[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference aosg::lsm

Title:LSM
Moderator:SMURF::SHIDERLY
Created:Mon Jan 17 1994
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:803
Total number of notes:2852

795.0. "anyone seen this yet?" by SUBSYS::MSOUCY (MentalmETALMike) Fri May 16 1997 14:37

    
    Hi, I didn't see a note pertaining to my question I have here with LSM
    and AdvFS filesets using Concatenating disks.
    
    I am running an ASE cluster (2 node homogenous, AS2100's) on KZPBA-DB
    modules (dual channel UltraSCSI F20 Differential) and I am doing some
    testing for driver qualification/board qualification under ASE and I
    was curious as to why when checking the status of the NFS service I
    have configured (and while configuring it) that it's showing the
    smaller of the two disks first in order, ie my rack is BA356 with
    RZ1CB-CA 4Gb in slot 0, then 3 RZ1BB-CA 2Gb, then the remaining 4Gb
    RZ1CB-CA in slots 4 and 5. When showing status or while configuring the
    service the drives were listed as rz11c, rz8c. Is this because it is a
    concatentated volume with 2 different size disks? I am curious as when
    I pull the 4Gb drive after mounting the service and copying a file to
    that mount point the process completes without crashing the node the
    service is running on, but if I reverse this process and pull the 2Gb
    disk (rz11c) the node providing the service crashes with an AdvFS
    panic. There is someone looking at this in ZK for a possible driver
    issue.
    
    I'd appreciate an email on this also so I can forward it to the person
    who is supporting me in ZK can see this also. Or I'll extract it and
    mail it to him.
    
    Thanks in advance.
    
    Mike
    
T.RTitleUserPersonal
Name
DateLines