| ACC-MIB DEFINITIONS ::= BEGIN
-------------------------------------------------------------------------------
-- Modified Modified Modified Modified Modified Modified
-- Date 02-21-94 Gabriel Sidler
-- The following code sequence was changed in order to get
-- the MIB translated on PolyCenter Network Manager 400:
-- Original Code:
-- accAtNetEntry OBJECT-TYPE
-- SYNTAX AccAtNetEntry
-- ACCESS not-accessible
-- STATUS mandatory
-- DESCRIPTION
-- " The information stored in NVM which defines an AppleTalk
-- network or half-router serial port. This information
-- supplements standard configuration parameters defined
-- in the experimental branch of the MIB."
-- INDEX { atportIndex }
-- ::= { accAtNetTable 1 }
-- Changed code:
-- accAtNetEntry OBJECT-TYPE
-- SYNTAX AccAtNetEntry
-- ACCESS not-accessible
-- STATUS mandatory
-- DESCRIPTION
-- " The information stored in NVM which defines an AppleTalk
-- network or half-router serial port. This information
-- supplements standard configuration parameters defined
-- in the experimental branch of the MIB. was atportIndex"
-- INDEX { ifIndex }
-- ::= { accAtNetTable 1 }
-- Problem: With the original code the MIB translator complained that the node
-- atportIndex is not defined. atportIndex is imported in the
-- IMPORTS section at the beginning of the MIB from RFC1243-MIB,
-- which is the Appletalk MIB.
-- The source of the problem seems to be that PolyCenter's MIB
-- translation utility doesn't import atportIndex from RFC1243_MIB.
-- The translator doesn't complain that it cannot import atportIndex.
-- It just ignores the import statement.
-- Resolution: In order to resolve the problem I replaced the
-- unknown node atportIndex by the known node ifIndex. Both are
-- of the same data type (32-bit integer) and both are used as
-- indices into tables. The node ifIndex is imported from
-- RFC-1155-SMI.
-- End of modified section / Gabriel Sidler
-------------------------------------------------------------------------------
-- Title: ACC MIB
-- Edition: "October 12, 1993"
-- By: The ACC MIB group (mib@acc.com)
-- MIB to manage ACC Bridge/Routers up to and including
-- Software Release 7.0.
--
--
-- This is the archival version of the enterprises MIB for
-- all products produced by Advanced Computer Communications
-- (ACC). In this version several enumerated INTEGERs have
-- been converted to plane INTEGER because they use zero as
-- an enumeration. Many MIB compilers (such as SunNet
-- Manager) complain about this use of zero, but will use the
-- information anyway. If you would like to obtain a copy of
-- this mib with enumerated values of zero, then contact ACC
-- directly at (805) 685-4455 and ask for customer service.
--
-- This mib has been tested with HP OpenView and SunNet Manager.
-- While HP OpenView does not produce any warnings when reading
-- in this mib, SunNet Manager does. The following is a list of
-- the warnings produced by mib2schema (the mib compiler for
-- SunNet Manager):
-- Translating ....
-- Warning: line#74, does not recognize IMPORTED symbol ifIndex
-- Warning: line#74, does not recognize IMPORTED symbol ipRouteDest
-- Warning: line#74, does not recognize IMPORTED symbol ipAdEntAddr
-- Warning: line#74, does not recognize IMPORTED symbol egpNeighAddr
-- Warning: line#76, does not recognize IMPORTED symbol atportIndex
-- Warning: The following INDEX entries in accSlotTable not resolved:
-- ifIndex
-- Warning: The following INDEX entries in accLapbParmTable not resolved:
-- ifIndex
-- Warning: The following INDEX entries in accLapbStatTable not resolved:
-- ifIndex
-- Warning: The following INDEX entries in accMlTable not resolved:
-- ifIndex
-- Warning: The following INDEX entries in accIpRoutingTable not resolved:
-- ipRouteDest
-- Warning: The following INDEX entries in accIpAddrTable not resolved:
-- ipAdEntAddr
-- Warning: The following INDEX entries in accEgpNeighTable not resolved:
-- egpNeighAddr
-- Warning: The following INDEX entries in accX25PortParmTable not resolved:
-- ifIndex
-- Warning: The following INDEX entries in accX25PktStatTable not resolved:
-- ifIndex
-- Warning: The following INDEX entries in accFrStatTable not resolved:
-- ifIndex
-- Warning: The following INDEX entries in accTrTable not resolved:
-- ifIndex
-- Warning: The following INDEX entries in accAtAarpStatsTable not resolved:
-- accAtPortTabIndex
-- Warning: The following INDEX entries in accAtNetTable not resolved:
-- atportIndex
-- Warning: The following INDEX entries in accAtPortStatsTable not resolved:
-- accAtPortTabIndex
-- Warning: The following INDEX entries in accAtZoneBynetTable not resolved:
-- accAtZoneBynameNetMin
-- accAtZoneBynameName
-- Warning: The following INDEX entries in accIsdnSubTable not resolved:
-- accIsdnDslIndex
-- Warning: The following INDEX entries in accIsdnStatTable not resolved:
-- accIsdnDslIndex
-- Translation Complete.
