[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference kernel::csguk_systems

Title:	CSGUK_SYSTEMS
Notice:	No restrictions on keyword creation
Moderator:	KERNEL::ADAMS

Created:	Wed Mar 01 1989
Last Modified:	Thu Nov 28 1996
Last Successful Update:	Fri Jun 06 1997
Number of topics:	242
Total number of notes:	1855

50.0. "MODEM TOPICS" by KERNEL::MOUNTFORD () Thu Jul 13 1989 19:43

                            NEW RACAL MODEM SET UPS
                            _______________________

	The good old faithfull Racal MPS1222 modem is being replaced by a new
Racal VI1222PA modem. The new modem is now available from logistics, and is
likely to be seen in the field very shortly. The following message is being
sent to the Field so that the Installing Engineer can set it up as required
by RDC.

	I have one Modem that you are welcome to inspect at any time. I would
like everyone to see this Modem ASAP, so that when the Field ring in, you will
know what they are on about.


Cheers Pete
******************************************************************************
******************************************************************************


	The Racal MPS1222 modem that has been installed by DEC on customers
sites for Remote Access by the RDC is being replaced by a Racal VI1222PA modem.
	This document should enable the person installing the modem to set
it up so that it is suitable for use as an RD dial in modem.

	1) The Modem connects to the telephone line by means of a B.T. Newplan
plug. A spare socket is incorpoated into the plug to take the telephone
connection. 

	2) Power up the modem. The LCD front panel will display the following
messages.

	POWER ON, WAIT then IDLE.

	3) Now operate the following key sequence, which will set Option 2 to 3
Option 3 to 2, and Option 19 to 3, then call the RDC for a link check.


	Key to operate.       Display.
        ---------------       --------

	      0               OPTION:
	      2                 2
	    Enter             OP 02*1
	      3               OP 02*3
	    Enter             OPTION:
	      3                 3
            Enter             OP 03*1
              2               OP 03*2
            Enter             OPTION:
	     19	                19
            Enter             OP 19*1
	      3               OP 19*3
	    Enter             OPTION:
            Enter             RESET
                              IDLE

You must then depress the "answer" button twice within 1 second to display
auto..............

T.R	Title	User	Date	Lines
50.1	SCORPIO RDC CONNECTIONS	KERNEL::MOUNTFORD	`Thu Jul 13 1989 19:44`	22
	CORRECT CABLING FOR SCORPIO SYSTEMS. ------------------------------------ It has come to our attention that on several 8200/8300 sites that the REMOTE SERVICES CONSOLE is being installed incorrectly by field service. The symptons are that we connect ,with protocol, without problem but get no response in "Trans" mode unless local copy is enabled. The problem is the cable to the console terminal and CPU console terminal port are fitted to the wrong connectors. Console terminal MUST go to RSC connector A1 use BC22F cable CPU cons port MUST go to RSC connector A2 use BC22D cable Read the RSC Field Service Manual Merry Christmas, Steve Wibrew
50.2	MODEM PART NUMBERS.	KERNEL::MOUNTFORD	`Thu Jul 13 1989 19:47`	19
	USEFUL PART NUMBERS. ------------------- Although the new VI1222-PA modem is electronically compatible with the MPS1222, there are cabling differences which could cause problems when trying to replace a faulty MPS1222 with a new type. The workaround to this will be a small stock of MPS1222 held at Winnersh, so will have to be ordered specially. In case you've always wondered, the part numbers for both modems are: MPS1222 +L-13000 VI1222-PA +L-10561 Information courtesy of Duncan Surridge, F.S. Marketing, so don't blame me! Regards, Mike
50.3	This can help..	KERNEL::EDMUNDS	`Sat Jul 15 1989 23:09`	16
	The Racal Vadic(new type) can be "factory reset" by setting option 1 to 1. ie; O 1 <enter> 1 <enter> <enter> ...then set our required options as in first note. This will get the modem back to a known state if someone has been playing,in fact I usually get the engineer/customer to do this if we are experiencing connection problems.
50.4		KERNEL::MOUNTFORD	`Mon Feb 12 1990 06:27`	61
	RACAL-VADIC VI1222PA MODEM The advise in a memo sent out by Pete Alvis on this modem contained the following: 1. The modem connects to the telephone line by means of a B.T. Newplan plug. A spare socket is incorporated into the plug to take the telephone. 2. Power up the modem. The LCD front panel will display the following messages. POWER ON, WAIT then IDLE 3. Now operate the following key sequence, which will set Option 2 to 3, Option 3 to 2, and Option 19 to 3, then call the RDC for a link check. Key to operate. Display. --------------- -------- 0 OPTION: 2 2 Enter OP 021 3 OP 023 Enter OPTION: 3 3 Enter OP 031 2 OP 032 Enter OPTION: 19 19 Enter OP 191 3 OP 193 Enter OPTION: Enter RESET IDLE Any problems please call RDC. ******************************************************************************** I had a tele support call for an engineer that got a Modem Error printed on the consol when he turned the key on MDS01 to REMOTE. He had swapped the MDS01, MODEM and all cables. The engineer had done RD installations before using MDS01 and the VI1222PA modem. The fix appears to be the following. at OPTION: press 1 and then ENTER, you will get a display of: OP 011 (Original Values Set) or OP 012 (Original Values Changed) Pressing 1 and then ENTER sets the original settings. This appeared to fix his problem. I suggest reseting the original settings and then carrying out the set ups listed above in Petes original memo if you encounter this problem. Regards Richard Hoblin.