[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:DECmcc user notes file. Does not replace IPMT.
Notice:Use IPMT for problems. Newsletter location in note 6187
Moderator:TAEC::BEROUD
Created:Mon Aug 21 1989
Last Modified:Wed Jun 04 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6497
Total number of notes:27359

3770.0. "Kernel could not be initialized (KERNELINITF)" by BRSTR1::MERTENS (yves) Fri Sep 18 1992 14:53

    
    
    
    By the installation of BMS 1.2 on Ultrix V4.2A (RISC 5000-100)
     I have the following problem:
    
     Kernel could not be initialized (KERNELINITF)
    
    
    I have installed all required patches ,I have 32MB of memory and
    my system parameters are setup like mentioned in the release notes.
      
    
    Could somebody help.
    
    
     Yves 
T.RTitleUserPersonal
Name
DateLines
3770.1TOOK::SWISTJim Swist LKG2-2/T2 DTN 226-7102Fri Sep 18 1992 20:194
    Need more context.  When exactly does this happen and what are the
    messages just before this one.  Also please post the output of the
    following commands    ipcs, /etc/pstat -T
    
3770.2ULTRIX INSTALL AND DECMCCBRSTR1::MERTENSyvesMon Sep 21 1992 12:0039
    Jim,
    
    
    Here follows the information you asked for:
    
      - It happens by the installation of DECMCC-BMS .The error message
    happens when the installation procedures starts the creation of the
    dispatch tables (Now creating dispatch tables).
    
        the output of /etc/pstat -T
        ---------------------------
  98/ 609	files
 116/ 444	gnodes
  24/ 288	processes
  16/  60/  76	active/reclaimable/total texts
 106/1249	00k swap
         The output of ipcs
         --------------------
IPC status from /dev/kmem as of Mon Sep 21 11:23:42 1992
Message Queues:
T     ID     KEY        MODE       OWNER    GROUP
*** No message queues are currently defined ***

Shared Memory
T     ID     KEY        MODE       OWNER    GROUP
m      0          0 D-rw-------     root   system
m      1          0 D-rw-------     root   system
m      2 1291848138 --rw-rw-rw-     root   daemon

Semaphores
T     ID     KEY        MODE       OWNER    GROUP
s      0   67111368 --ra-ra-ra-     root   daemon
s      1   50334153 --ra-ra-ra-     root   daemon

    
    Hope this will help you
    
    
    Yves
3770.3TOOK::SWISTJim Swist LKG2-2/T2 DTN 226-7102Mon Sep 21 1992 12:305
    setenv MCC_LOG 0x4
    setenv MCC_IM_LOG 0x10000
    
    and try again.  This might give me a better idea where it's failing.
    
3770.4ultrix full installation logBIS1::DOBBENIMon Sep 21 1992 13:48432
    Jim,
    
    Here follows the complete installation file:
    
    
Script started on Mon Sep 21 15:30:41 1992
# setld -l /usr/tmp

*** Enter Subset Selections ***

The subsets listed below are optional:
 1) DECmcc BMS Release Notes             2) DECmcc Manual Pages                 
 3) DECmcc Basic Management System       4) DECmcc DECnet/OSI AM                

 5) All of the Above
 6) None of the Above
 7) Exit without installing subsets

Enter your choice(s): 3

You are installing the following subsets:
   DECmcc Basic Management System       

Is this correct? (y/n): y
 
 Starting installation of DECmcc Basic Management System VERSION 120
 

    Copyright (c) Digital Equipment Corporation, 1992.
    All Rights Reserved.  Unpublished rights reserved
    under the copyright laws of the United States.
 
    The software contained on this media is proprietary
    to and embodies the confidential technology of
    Digital Equipment Corporation.  Possession, use,
    duplication or dissemination of the software and
    media is authorized only pursuant to a valid written
    license from Digital Equipment Corporation.
   
    RESTRICTED RIGHTS LEGEND   Use, duplication, or
    disclosure by the U.S. Government is subject to 
    restrictions as set forth in Subparagraph (c)(1)(ii)
    of DFARS 252.227-7013, or in FAR 52.227-19, as
    applicable.
 

    This system is missing one or more of the following subsets,
    which are required to run the DECmcc reports.

        FERIBASETLS630          INGRES Base Tools: QBF, RBF, Wview
        FERICOMMON630           Common Files for INGRES Tools
        FERIVIGRAPH630          INGRES VIGRAPH

    The installation will continue, but you will not be able to use
    the DECmcc example reports until these subsets are installed.


