Conference vaxuum::document_ft

382.0. "Problem w/ <SECTION> & <CONTENTS_FILE>" by CAADC::GREGORY (Don Gregory @ACI) Fri May 15 1987 22:34

	Use of the <SECTION> tag appears to generate an interesting
        error in the table of contents generation process...        
        
	This is the GNC file:
        
<CONTENTS_FILE>
<section>(Test title)
<p>
Text

	This is the (batch) command:
        
$ document test report ln03/noprint/contents
                
                
        The log file follows:
        

        
$!  CAADC --  SYSTEM-WIDE LOGIN COMMAND FILE
$!
$ set noverify
%DOC-I-IDENT, VAX DOCUMENT T1.0-008
[ T a g   T r a n s l a t i o n ]...
%TAG-I-TAG_IDENT, T1.0-002
%TAG-I-DEFSLOADD, End of Loading of Tag Definitions
%TAG-I-ENDPASS_1, End of first pass over the input
%TAG-I-CPU_USAGE, Pass 1: 3.0  Pass 2: 0.4  Total: 3.4 seconds
[ T e x t   F o r m a t t i n g ]...
%TEX-I-IDENT, T1.0-005
%TEX-I-PAGESOUT, 2 pages written.
-TEX-I-OUTFILENAME, 'cat$root:[gregory]TEST.DVI_LN03'
[ C o n t e n t s   G e n e r a t i o n ]...
[ T e x t   F o r m a t t i n g   C o n t e n t s ]...
%TEX-I-IDENT, T1.0-005
%TEX-W-UNDEFINEDCS, Undefined control sequence
%TEX-I-SHOWCONTEXT, '\hbox to \tocpagenumboxed '
%TEX-I-SHOWCONTEXT, '                                     {\hfil 1}'
%TEX-I-SHOWCONTEXT, '#1->\hbox to\z@ {#1'
%TEX-I-SHOWCONTEXT, '                         \hss }'
%TEX-I-SHOWCONTEXT, '...ocpagenumboxed {\hfil #4}}'
%TEX-I-SHOWCONTEXT, '                                          \advance \rightskip by \toc...'
%TEX-I-LINE, Error occurred on or around line number: 3
%TEX-I-SHOWCONTEXT, '\toctexentry {16}{}{Test title}{1}'
%TEX-I-SHOWCONTEXT, '                                  '
%TEX-I-FILENAME, 'test_contents'
-TEX-I-ONPAGE, on page [iii]
%TEX-W-NONUMBER, Missing number, using zero
%TEX-I-SHOWCONTEXT, '                   {'
%TEX-I-SHOWCONTEXT, '\hbox to \tocpagenumboxed {'
%TEX-I-SHOWCONTEXT, '                                      \hfil 1}'
%TEX-I-SHOWCONTEXT, '#1->\hbox to\z@ {#1'
%TEX-I-SHOWCONTEXT, '                         \hss }'
%TEX-I-SHOWCONTEXT, '...ocpagenumboxed {\hfil #4}}'
%TEX-I-SHOWCONTEXT, '                                          \advance \rightskip by \toc...'
%TEX-I-LINE, Error occurred on or around line number: 3
%TEX-I-SHOWCONTEXT, '\toctexentry {16}{}{Test title}{1}'
%TEX-I-SHOWCONTEXT, '                                  '
%TEX-I-FILENAME, 'test_contents'
-TEX-I-ONPAGE, on page [iii]
%TEX-W-BADUNIT, Bad unit of measure, replaced by 'pt'
-TEX-W-UNKNOWNUNIT, Dimension unit must be: em,ex,in,pt,pc,cm,mm,dd,cc,bp,sp
%TEX-I-SHOWCONTEXT, '                   {'
%TEX-I-SHOWCONTEXT, '\hbox to \tocpagenumboxed {'
%TEX-I-SHOWCONTEXT, '                                      \hfil 1}'
%TEX-I-SHOWCONTEXT, '#1->\hbox to\z@ {#1'
%TEX-I-SHOWCONTEXT, '                         \hss }'
%TEX-I-SHOWCONTEXT, '...ocpagenumboxed {\hfil #4}}'
%TEX-I-SHOWCONTEXT, '                                          \advance \rightskip by \toc...'
%TEX-I-LINE, Error occurred on or around line number: 3
%TEX-I-SHOWCONTEXT, '\toctexentry {16}{}{Test title}{1}'
%TEX-I-SHOWCONTEXT, '                                  '
%TEX-I-FILENAME, 'test_contents'
-TEX-I-ONPAGE, on page [iii]
%TEX-I-LINETOOLONG, Line too long by 5.19647 points
-TEX-I-ONPAGE, on page [iii]
%TEX-I-PAGESOUT, 1 page written.
-TEX-I-OUTFILENAME, 'cat$root:[gregory]TEST_CONTENTS.DVI_LN03'
%DOC-E-ERROR_FORMATTER, Errors found by the Text Formatter.
  GREGORY      job terminated at 15-MAY-1987 17:23:48.02

  Accounting information:
  Buffered I/O count:          204      Peak working set size:  3942
  Direct I/O count:            480      Peak page file size:    8733
  Page faults:                4179      Mounted volumes:           0
  Charged CPU time:     0 00:00:21.00   Elapsed time:     0 00:00:34.62
        

    
    Yes, that was a typo that sneaked past in BL8. I put a corrected
    version of TEX$REPORT.DESIGN;1 in KITS_:[DOCUMENT]. This file
    should replace the current version in DOC$STANDARD_FORMATS (BL8).
     
    -patti