-- Schema file in "acc.mib.txt.schema
-- Oid file in "acc.mib.txt.oid"
--
--
IMPORTS
enterprises, Counter, Gauge, IpAddress,
NetworkAddress, TimeTicks
FROM RFC1155-SMI
ifIndex, ipRouteDest, ipAdEntAddr, egpNeighAddr
FROM RFC1213-MIB
atportIndex
FROM RFC1243-MIB
OBJECT-TYPE
FROM RFC-1212;
DisplayString ::= OCTET STRING
--OBJECT DEFINTIONS: ACC PRIVATE MIB
acc OBJECT IDENTIFIER ::= { enterprises 5 }
accSBAR OBJECT IDENTIFIER ::= { acc 1 }
accBRG OBJECT IDENTIFIER ::= { accSBAR 1 }
-- System Group
accSystem OBJECT IDENTIFIER ::= { accBRG 1 }
accSysInfo OBJECT IDENTIFIER ::= { accSystem 1 }
accUnitName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" A printable ASCII string up to 32 octets long that is
used to refer to a physical unit. This name is used
in the prompt displayed at the maintenance terminal."
::= { accSysInfo 1 }
accRomId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A printable ASCII string that contains information about
the hardware and the firmware (NOT the software). "
::= { accSysInfo 2 }
accSwVersion OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A printable ASCII string representing the software
version number of the running code."
::= { accSysInfo 3 }
accReset OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" A Set command on this object will cause an immediate reset
of the unit."
::= { accSysInfo 4 }
AccMemBlkEnt ::= SEQUENCE {
accMemBlkEntSize INTEGER,
accMemBlkEntTotal INTEGER,
accMemBlkEntMax Gauge,
accMemBlkEntInUse Gauge,
accMemBlkEntFails Counter
}
accMemStatTbl OBJECT-TYPE
SYNTAX AccMemBlkEnt
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Information about data buffer pools.
Instance is pool number."
INDEX { INTEGER } -- (1 - 7 is D RAM, 8 is M RAM, 9 - is C RAM)
::= { accSysInfo 5 }
accMemBlkEntSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Size (bytes) of these buffers"
::= { accMemStatTbl 1 }
accMemBlkEntTotal OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Total number of these buffers in pool, whether
or not they are in use"
::= { accMemStatTbl 2 }
accMemBlkEntMax OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" High water mark of usage of buffers"
::= { accMemStatTbl 3 }
accMemBlkEntInUse OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of buffers currently in use."
::= { accMemStatTbl 4 }
accMemBlkEntFails OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of times requests were made for a buffer
of this size that failed because none were avaliable."
::= { accMemStatTbl 5 }
accSessionCtrl OBJECT IDENTIFIER ::= { accSystem 2 }
accLogin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" A read attempt of this object is interpreted as a request
for login to the unit. The instance is an ASCII string
with the following (case sensitive) format:
CommunityString:Password
The GetResponse-PDU will return the accUnitName of the unit.
A write attempt is interpreted as a request to change
the password.
A GetNextRequest will not acknowledge the presence
of this object."
::= { accSessionCtrl 1 }
accLogout OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" A read attempt of this object is interpreted as a request
for logout to the unit. The instance is an ASCII string
with the following format:
CommunityString:Password
A GetNextRequest will not acknowledge the presence
of this object."
::= { accSessionCtrl 2 }
accLoginTimeout OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Session inactivity timer.
Zero disables timer (no timeout)
Default value is zero
Range is 0-86400 seconds"
::= { accSessionCtrl 3 }
accTrapTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccTrapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table of systems to which Trap Messages generated
by this unit shall be sent.
To delete an entry, a SetRequest-PDU for the specific
instance of accTrapAddr with a NULL value encoding is
used."
::= { accSystem 3 }
accTrapEntry OBJECT-TYPE
SYNTAX AccTrapEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A Trap Table entry "
INDEX { accTrapAddr }
::= { accTrapTable 1 }
AccTrapEntry ::= SEQUENCE {
accTrapAddr IpAddress,
accTrapSeverity INTEGER
}
accTrapAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" An IP address to which SNMP traps generated by the unit
are sent."