DECmcc Basic Management System (MCRBMS120)
   Copying from /usr/tmp (disk)
        Working....Mon Sep 21 15:32:31 MET DST 1992
        Working....Mon Sep 21 15:34:33 MET DST 1992
        Working....Mon Sep 21 15:36:36 MET DST 1992
   Verifying
        Working....Mon Sep 21 15:38:12 MET DST 1992

Time Format Configuration...

The following questions set the default formats for time/date
values used as input/output by the DECmcc PMs.  These may be 
changed at any later time on a per-user basis.

Time input mode selection:

  1 - ISO Character Time UTC or Local with explicit TDF
  2 - ISO Character Time Local

Enter choice [2]:  


Time output mode selection:

  1 - ISO Character Time UTC
  2 - ISO Character Time Local
  3 - Unix(TM) format UTC
  4 - Unix(TM) format local time

Enter choice [2]:  

Enter significant output positions on absolute time display.
Output times will be truncated on the right after this many
characters.

Enter truncation position [23]:  
                   
DECmcc requires the use of a namespace service for the storage and 
retrieval of network entity information.  You can select a local 
namespace or a distributed namespace (DNS).  Select the local namespace, 
unless you have multiple DECmcc systems that need to share namespace 
information, or you are using a DECnet/OSI distributed namespace.
If either of those conditions apply, select the DNS; otherwise, 
select the local namespace.  You may choose only one namespace.

If you select the DNS, you will need to plan and configure the namespace 
properly, before registering any entities in it.  See the DNS chapter 
in the DECmcc Planning and Installation for ULTRIX manual.  
 
If you intend to use the DECmcc Autoconfiguration applications with
the local namespace, please see the Autoconfiguration and Autotopology
Use manual on how to plan your entity name structure.


 * Use DNS for DECmcc? [YES]  n
   Using a local name space for DECmcc. 

 * Is this correct? [YES] 

Creating the DECmcc login files...



The existing DECmcc login file, /usr/mcc/mcc_system/mcc_login.csh, has
been renamed to /usr/mcc/mcc_system/mcc_login.csh.old.  If you have 
modified this file then you may wish to review the new 
DECmcc login file, /usr/mcc/mcc_system/mcc_login.csh, and make any 
needed changes.



The existing DECmcc login file, /usr/mcc/mcc_system/mcc_login.sh, has
been renamed to /usr/mcc/mcc_system/mcc_login.sh.old.  If you have 
modified this file then you may wish to review the new 
DECmcc login file, /usr/mcc/mcc_system/mcc_login.sh, and make any 
needed changes.



 [ Press the RETURN key to continue ]:

The following two shell scripts have been created in the directory
/usr/mcc/mcc_system.  

             mcc_login.sh  
             mcc_login.csh 

Each DECmcc user on this system (including root) should invoke one
of these scripts automatically when starting a new shell.

C Shell users should place the following command in their .cshrc file.

    source /usr/mcc/mcc_system/mcc_login.csh

Bourne Shell users should place the following command in their 
.profile file.

    . /usr/mcc/mcc_system/mcc_login.sh

If a user wishes to redefine or add environmental variable definitions
for Management Module development or other customization purposes, a
private version of the mcc_login file may be maintained and invoked
on a per-user basis.

 [ Press the RETURN key to continue ]:

Now creating dispatch tables...

Removing old dispatch table.
Please re-enroll any local management modules after installation.
%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done
%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


Dispatch Table initialization done

KERNEL_AM enroll done
 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_alarms_fm...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_circuit_am...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000

 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_collection_am...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_dna4_am...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_domain_fm...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000

 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_enet_am...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_exporter_fm...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_historian_fm...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_notification_fm...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000

 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_pa_fm...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000

 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_registration_fm...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000

 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_sample_am...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
 %MCC-E-KERNINITF, Kernel could not be initialized
   enrolling mcc_tcpip_am...%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000


MCC logicals translation done

Minor structure initialization done

Create Dispatch Table locks done

Dispatch Table initialization done

KERNEL_AM enroll done
%MCC-I-LOG, MCC_LOG = 4

%MCC-I-LOG, MCC_IM_LOG = 10000

 %MCC-E-KERNINITF, Kernel could not be initialized
 Done.

There will be no more pre-installation questions. 
DECmcc Basic Management System VERSION 120 for ULTRIX Installation complete



The next question confirms that you are ready to configure
your system to run DECmcc Basic Management System for ULTRIX
V1.2 at this time.

