptqa]

Rahul,

You were correct to examin the .BCSset-* file; this indeed looks ok.
It may very well be that you are in a different set within your sandbox
than when you did the bco (and presumably you've done the bci ok too).
Remember the workon syntax is "workon -sb sandboxname setname" and,
both "-sb sandboxname" and "setname" can be left off yielding the default
sandbox (specified at the top of your ~/.sandboxrc) or the default set
for the sandbox (which is == the sandboxname).

You can check what ODE thinks is your current environment using
"currentsb -all" -- this will show the sandbox, followed by the full
setname, which should be Rahul_Kher_ptqa; the last item shown is the
actual tree you're currently backed to.

Please check this and report what you find.  If this doesn't point out
a problem, please re-run the bsubmit with "-verbose -debug -odedebug
csv" and capture this output, along with "currentsb -all" and "sbinfo"
and send this all to odehelp.

Thanks...		-josh

--------
From: Rahul Kher USG <rahul>
Received: by peacock.zk3.dec.com; (5.65v3.2/1.1.8.2/14Dec95-0359PM)
	id AA04249; Fri, 22 Mar 1996 16:43:04 -0500
Date: Fri, 22 Mar 1996 16:43:04 -0500
Message-Id: <9603222143.AA04249@peacock.zk3.dec.com>
To: odehelp
Subject: submit difficulties
Cc: dc

Hello,

	I was doing a bsubmit into the ptqa tree and got the following
difficulties shown in the messages below -

$ bsubmit mmap_syscalls_exer.c

Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes]



$ bsubmit mmap_syscalls_exer.c

Outdate files if successful submission? [Y]es, [N]o, [Q]uery later]: [Yes]

*** No user interaction will be required during the merge step. ***


*** VALIDATION FAILURE ***

./test/smp/exer/fs/mmap_syscalls_exer.c -- not in set.

Consult the bsubmit reference page for suggested corrective actions.

Please take appropriate steps and run bsubmit again.
- No work has been done for this submission.
- No files have been changed in any way.
- The files in this submission are not held.
- The use of the -resub option is not required and will not be recognized.

$ pwd

$ cd src
$ ls
Makeconf  test
$ ls -la
total 28
drwxr-xr-x   3 rahul    staff       8192 Mar 22 16:31 .
drwxr-xr-x   8 rahul    staff       8192 Mar 22 16:22 ..
-rw-r--r--   1 rahul    staff         50 Mar 22 16:23 .BCSconfig
-rw-r--r--   1 rahul    staff        195 Mar 22 16:22 .BCSlock
-rw-r--r--   1 rahul    staff        122 Mar 22 16:30 .BCSlog-Rahul_Kher_ptqa
-rw-r--r--   1 rahul    staff         40 Mar 22 16:30 .BCSset-Rahul_Kher_ptqa
lrwxr-xr-x   1 rahul    staff         20 Mar 22 15:40 Makeconf -> ../link/src/Makeconf
drwxr-xr-x   3 rahul    staff       8192 Mar 22 16:22 test
$ more .BCSset-Rahul_Kher_ptqa
./test/smp/exer/fs/mmap_syscalls_exer.c
.BCSset-Rahul_Kher_ptqa: END


		Just wondering what I was doing wrong.


			Rahul.