::= { accTrapEntry 1 }
accTrapSeverity OBJECT-TYPE
SYNTAX INTEGER (1..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" severity level of the traps to be sent
ACC products generate enterprise specific traps for which
different severity levels from 1 through 7 are assigned.
Level 1 refers to Only SNMP traps. Level 2 are
specific traps of highest urgency, and thus progressively
each level get more verbose. The normal operational level
is expected to be 3 or 4. Higher levels (i.e., 5-7) are
expected to generate many events which may be helpful
in identifying/isolating configuration related problems,
but may affect the performance of the unit."
::= { accTrapEntry 2 }
accClock OBJECT IDENTIFIER ::= { accSystem 4 }
accDate OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The octet string of six bytes representing the date
and time has the following format:
YYMMDDHHMMSS
where the valid range of values for each of the bytes
is as follows:
YY 0..99
MM 1..12
DD 1..31
HH 0..23
MM 0..59
SS 0..59"
::= { accClock 1 }
accUToffset OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" 3-byte date string, HH MM SS"
::= { accClock 2 }
accSysBootTime OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" 3-byte date string, HH MM SS"
::= { accClock 3 }
accAccessTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table of users authorized to log in to this unit.
To delete an entry, a SetRequest-PDU for the specific
instance of accAccessAddr with a NULL value encoding is
used."
::= { accSystem 6 }
accAccessEntry OBJECT-TYPE
SYNTAX AccAccessEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry of information about an authorized user."
INDEX { accAccessAddr, accAccessNetMask, accAccessUdpPort }
::= { accAccessTable 1 }
AccAccessEntry ::= SEQUENCE {
accAccessCmty OCTET STRING,
accAccessAddr IpAddress,
accAccessNetMask IpAddress,
accAccessUdpPort INTEGER
}
accAccessCmty OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Access community"
::= { accAccessEntry 1 }
accAccessAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IP address from which a login request is honored."
::= { accAccessEntry 2 }
accAccessNetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Subnet mask used to validate login requests."
::= { accAccessEntry 3 }
accAccessUdpPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" UDP port number of the SNMP application. "
::= { accAccessEntry 4 }
accReload OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Time until system reload shall occur.
Upon expiry of the timer, the system will load
and execute a new image of the application code.
The load file will come from diskette, local
EPROM, or over the network, depending on the
configuration of the unit."
::= { accSystem 7 }
accIfNames OBJECT IDENTIFIER ::= { accSystem 8 }
accIfNumNames OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Number of interfaces (physical and logical).
There are this many entries in the Name table."
::= { accIfNames 1 }
accIfNameTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIfNameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table of of mnemonic 'names' for physical and
logical interfaces"
::= { accIfNames 2 }
accIfNameEntry OBJECT-TYPE
SYNTAX AccIfNameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the Interface Name table "
INDEX { accIfNameIndex }
::= { accIfNameTable 1 }
AccIfNameEntry ::= SEQUENCE {
accIfNameIndex INTEGER,
accIfName OCTET STRING
}
accIfNameIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Interface number "
::= { accIfNameEntry 1 }
accIfName OBJECT-TYPE
SYNTAX OCTET STRING --(SIZE (5))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Mnemonic name for this interface"
::= { accIfNameEntry 2 }
accIfGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIfGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table of interface group descriptors supported by
this unit. Interface groups may be populated by
physical or logical interfaces, or combinations of
the two."
::= { accSystem 9 }
accIfGroupEntry OBJECT-TYPE
SYNTAX AccIfGroupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry of information about a interface group."
INDEX { accIFGroupIndex }
::= { accIfGroupTable 1 }
AccIfGroupEntry ::= SEQUENCE {
accIFGroupIndex INTEGER,
accIFGroupName OCTET STRING,
accIFGroupType INTEGER,
accIFGroupIndexBase INTEGER,
accIFGroupIndexMax INTEGER
}
accIFGroupIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Index for the accIfGroupTable."
::= { accIfGroupEntry 1 }
accIFGroupName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" If accIFGroupIndexBase and accIFGroupIndexMax
are equal then this object provides the full
name of the port, else this object has the prefix
of the port name. If this is a prefix then the
suffix is a numeric value from 1 to
(accIFGroupIndexMax - accIFGroupIndexBase + 1). "
::= { accIfGroupEntry 2 }
accIFGroupType OBJECT-TYPE
SYNTAX INTEGER {
physical-port(1),
bridge-port(2),
dial-port(3),
multi-link(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Type of port group"
::= { accIfGroupEntry 3 }
accIFGroupIndexBase OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Lowest IFIndex in this IFGroup"
::= { accIfGroupEntry 4 }
accIFGroupIndexMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of interfaces supported in this
IFGroup"
::= { accIfGroupEntry 5 }
-- Spanning Tree Protocol Group
accStp OBJECT IDENTIFIER ::= { accBRG 2 }
accStpPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Among all devices participating in spanning tree, the
one with the highest priority (numerically lowest
value of this parameter) is elected as the Root
of the spanning tree."
