| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 3243.1 | Switched executable? | TOOK::MINTZ | Erik Mintz, dtn 226-5033 | Wed Jun 24 1992 19:14 | 7 |
| Are you doing module development?
This sounds like a case of changing a management module, but not re-enrolling
it. That would result in dispatching to the wrong place in the executable.
-- Erik
|
| 3243.2 | | TOOK::SWIST | Jim Swist LKG2-2/T2 DTN 226-7102 | Wed Jun 24 1992 19:32 | 7 |
| No other messages?
Some things to look for: Missing MM, MM in wrong directory, protection
on MM or directory wrong, MCC_ logicals pointing to wrong places.
Which OS?
|
| 3243.3 | No development | 45353::WILLIAMSG | | Thu Jun 25 1992 10:03 | 17 |
| Hi there,
I have installed the MCC BMS T1.2-7 kit on my VAXstation 4000 model 60
running VMS 5.5 and Motif 1.0a.
What I am trying to do is use the alarms and services notifications to
pass info from applications into DECMCC.
I have followed through the instructions in the Alarms and Notifications
Services Use manual, but on registering the collector I get the message
listed in my original note.
As far as I am aware I have not changed any management modules.
I believe all the logicals point to the right place.
Gary.
|
| 3243.4 | try this | HLRG02::SYSTEM | DECmcc PABX AM development | Fri Jun 26 1992 11:33 | 8 |
| try:
$ man/ent
MCC> enroll mcc_collection_am
/-/ Henk.
|
| 3243.5 | Problem still exists | 45353::WILLIAMSG | | Sun Jun 28 1992 08:35 | 18 |
| Hi Henk,
I tried the command:
MCC> enroll mcc_collection_am
Which came back with:
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
On trying to add a data collector I still get the original error message.
I then tried performing the enroll through the DECWindows interface, and
it now seems to work.
Thanks for your help.
Gary.
|