Conference azur::mcc

3477.0. "List of supported phaseV events" by HLFS00::TIMMERMANS_A () Fri Jul 31 1992 07:41

Hi,

This is a screen output from a couple of failing phaseV alarm rule creations,
The event description used is copied from the DECnis events messages manual.
It seems that either DECmcc does not support every phaseV event or there is
some misunderstanding about the syntax.
Is there any list available of DECmcc supported phaseV events, it's hard to
find this in the dictionary.

Thanks in advance,

Adrie Timmermans.
 
$manage/enter
DECmcc (V1.2.0)

CREATE MCC 0 ALARMS RULE CHANGE_CONFIDENCE_INBSTR EXPRESSION = -
(OCCURS (NODE * EVENT DISPATCHER INBOUND STREAM * Change Confidence )) ,-
DESCRIPTION = " Change Confidence " , -
PERCEIVED SEVERITY = INDETERMINATE ,-
IN DOMAIN = PILOTNETWERK

MCC 0 ALARMS RULE CHANGE_CONFIDENCE_INBSTR
AT 30-JUL-1992 09:52:09

Valid event name was not found in expression.
CREATE MCC 0 ALARMS RULE CHANGE_CONFIDENCE_OUTBSTR EXPRESSION = -
(OCCURS (NODE * EVENT DISPATCHER OUTBOUND STREAM * Change Confidence )) ,-
DESCRIPTION = " Change Confidence " , -
PERCEIVED SEVERITY = INDETERMINATE ,-
IN DOMAIN = PILOTNETWERK

MCC 0 ALARMS RULE CHANGE_CONFIDENCE_OUTBSTR
AT 30-JUL-1992 09:52:11

Valid event name was not found in expression.
CREATE MCC 0 ALARMS RULE DISABLE_STREAM EXPRESSION = -
(OCCURS (NODE * EVENT DISPATCHER OUTBOUND STREAM * Disable Stream )),-
DESCRIPTION = " Disable Stream " , -
PERCEIVED SEVERITY = INDETERMINATE ,-
IN DOMAIN = PILOTNETWERK

MCC 0 ALARMS RULE DISABLE_STREAM
AT 30-JUL-1992 09:52:11

Missing right parenthesis in alarm expression.
CREATE MCC 0 ALARMS RULE ENABLE_STREAM EXPRESSION = -
(OCCURS (NODE * EVENT DISPATCHER OUTBOUND STREAM * Enable Stream )),-
DESCRIPTION = " Enable Stream " , -
PERCEIVED SEVERITY = INDETERMINATE ,-
IN DOMAIN = PILOTNETWERK

MCC 0 ALARMS RULE ENABLE_STREAM
AT 30-JUL-1992 09:52:12

Missing right parenthesis in alarm expression.
CREATE MCC 0 ALARMS RULE EVENTS_INBSTR_DISCONNECT -
EXPRESSION = (OCCURS (NODE * EVENT DISPATCHER INBOUND STREAM * Disconnect )) , -
DESCRIPTION = " Disconnect " , -
PERCEIVED SEVERITY = INDETERMINATE ,-
IN DOMAIN = PILOTNETWERK

MCC 0 ALARMS RULE EVENTS_INBSTR_DISCONNECT
AT 30-JUL-1992 09:52:12

Valid event name was not found in expression.
CREATE MCC 0 ALARMS RULE ALIGNMENT_ERROR -
EXPRESSION = (OCCURS (NODE * CSMA-CD STATION * Alignment Error )) , -
DESCRIPTION = " Alignment Error  " , -
PERCEIVED SEVERITY = INDETERMINATE ,-
IN DOMAIN = PILOTNETWERK

MCC 0 ALARMS RULE ALIGNMENT_ERROR
AT 30-JUL-1992 09:52:12

Valid event name was not found in expression.
CREATE MCC 0 ALARMS RULE CARRIER_CHECK_FAILURE -
EXPRESSION = (OCCURS (NODE * CSMA-CD STATION * Carrier Check Failure )) , -
DESCRIPTION = " Carrier Check Failure " , -
PERCEIVED SEVERITY = INDETERMINATE ,-
IN DOMAIN = PILOTNETWERK

MCC 0 ALARMS RULE CARRIER_CHECK_FAILURE
AT 30-JUL-1992 09:52:12

Valid event name was not found in expression.
CREATE MCC 0 ALARMS RULE DEVICE_FAILURE -
EXPRESSION = (OCCURS (NODE * DEVICE UNIT * Device Failure )) , -
DESCRIPTION = " Device Failure " , -
PERCEIVED SEVERITY = MAJOR ,-
IN DOMAIN = PILOTNETWERK

MCC 0 ALARMS RULE DEVICE_FAILURE
AT 30-JUL-1992 09:52:13

Valid event name was not found in expression.
exit
    

    try ...
    
    MCC> getevent node 'name'
     Type ? for a list of valid event IDs
    Event: ?
    .....
    .....
    
    this works for node4 and child entities -- I assume it should work for
    node etc..