::= { accStp 1 }
accStpId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Unique bridge identifier of this bridge. This object
comprises two parts, one of which is the MAC address,
and the other of which is the brStpPriority and is the
more significant part in priority comparisons."
::= { accStp 2 }
accStpBrAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" MAC address of this bridge."
::= { accStp 3 }
accStpMode OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" State of this Bridge's participation in Spanning Tree.
Spanning Tree takes care of network connectivity changes
caused by addition/removal/failure of links.
It avoids loops when any two networks have redundant
connections between them."
::= { accStp 4 }
accStpFilterTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Minimum time period elapsing between the
transmission of Hello frames through a given Bridge Port.
No more than two Hello frames shall be transmitted in any
brStpFilterTime period."
::= { accStp 5 }
accStpMcastAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" A unique MAC group address, recognised by all the Bridges
within the Bridged Local Area Network."
::= { accStp 6 }
accStpTopChangeDet OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Indicates if this unit has detected the Topology
change indication in the hello BPDU.
no(0),
yes(1)
"
::= { accStp 7 }
accStpTopChange OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Indicates if the STP topology of a network is in
process of changing.
no(0),
yes(1)
"
::= { accStp 8 }
accStpTopChangeTimer OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" This timer serves to determine the time period for
which hello frames are transmitted with the
Topology Change flag parameter set by the Bridge when
it is the Root following the detection of a topology
change."
::= { accStp 9 }
accStpDesRoot OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Bridge Identifier of the device currently
assumed by this unit to be the Root."
::= { accStp 10 }
accStpRootPathCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Current path cost to the Root Bridge."
::= { accStp 11 }
accStpRootPort OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Port Number of the one Port in the direction of the Root.
(Value is meaningless if this unit is the Root)."
::= { accStp 12 }
accStpMaxAge OBJECT-TYPE
SYNTAX INTEGER (4..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value of the Max Age parameter when the Bridge is the
Root or attempting to become the Root.
The Max Age parameter is conveyed to ensure that each Bridge
in a Bridged Local Area Network has a consistent value
against which to test the age of stored protocol information."
::= { accStp 13 }
accStpHelloTime OBJECT-TYPE
SYNTAX INTEGER (2..1800)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Interval between Hello frames that this
Bridge will initiate when it is Root or is attempting
to be Root."
::= { accStp 14 }
accStpForwardDelay OBJECT-TYPE
SYNTAX INTEGER (5..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The time (seconds) spent in the Listening state while
moving from the Blocking state to the Learning state.
The time (seconds) spent in the Learning state while
moving from the Listening state to the Forwarding state.
The value (seconds) used for the ageing time of dynamic
entries in the Forwarding Database table wile the Topology
Change flag is set in protocol messages received from
the Root."
::= { accStp 15 }
accStpUpTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accStp 16 }
accStpTopChangeCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accStp 17 }
-- Bridge Port Group
accBrPort OBJECT IDENTIFIER ::= { accBRG 3 }
accBrPortInfo OBJECT IDENTIFIER ::= { accBrPort 1 }
accBrPortStats OBJECT IDENTIFIER ::= { accBrPortInfo 1 }
accBrPortInNUcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of non-unicast packets received"
::= { accBrPortStats 1 }
accBrPortInUcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of unicast packets received"
::= { accBrPortStats 2 }
accBrPortInDupPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of in packets duplicated"
::= { accBrPortStats 3 }
accBrPortOutNUcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of non-unicast packets sent"
::= { accBrPortStats 4 }
accBrPortOutUcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of unicast packets sent"
::= { accBrPortStats 5 }
accBrPortStpInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of spanning tree packets recieved"
::= { accBrPortStats 6 }
accBrPortStpOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of spanning tree packets sent"
::= { accBrPortStats 7 }
accBrPortOutDelayDiscPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of output packets dropped because
they were held in queue too long"
::= { accBrPortStats 8 }
accBrPortOutPrioDiscPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets discarded on ouput by the
protocol priority filter mechanism"
::= { accBrPortStats 9 }
accBrPortOutQLen OBJECT-TYPE
SYNTAX Gauge
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Length of port output queue"
::= { accBrPortStats 10 }
accBrPortInDiscPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of bridge packets discarded
at input"
::= { accBrPortStats 11 }
accBrPortStpPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Relative STP priority of this port"
::= { accBrPortInfo 2 }
accBrPortId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Port ID"
::= { accBrPortInfo 3 }
accBrPortState OBJECT-TYPE
SYNTAX INTEGER (0..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" accBrPortState reports the operational status
of the port; it is writable for backward
compatibility (writes also update
accBrPortAdminStatus).
