[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference kernel::csguk_systems

Title:CSGUK_SYSTEMS
Notice:No restrictions on keyword creation
Moderator:KERNEL::ADAMS
Created:Wed Mar 01 1989
Last Modified:Thu Nov 28 1996
Last Successful Update:Fri Jun 06 1997
Number of topics:242
Total number of notes:1855

187.0. "Recursive Bugchecks on DEC1000 & DEC7000 systems" by KERNEL::PETTET (Norm Pettet CSC Basingstoke) Wed Jul 06 1994 20:49

    Chaps,
    
    	With the from panel switch in SECURE and you shutdown a DEC10000 or
    DEC7000 - you will get the following printed on the console.:-
    
    
        SYSTEM SHUTDOWN COMPLETE

CPU:0 Halt Code =  5
HALT instruction executed
PC = 80055d74
CPU:00 Restarting...

**** Recursive bugcheck, code = 00000164, exception frame:
        R2 = FFFFFFFF 8292DFE8
        R3 = FFFFFFFF 80910000
        R4 = 00000000 00000280
        R5 = FFFFFFFF 8292E608
        R6 = FFFFFFFF 8291A3D0
        R7 = FFFFFFFF 80910000
        PC = FFFFFFFF 8006412C
        PS = 38000000 00001F00
 **** Restoring to data from original bugcheck, code = 00000474


        SYSTEM SHUTDOWN COMPLETE


 CPU:0 Halt Code =  5
 HALT instruction executed
 PC = 80055d74
 Initializing...

 F   E   D   C   B   A   9   8   7   6   5   4   3   2   1   0   NODE #
                             A   M   .   .   .   .   .   M   P   TYP
                             o   +   .   .   .   .   .   +   +   ST1
                             .   .   .   .   .   .   .   .   B   BPD
                             o   +   .   .   .   .   .   +   +   ST2
                             .   .   .   .   .   .   .   .   B   BPD
                             +   +   .   .   .   .   .   +   +   ST3
                             .   .   .   .   .   .   .   .   B   BPD

     +   +   +   .   +   .   +   .   +   +   +   .   .   .       C0 XMI +
 .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   C1
 .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   C2
 .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   C3

                             .  A1   .   .   .   .   .  A0   .   ILV
                             . 128   .   .   .   .   . 128   .   256MB
Firmware Rev = V2.5-3282[A53]      SROM Rev = V2.2-0      SYS SN = GAQV6
 >>>
 Booting...
 Connecting to boot device dkc100.1.0.14.0
 Created boot device: dkc100.1.0.14.0
 block 0 of dkc100.1.0.14.0 is  a valid boot block
 reading 871 blocks from dkc100.1.0.14.0
 bootstrap code read in
 base = 200000, start = 0
 initializing HWRPB at 2000
 initializing page table at 1f4000
 initializing machine state
 jumping to bootstrap at 200000

OpenVMS AXP (TM) Operating System, Version V1.5


    
    
    	I think this is expected behaviour but I'm unable, at present, to
    access LASER notesfile. Perhaps someone can comment?
    
    
    Norm
T.RTitleUserPersonal
Name
DateLines
187.1Known problemKERNEL::PETTETNorm Pettet CSC BasingstokeThu Jul 07 1994 14:0418
                 <<< PROXY::WRKD:[NOTES$LIBRARY]LASER.NOTE;1 >>>
                                   -< laser >-
================================================================================
Note 636.1                 SHUTDOWN Recursive bugcheck                    1 of 1
TKTVFS::YAMAGUCHI_KA "Kazumi Yamaguchi,TSSG/CSC/Jap" 10 lines   6-JUL-1994 22:05
                  -< "Recursive bugcheck" is known problem. >-
--------------------------------------------------------------------------------
	Hi,

	This is known problem. Same problem discussed on note 381. 
	This problem was entered into PCIS and VMS QAR. VMS QAR was 
	transferred from V6(#442) to EVMS-EPSILON(#1853) and then 
	EVMS-ZETA(#561) data base. PCIS QAR(#6492) are waiting status 
	since last November. I'm not sure this problem fixed in OpenVMS
	AXP V6.1.

	Kazumi