[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference wrksys::mikasa

Title:AlphaServer 1000 (aka Mikasa)
Moderator:WRKSYS::HESCHG
Created:Mon Nov 14 1994
Last Modified:Thu Jun 05 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:917
Total number of notes:3293

843.0. "AS1000A 5/300 Beep code 1-3-3" by QBUS::E_BURKHALTER () Wed Feb 19 1997 00:09

    
    A customer is upgrading a AS1000A from a 4/266 to a 5/300.
    The system module is a 54-23499-01.
    They installed the firmware off the AK-QYTCB-CA =
    AlphaServer 1000A 5/xxx firmware update CD.
    
    On POST with the 5/300 cpu module installed, they
    get a beep code of 1-3-3.  The original memory
    was PB7MA-AC and the add-on memory is PB7MA-CE.
    
    In any combination of original memory or new memory
    ECC simms or no ECC simms, they still get the same
    beep code.  They tried another system module, but
    no change.
    
    Does the AlphaServer 1000A 5/300 support both the
    54-23499-01 an 54-23449-02 system modules?
    
    They have not tried another 5/300 module.
    
    Any ideas?
    
    Ed Burkhalter
    CSC Atlanta
T.RTitleUserPersonal
Name
DateLines
843.1AFW1::RENDAMike Renda dtn: 223-4663Wed Feb 19 1997 13:198
Beep codes are described in the AlphaServer 1000A Service Guide (order number
EK-ALPSV-SV) - Section 2.1. A beep code of 1-3-3 indicates the SROM could not
find any good memory. Make sure the CPU daughter card and memory cards are
properly seated into the main logic board.

Main logic boards 54-23499-01 and -02 supports the 5/300 CPU daughter card. The
difference between the main logic boards is that the -02 does not have a
graphics chip.