disabled(0),
blocking(1),
listening(2),
learning(3),
forwarding(4)
"
::= { accBrPortInfo 5 }
accBrPortStpPathCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Path cost"
::= { accBrPortInfo 6 }
accBrPortStpDesRoot OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Designated root"
::= { accBrPortInfo 7 }
accBrPortStpDesCost OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Cost to designated root"
::= { accBrPortInfo 8 }
accBrPortStpDesBridge OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Designated bridge"
::= { accBrPortInfo 9 }
accBrPortStpDesPort OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Designated port"
::= { accBrPortInfo 10 }
accBrPortAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" accBrPortAdminStatus reports the administrative
status of the port; an update to this variable
is effective immediately. Note that the
operational status may be disabled even though
accBrPortAdminStatus is enabled, if the bridge
port's protocol type is incompatible with the
associated physical port protocol type."
::= { accBrPortInfo 11 }
accBrPortLine OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Index of physical port associated with this bridge
port."
::= { accBrPortInfo 12 }
accBrPortProtocol OBJECT-TYPE
SYNTAX INTEGER {
enet(1),
x25(2),
lapb(3),
ffr(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" note that these enumerated values match those in
accSlotProtocol; the current implementation will
not permit accBrPortProtocol to be set to x25."
::= { accBrPortInfo 13 }
accBrPortFrDlci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Frame Relay DLCI for this port"
::= { accBrPortInfo 14 }
accBrPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Bridge Port Index"
::= { accBrPortInfo 15 }
accBrPortXBridgeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Bridge Port translating bridge status"
::= { accBrPortInfo 16 }
-- Bridge FDB Group
accBridge OBJECT IDENTIFIER ::= { accBRG 4 }
accBrFdbTimeout OBJECT-TYPE
SYNTAX INTEGER (10..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Time (seconds) for which a learned Forwarding Database
entry is valid before being deleted if it has not been seen."
::= { accBridge 1 }
accBrFdbLearnMode OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" When Learning Mode is active, Bridges update their
Forwarding Database with dynamic entries learned by
inspection of the Source MAC Address of received frames.
When learning mode is off, Bridges discard packets which
are not indicated as forward in their Forwarding Database.
off(0),
on(1)
"
::= { accBridge 2 }
accBrFdbRamCurrSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of entries in the RAM FDB table that contains
static as well as dynamic entries."
::= { accBridge 3 }
accBrFdbRamMaxSize OBJECT-TYPE
SYNTAX INTEGER (64..1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The maximum number of entries configured for the RAM
FDB table."
::= { accBridge 5 }
accBrFdbNvmMaxSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of static FDB entries that can be saved
in the NVM RAM."
::= { accBridge 6 }
accBrFdbTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccBrFdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of Forwarding Database entries. Entries may be
added/deleted either through learning or explicit
management action."
::= { accBridge 7 }
accBrFdbEntry OBJECT-TYPE
SYNTAX AccBrFdbEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A Forwarding Database entry which defines Bridge action
to be taken based upon the destination MAC Address of
received frames."
INDEX { accBrFdbEntMacAddr }
::= { accBrFdbTable 1 }
AccBrFdbEntry ::= SEQUENCE {
accBrFdbEntMacAddr OCTET STRING,
accBrFdbEntDisp INTEGER,
accBrFdbEntPort INTEGER,
accBrFdbEntTimer INTEGER
}
accBrFdbEntMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" MAC Address of the Forwarding Database Entry.
Set this object to NULL to delete entry."
::= { accBrFdbEntry 1 }
accBrFdbEntDisp OBJECT-TYPE
SYNTAX INTEGER (0..2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Disposition of received Frame. Note that a Frame is
never sent back out on the Port on which it was received.
forward(0),
flood(1),
discard(2)
"
::= { accBrFdbEntry 2 }
accBrFdbEntPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Port to which frame is to be relayed for frame to be
forwarded. Has no meaning for other dispositions."
::= { accBrFdbEntry 3 }
accBrFdbEntTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Age of Forwarding Database Entry. A value of
zero indicates a static entry."