If you answer 'no' to this question, you will be told how
you can configure DECmcc Basic Management System for ULTRIX V1.2
at a later time.


Do you want to configure your system to run DECmcc BMS [y/n]?n
You chose not to configure your system to run DECmcc BMS 
at this time.  If you decide to configure DECmcc BMS 
later, issue the command:

     setld -c MCRBMS120 install


# ^D
script done on Mon Sep 21 15:41:02 1992
    
3770.5TOOK::SWISTJim Swist LKG2-2/T2 DTN 226-7102Mon Sep 21 1992 14:3618
    Hmm. This is a tough one (and not helped by some 100-year old code
    which simply returns MCC_S_KERNININTF in the face of any one of a
    hundred possible errors).
    
    Your trace shows the code that is failure has something to do with
    creating the mcc_dispatch_table.dat file, or, is the first use
    of the mcc lock manager, which involves creating and locking a
    bunch of Ultrix semapahores. 
    
    These are areas to check out.  Did you make the changes to /sys/h/sem.h
    and rebuild the Ultrix kernel?   Can you create mcc_dispatch_table.dat
    in /usr/mcc/mcc_system out size the context of MCC?  (For example
    try a cat > /usr/mcc/mcc_system/mcc_dispatch_table.dat) and see what
    happens (do an ls -l afterward to see if you created it).
    
    Also, could you post what other software has been installed on this
    system ?
    
3770.6DECMCC AND ULTRIXBRSTR1::MERTENSyvesMon Sep 21 1992 15:31207
    Jim,
    
    The sem.h file was adapted and we did a rebuild of the kernel.The cat
    command just like you mentioned works fine.
    Here follows the list of the software that we installed.
    On one machine we use DECNET/OSI and the other DECNET,but the problem
    is in both cases the same.
    
