| Date Of Receipt: 11-AUG-1995 11:27:19.24
From: SMURF::FLUME::jmf "Joshua M. Friedman OSF/UNIX SDE 11-Aug-1995 1126"
To: kcs@unx.dec.com (Ken Settle)
CC: odehelp@zk3.dec.com
Subj: Re: Problems with bsubmit from wasted (fwd)
Ken, this could be a problem I've seen which can stem from having
more than one set or sandbox with the same name; once the file's
bco'd in one set, the 2nd one of the same name won't create the
required src/.BCSconfig entry which tracks file history. Check
the files .BCSset-* and .BCSconfig in your sandbox to confirm that
all files in your submit are listed; if they are not, some very
careful reconstructive surgery needs to be done - though you could
cut & paste from the 1st sandbox's .BCSconfig file - if you do this,
be sure to preserve the file format exactly:
./path/name,v<tab>version#
all sorted, no blank lines.
Note that the ptx11.nightly being a little out of date would have no
effect on your submit; anyway, the problem was fixed today (a BIND problem),
so perhaps the best plan is to do the submit from unx and wipe out
the wasted environment.
-josh
-------
> Forwarded message:
> >From kcs Fri Aug 11 09:49:05 1995
> Delivery-Date: Fri, 11 Aug 95 09:49:08 -0400
> Date: Fri, 11 Aug 1995 09:49:05 -0400
> From: KEN SETTLE USG <kcs>
> Message-Id: <9508111349.AA21054@wasted.zk3.dec.com>
> To: vandyck@zk3.dec.com
> Subject: Problems with bsubmit from wasted
>
>
> Grant,
>
> I had to update some files in the ptx11 tree yesterday and
> since we had (for some unknown reason) stopped sup'ing the
> ptx11.nightly tree I had to do my work on a ZK machine.
>
> I created a sandbox, did the usual bco, bci, srequest, etc. all on
> wasted. Now I'm trying to submit from wasted and all I get
> is the following:
>
>
> kcs@wasted> bsubmit -all
>
> Enter the defect number this submission applies to: ptx11-432-kcs
>
> Please take appropriate steps and run bsubmit again.
> - No work has been done for this submission.
> - No files have been changed in any way.
> - The files in this submission are not held.
> - The use of the -resub option is not required and will not be recognized.
>
>
> My sandbox is in /share/flume/usr/staff1/kcs/sb/ptx11/src on flume.
>
> Thanks,
> Ken
>
>
>
> --
> Grant Van Dyck enet: vandyck@zk3.dec.com
> Release Engineering
>
|