::= { accBrFdbEntry 4 }
accBrFpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccBrFpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of Forwarding Priority Entries.
Entries are added/deleted via management action."
::= { accBridge 8 }
accBrFpEntry OBJECT-TYPE
SYNTAX AccBrFpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Relative Priority between frames to be forwarded
on a Bridge Port. "
INDEX { accBrFpProt }
::= { accBrFpTable 1 }
AccBrFpEntry ::= SEQUENCE {
accBrFpIndex INTEGER,
accBrFpProt INTEGER,
accBrFpPrio INTEGER
}
accBrFpIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Port number "
::= { accBrFpEntry 1 }
accBrFpProt OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" protocol type.
Set this object to NULL to delete the entry."
::= { accBrFpEntry 2 }
accBrFpPrio OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Relative forwarding priority assigned to protocol.
discard(0),
low(1),
normal(2),
high(3)
"
::= { accBrFpEntry 3 }
accBrFpPriDefault OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Default priority to use for protocol types not specifically
enumerated in table.
discard(0),
low(1),
normal(2),
high(3)
"
::= { accBridge 9 }
accBrNumPorts OBJECT-TYPE
SYNTAX INTEGER (2..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of physical ports of unit."
::= { accBridge 10 }
accBrCompress OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Bridge frame compression mode."
::= { accBridge 11 }
accBrMode OBJECT-TYPE
SYNTAX INTEGER {
on(1), -- bridging is enabled
off(2), -- bridging is disabled
passive(3) -- forwarding is disabled
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Bridge mode. When the mode is set to 'passive',
internally generated traffic is forwarded or flooded
as appropriate; external traffic is not forwarded to
other external ports."
::= { accBridge 15 }
-- Slot Group
accSlot OBJECT IDENTIFIER ::= { accBRG 5 }
accSlotTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of physical port entries. The number of entries is
given by the value of accSlotNum."
::= { accSlot 2 }
AccSlotEntry ::= SEQUENCE {
accSlotLastChange OCTET STRING,
accSlotInPkts Counter,
accSlotOutPkts Counter,
accSlotNumChanges Counter,
accSlotClockMode INTEGER,
accSlotProtocol INTEGER,
accSlotQueueMode INTEGER,
accSlotResyncMode INTEGER,
accSlotCompressMode INTEGER,
accSlotCompressLength INTEGER,
accSlotCompressV42bisP1 INTEGER,
accSlotCompressV42bisP2 INTEGER
}
accSlotEntry OBJECT-TYPE
SYNTAX AccSlotEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table entry providing information about a specific
physical port. "
INDEX { ifIndex }
::= { accSlotTable 1 }
accSlotLastChange OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Time when a state change was last detected on this
physical port."
::= { accSlotEntry 9 }
accSlotInPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of packets received on this physical interface."
::= { accSlotEntry 11 }
accSlotOutPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of packets transmitted on this physical interface."
::= { accSlotEntry 17 }
accSlotNumChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of times that this interface has changed state
(either up-to-down or down-to-up)."
::= { accSlotEntry 21 }
accSlotClockMode OBJECT-TYPE
SYNTAX INTEGER {
unknown(1),
ext(2),
pp(3),
ext2(4),
int(5),
slave(6)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Clock mode of this port"
::= { accSlotEntry 22 }
accSlotProtocol OBJECT-TYPE
SYNTAX INTEGER {
enet(1),
x25(2),
lapb(3),
ffr(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Protocol used on this slot.
note that these enumerated values match those
in accBrPortProtocol."
::= { accSlotEntry 23 }
accSlotQueueMode OBJECT-TYPE
SYNTAX INTEGER {
express(1),
precedence(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Queuing mode for this slot
Fair queuing provides per-conversation
bandwidth allocation, with additional
bandwidth allocated to higher priority traffic.
Precedence queueing gives first-in-first-out
service amongst priority queues."
::= { accSlotEntry 24 }
accSlotResyncMode OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Establishes operational mode of the
Resync function for crypto gear.
When active, a link-down condition
intitiates resynchronization, which is
manifested by setting the DTR (RTS)
signal active (low) for 10 milliseconds."