    DECNET/OSI SYSTEM
    -----------------

Subset		Status		Description
======		======		===========
COMU4BACKEND205 installed       V2.05+ Compiler Back End.   Refer to the 
        Release Notes for more information concerning                
        this subset.                
DNPBASE420                      DECnet-ULTRIX Base Software
DNPBASE510      installed       DECnet/OSI Base Components
DNPINETGW420                    DECnet-Internet Gateway
DNPINETGW510                    DECnet-Internet Gateway
DNPMAN420                       DECnet On-line Manual Pages
DNPMAN510                       DECnet/OSI On-line Documentation
DNPMOP510                       DECnet/OSI MOP Utilities
DNPNETMAN510    installed       DECnet/OSI Network Management
DNPUNS420                       DECnet-ULTRIX Unsupported Software
DNPUNS510                       DECnet/OSI Unsupported Software
MCRBMS120       installed       DECmcc Basic Management System
MCRBMSREL120                    DECmcc BMS Release Notes
MCRDNA5120                      DECmcc DECnet/OSI AM
MCRMAN120                       DECmcc Manual Pages
NSRBASE201      installed       DECdns Base Components
NSRMAN201                       DECdns On-line Documentation
NSRSERV201      installed       DECdns Server Components
THRBASE111      installed       DECthreads Multithreading Services for Ultrix (RISC) THRBASE111
TSRBASE110      installed       DECdts Base Components
TSRMAN110                       DECdts On-line Documentation
TSRPRVDR110                     DECdts Time Provider Examples
UDTACCT420                      Accounting Software
UDTACCT425                      Accounting Software UPGRADE
UDTAFM420       installed       Adobe Font Metric Files
UDTBASE420      installed       Base System
UDTBASE425      installed       Base System UPGRADE
UDTBIN420       installed       Kernel Configuration Files
UDTBIN425       installed       Kernel Config Files UPGRADE
UDTCDABASE420                   CDA Base System
UDTCDAPGMR420                   CDA Software Dev Libraries
UDTCOMM420      installed       Communications Utilities
UDTCOMM425      installed       Communications Util. UPGRADE
UDTDCMT420      installed       Doc. Preparation for Ref. Pages
UDTDCMTEXT420                   Doc. Preparation Extensions
UDTEXAMPLES420                  Programming Examples
UDTEXAMPLES425                  Programming Examples UPGRADE
UDTEXER420                      System Exerciser Package
UDTEXER425                      Sys Exerciser Package UPGRADE
UDTINET420      installed       TCP/IP Networking Utilities
UDTINET425      installed       TCP/IP Networking Util UPGRADE
UDTINET425001   installed       TCP/IP Networking Util. PATCHES
UDTINTLPGMR420                  Internationalization Dev. Env.
UDTINTLRT420    installed       Internationalization Runtime Env.
UDTKERB420                      Kerberos Network Authentication
UDTMAN420       installed       Ref. Pages for Sys. Admin. & Users
UDTMAN425       installed       Ref Pages Admin/Users UPGRADE
UDTMANPGMR420                   Reference Pages for Programers
UDTMANPGMR425                   Ref Pages for Prog UPGRADE
UDTMH420        installed       RAND Mail Handler
UDTMOP420       installed       Maintenance Operations Protocol
UDTNFS420       installed       Network File System Utilities
UDTNFS425       installed       Network File Sys Util UPGRADE
UDTPGMR420                      Software Development Utilities
UDTPGMR425                      Software Dev. Utilities UPGRADE
UDTPRESTO420                    Prestoserve Utilities
UDTPRINT420                     Printer Support Environment
UDTPRINT425                     Printer Support Env. UPGRADE
UDTRPCDEV420                    RPC Development Environment
UDTRPCRT420     installed       RPC Runtime Environment
UDTRPCRT425     installed       RPC Runtime Environment UPGRADE
UDTSCCS420                      Source Code Control System
UDTSEC420                       Enhanced Security Features
UDTSEC425                       Enhanced Sec. Features UPGRADE
UDTSMSCAMP420                   Sys. Config. Mgmt. Program (SCAMP)
UDTUMAIL420     installed       Extended (Berkeley) Mailer
UDTUUCP420                      Unix-to-Unix Copy Facility
UDWDECW420      installed       Additional DECwindows Applications
UDWFONT15425    installed       X11/DECwindows 100dpi Fonts
UDWFONT420      installed       X11/DECwindows 75dpi Fonts
UDWFONTSTR420                   X11/DECwindows PEX Fonts
UDWMAIL420                      DECwindows Mail Application
UDWMAIL425                      DECwindows Mail Appl. UPGRADE
UDWMAN420                       UWS Runtime Reference Pages
UDWMAN425                       UWS Runtime Reference Pages UPGRADE
UDWMANPGMR420                   UWS Development Reference Pages
UDWSER425       installed       B&W, Color, or PX Server
UDWSYSMGNT420                   System Management Tools
UDWTPV024425                    Wavefront Personal Visualizer
UDWTPVMAN425                    Personal Visualizer Manual Page
UDWWSTSER425                    X11R4 PXG Server
UDWX11420       installed       X11/DECwindows User Environment
UDWX11425       installed       X11/DECwindows User Env. UPGRADE
UDWX11425001    installed       X11/DECwindows User Env. PATCHES
UDWXDEV420                      Worksystem Development Environment
UDWXDEV425                      Worksystem Devmt. Env. UPGRADE
UDWXTXSER425                    Truecolor Server
    
    
     
