[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

3836.0. "notification stops displaying alarms" by COL01::LUNT () Wed Sep 30 1992 20:11

    Hello all,
    
    	Recently due to a Router problem we have been getting
    lots of DECmcc alarms. After a while DECmcc notification,
    however, stops displaying them. For example over the
    weekend I got over 300 mails, and only 59 alarms in my
    notification window. No Filtering is set, the notification
    limit is 500. After exiting and reentering DECmcc I started
    receiving my alarms again. This problem has been occcuring
    rather often recently. Can anyone give me any tips on
    where to start looking for my problem? Has anyone else
    experienced this?
    
    User and System Parameters have all been checked against
    the release note recommendations.
    
    
    Thanks for any info or insight,
    
    Julie Ann

T.R	Title	User	Personal Name	Date	Lines
3836.1	details	MCC1::DITMARS	Pete	`Thu Oct 01 1992 16:07`	15
	What OS? What version of the software? Any error messages at all, either on the DECterm that IMPM was started from or as popup message boxes? Bring up the Notify Requests window and see what the status of the requests are. Double-click on a request to get a detail box which, if there was an error, will have a "Show Error" button next to the status field. Any correlation between pausing your workstation session and notifications stopping? Are you running Motif V1.1.3?
3836.2	More details	COLSER::WELZEL	Uwe Welzel, NaC, Cologne	`Tue Oct 06 1992 10:25`	56
	-< more details >- >>What OS? What version of the software? DECmcc V1.2 SSB on VMS 5.5 (VAX 4000/500) >>Any error messages at all, either on the DECterm >>that IMPM was started from or as popup message boxes? Once I got the message "one or more events has been lost for domain DM.WAN" I saw this one morning after resuming the pause session. On this morning all alarms were not registered in the Notification window. This (dm.wan), by the way, is not the domain where the node-alarm-domain (.eu.by.byl.mpr_36) is that was receiving every 15 minutes an alarm. But this node is also a member of the domain (dm.wan) and has it's events sinked to my node. (this doesn't work so well either, but that is another topic) This domain ( dm.wan ) contains all of our routers for recording purposes and has notify request on node4 * all events. >>Bring up the Notify Requests window and see what >>the status of the requests are. Double-click on a >>request to get a detail box which, if there was >>an error, will have a "Show Error" button next to the >>status field. I haven't seen this "Show error" button at all. >>Any correlation between pausing your workstation session >>and notifications stopping? Perhaps, The last couple of days after resuming my pause session MCC was crashed with the following: day 1: %CMA-F-EXCCOP, exception raised; VMS condition code follows -system-f-accvio, access violation, reason mask=00, virtual address=..... day 2: %CMA-F-EXCCOP, exception raised; VMS condition code follows -system-f-accvio, access violation, reason mask=01, virtual address=..... >Are you running Motif V1.1.3? No, Motif V1.0 Julie Ann