::= { accSlotEntry 26 }
accSlotCompressMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Establishes operational mode of Data
Compression. This functionality is
appropriate for serial lines. "
::= { accSlotEntry 27 }
accSlotCompressLength OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Minimum length of packet to compress "
::= { accSlotEntry 28 }
accSlotCompressV42bisP1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of codewords "
::= { accSlotEntry 29 }
accSlotCompressV42bisP2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Maximum string size "
::= { accSlotEntry 30 }
-- LAPB Group
accLapb OBJECT IDENTIFIER ::= { accBRG 7 }
accLapbNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of HDLC ports"
::= { accLapb 1 }
accLapbParmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccLapbParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" HDLC LAPB port parameters"
::= { accLapb 2 }
AccLapbParmEntry ::= SEQUENCE {
accLapbIndex INTEGER,
accLapbType INTEGER,
accLapbT1Timer INTEGER,
accLapbN2Count INTEGER,
accLapbFrameWindow INTEGER,
accLapbFlags INTEGER
}
accLapbParmEntry OBJECT-TYPE
SYNTAX AccLapbParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" LAPB parameters for a port."
INDEX { ifIndex }
::= { accLapbParmTable 1 }
accLapbIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Physical port number of this interface."
::= { accLapbParmEntry 1 }
accLapbType OBJECT-TYPE
SYNTAX INTEGER (0..1)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" LAPB station type for this interface.
dte(0),
dce(1)
"
::= { accLapbParmEntry 2 }
accLapbT1Timer OBJECT-TYPE
SYNTAX INTEGER (1..32000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" T1 timer value (in milliseconds) for this
interface."
DEFVAL { 3000 }
::= { accLapbParmEntry 3 }
accLapbN2Count OBJECT-TYPE
SYNTAX INTEGER (2..20)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" N2 counter (retry counter) for this interface."
DEFVAL { 20 }
::= { accLapbParmEntry 4 }
accLapbFrameWindow OBJECT-TYPE
SYNTAX INTEGER (1..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" LAPB frame window. If a value greater than
7 is specified, modulo-128 sequencing is used
instead of modulo-8 sequencing."
DEFVAL { 7 }
::= { accLapbParmEntry 5 }
accLapbFlags OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of flags to insert between frames
on transmission."
DEFVAL { 2 }
::= { accLapbParmEntry 6 }
accLapbStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccLapbStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of statistics for serial ports
configured for LABP protocol."
::= { accLapb 3 }
AccLapbStatEntry ::= SEQUENCE {
accLapbStatIndex INTEGER,
accLapbStatBadFCSIns Counter,
accLapbStatFRMRIns Counter,
accLapbStatT1Timeouts Counter,
accLapbStatREJIns Counter,
accLapbStatREJOuts Counter,
accLapbStatShortIns Counter
}
accLapbStatEntry OBJECT-TYPE
SYNTAX AccLapbStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" LAPB statistics for a specific port."
INDEX { ifIndex }
::= { accLapbStatTable 1 }
accLapbStatIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Port number for this LAPB serial port"
::= { accLapbStatEntry 1 }
accLapbStatBadFCSIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of LAPB frames received with bad
frame checksum (FCS)."
::= { accLapbStatEntry 2 }
accLapbStatFRMRIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of LAPB frames received with
framing errors"
::= { accLapbStatEntry 3 }
accLapbStatT1Timeouts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of T1 timeouts detected on this port"
::= { accLapbStatEntry 4 }
accLapbStatREJIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" number of REJECT LAPB frames received"
::= { accLapbStatEntry 5 }
accLapbStatREJOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of LAPB REJECT frames transmitted"
::= { accLapbStatEntry 6 }
accLapbStatShortIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of short LAPB frames received"
::= { accLapbStatEntry 7 }
-- Ethernet Group
accEnet OBJECT IDENTIFIER ::= { accBRG 8 }
accEnetNum OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Ethernet ports on this unit."
::= { accEnet 1 }
accEnetParmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccEnetParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table of parameters of Ethernet ports
The number of table entries is accEnetNum."
::= { accEnet 2 }
accEnetParmEntry OBJECT-TYPE
SYNTAX AccEnetParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Parameters relative to a specific Ethernet port."
INDEX { accEnetPortNo }
::= { accEnetParmTable 1 }
AccEnetParmEntry ::= SEQUENCE {
accEnetPortNo INTEGER
}
accEnetPortNo OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of this ethernet port."
::= { accEnetParmEntry 1 }
accEnetStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccEnetStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of per-port statistics for ports
configured as Ethernet LANs."
::= { accEnet 3 }
accEnetStatEntry OBJECT-TYPE
SYNTAX AccEnetStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Statistics for specific ethernet ports."