    DECNET SYSTEM
    -------------

Subset		Status		Description
======		======		===========
COMU4BACKEND205 installed       V2.05+ Compiler Back End.   Refer to the 
        Release Notes for more information concerning                
        this subset.                
DNPBASE420      installed       DECnet-ULTRIX Base Software
DNPINETGW420                    DECnet-Internet Gateway
DNPMAN420       installed       DECnet On-line Manual Pages
DNPUNS420                       DECnet-ULTRIX Unsupported Software
MCRBMS120       installed       DECmcc Basic Management System
MCRBMSREL120    installed       DECmcc BMS Release Notes
MCRDNA5120                      DECmcc DECnet/OSI AM
MCRMAN120       installed       DECmcc Manual Pages
THRBASE111      installed       DECthreads Multithreading Services for Ultrix (RISC) THRBASE111
UDTACCT420                      Accounting Software
UDTACCT421                      Accounting Software UPGRADE
UDTAFM420                       Adobe Font Metric Files
UDTBASE420      installed       Base System
UDTBASE421      installed       Base System UPGRADE
UDTBIN420       installed       Kernel Configuration Files
UDTBIN421       installed       Kernel Config Files UPGRADE
UDTCDABASE420                   CDA Base System
UDTCDAPGMR420                   CDA Software Dev Libraries
UDTCOMM420      installed       Communications Utilities
UDTCOMM421      installed       Communications Util. UPGRADE
UDTDCMT420      installed       Doc. Preparation for Ref. Pages
UDTDCMTEXT420                   Doc. Preparation Extensions
UDTEXAMPLES420                  Programming Examples
UDTEXAMPLES421                  Programming Examples UPGRADE
UDTEXER420                      System Exerciser Package
UDTINET420      installed       TCP/IP Networking Utilities
UDTINET421      installed       TCP/IP Networking Util UPGRADE
UDTINTLPGMR420                  Internationalization Dev. Env.
UDTINTLRT420    installed       Internationalization Runtime Env.
UDTKERB420                      Kerberos Network Authentication
UDTMAN420       installed       Ref. Pages for Sys. Admin. & Users
UDTMAN421       installed       Ref Pages Admin/Users UPGRADE
UDTMANPGMR420                   Reference Pages for Programers
UDTMANPGMR421                   Ref Pages for Prog UPGRADE
UDTMH420                        RAND Mail Handler
UDTMOP420       installed       Maintenance Operations Protocol
UDTNFS420       installed       Network File System Utilities
UDTNFS421       installed       Network File Sys Util UPGRADE
UDTPGMR420                      Software Development Utilities
UDTPGMR421                      Software Dev. Utilities UPGRADE
UDTPRESTO420                    Prestoserve Utilities
UDTPRINT420     installed       Printer Support Environment
UDTPRINT421     installed       Printer Support Env. UPGRADE
UDTRPCDEV420                    RPC Development Environment
UDTRPCRT420                     RPC Runtime Environment
UDTRPCRT421                     RPC Runtime Environment UPGRADE
UDTSCCS420                      Source Code Control System
UDTSEC420                       Enhanced Security Features
UDTSEC421                       Enhanced Sec. Features UPGRADE
UDTSMSCAMP420                   Sys. Config. Mgmt. Program (SCAMP)
UDTUMAIL420     installed       Extended (Berkeley) Mailer
UDTUUCP420      installed       Unix-to-Unix Copy Facility
UDWDECW420      installed       Additional DECwindows Applications
UDWFONT15420                    X11/DECwindows 100dpi Fonts
UDWFONT15421                    X11/DECwndws 100dpi Fnts UPGRADE
UDWFONT420      installed       X11/DECwindows 75dpi Fonts
UDWFONTSTR420                   X11/DECwindows PEX Fonts
UDWMAIL420                      DECwindows Mail Application
UDWMAIL421                      DECwindows Mail Appl. UPGRADE
UDWMAN420                       UWS Runtime Reference Pages
UDWMANPGMR420                   UWS Development Reference Pages
UDWSER420       installed       X11/DECwindows Servers
UDWSER421       installed       X11/DECwindows Servers UPGRADE
UDWSYSMGNT420                   System Management Tools
UDWX11420       installed       X11/DECwindows User Environment
UDWX11421       installed       X11/DECwindows User Env. UPGRADE
UDWXDEV420                      Worksystem Development Environment
UDWXDEV421                      Worksystem Devmt. Env. UPGRADE
UDXBASE420                      Base Extension
UDXBIB420                       Bibliographic Utilities
UDXCOURIER420                   Remote Procedure Call Compiler
UDXDCMT420                      Document Preparation Software
UDXDOC420                       Supplementary Documentation
UDXEDIT420                      GNU Emacs
UDXGAMES420                     Games and Diversions
UDXINET420      installed       TCP/IP Networking Util Extension
UDXLEARN420                     Computer Aided System Tutor
UDXMAN420                       Unsupported On-Line Documentation
UDXNEWS420                      USENET News Interface Software
UDXNOTES420                     Notesfiles Package
UDXRCS420                       Revision Control System
UDXSHELLS420                    Aux. Command Line Interpreters
UDXTERM420                      Additional Terminal Drivers
UDXTOOLS420                     Misc. User-Contributed Utilities
UDXUNEXAMP420                   Unsupported DECwindows Examples
UDXUNFONTS420                   Unsupported MIT Fonts
UDXUNMAN420                     Unsupported X11 Reference Pages
UDXUNMIT420                     Unsupported X11 Components
    
    
    Thanks already for your cooperation and hopely this will help.
    
    
     Yves
3770.7TOOK::SWISTJim Swist LKG2-2/T2 DTN 226-7102Tue Sep 22 1992 20:2611
    After a couple of painful hours of trans-oceanic dbx, this problem
    appears to be a missing license.
    
    There is a mis-coordination between the PM startup and the kernel
    startup which causes the latter to notice the license problem first.
    Unfortunately it is only the PM that is equipped to issue an
    intelligent message.
    
    This is in common code so I'm not sure it's Ultrix-specific.  Could
    happen on VMS too.