INDEX { accEnetIndex }
::= { accEnetStatTable 1 }
AccEnetStatEntry ::= SEQUENCE {
accEnetIndex INTEGER,
accEnetStatCRCErrs Counter,
accEnetStatAlignErrs Counter,
accEnetStatOutColls Counter,
accEnetStatJabberConds Counter,
accEnetStatCarrierLosts Counter,
accEnetStatHeartbeatErrs Counter,
accEnetStatGiants Counter,
accEnetStatOneRetrys Counter,
accEnetStatMultRetrys Counter,
accEnetStatLateColls Counter,
accEnetChipCrashes Counter
}
accEnetIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Port number of this entry"
::= { accEnetStatEntry 1 }
accEnetStatCRCErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of CRC (Checksum) errors detected on this
port."
::= { accEnetStatEntry 2 }
accEnetStatAlignErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of alignment errors detected."
::= { accEnetStatEntry 3 }
accEnetStatOutColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of collisions detected on output."
::= { accEnetStatEntry 4 }
accEnetStatJabberConds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of jabber conditions detected."
::= { accEnetStatEntry 5 }
accEnetStatCarrierLosts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of losses of carrier detected."
::= { accEnetStatEntry 6 }
accEnetStatHeartbeatErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of heartbeat errors detected."
::= { accEnetStatEntry 7 }
accEnetStatGiants OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of giant frames detected."
::= { accEnetStatEntry 8 }
accEnetStatOneRetrys OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of times a retry condition was detected."
::= { accEnetStatEntry 9 }
accEnetStatMultRetrys OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Total number of retries."
::= { accEnetStatEntry 10 }
accEnetStatLateColls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of late collisions detected."
::= { accEnetStatEntry 11 }
accEnetChipCrashes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of times aberrant behaviour
was detected in Ethernet chip"
::= { accEnetStatEntry 12 }
-- Multilink Group
accMultilink OBJECT IDENTIFIER ::= { accBRG 9 }
accMlTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccMlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table of Multilink (load-sharing) groups."
::= { accMultilink 2 }
AccMlEntry ::= SEQUENCE {
accMlAdminStatus INTEGER
}
accMlEntry OBJECT-TYPE
SYNTAX AccMlEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Info on specific multilink group "
INDEX { ifIndex }
::= { accMlTable 1 }
accMlAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2),
undefined(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Status of load sharing capability. In those systems
which support the accSlotProtocol object, the protocol
must be set to HDLC for both ports."
::= { accMlEntry 7 }
-- Async Port (Console) Group
accAsPort OBJECT IDENTIFIER ::= { accBRG 10 }
accConsole OBJECT IDENTIFIER ::= { accAsPort 2 }
accConsoleParms OBJECT IDENTIFIER ::= { accConsole 1 }
accConsoleSpeed OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Baud rate for this port;
{1200, 2400, 4800, 7200, 9600 } are permitted."
::= { accConsoleParms 5 }
-- ARP Group
accArp OBJECT IDENTIFIER ::= { accBRG 11 }
accArpTimeout OBJECT-TYPE
SYNTAX INTEGER (1..1440)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Aging timer value (in minutes) for ARP table entries."
::= { accArp 1 }
accArpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The ARP (Address Resolution Protocol) table.
This is an alternate view of the atTable."
::= { accArp 2 }
accArpEntry OBJECT-TYPE
SYNTAX AccArpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A correspondence between logical (IP)
and physical (MAC) addresses."
INDEX { accArpNetAddress }
::= { accArpTable 1 }
AccArpEntry ::= SEQUENCE {
accArpPhysAddress OCTET STRING,
accArpNetAddress IpAddress,
accArpEntStatus INTEGER
}
accArpPhysAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Ethernet address of the ARP table entry."
::= { accArpEntry 1 }
accArpNetAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IP address of this entry.
Set this object to NULL to delete an entry."
::= { accArpEntry 2 }
accArpEntStatus OBJECT-TYPE
SYNTAX INTEGER {
pending(1),
dynamic(2),
ourbox(4),
permanent(8),
apepending(16),
stepending(32),
confirmpending(64),
confirmsrpending(128)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Status of the ARP table entry."
DEFVAL { ourbox }
::= { accArpEntry 3 }
accArpType OBJECT-TYPE
SYNTAX INTEGER (0..2)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" State of proxy ARP capability.
normal(0),
proxy(2)
"
::= { accArp 3 }
accArpReqRcvds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of ARP Requests received."
::= { accArp 4 }
accArpReqSents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of ARP Requests sent."
::= { accArp 5 }
accArpRspRcvds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of ARP Responses received."
::= { accArp 6 }
accArpRspSents OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of ARP Responses sent."
::= { accArp 7 }
accArpInErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of ARP input errors encountered."
::= { accArp 8 }
accArpOutErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of ARP output errors encountered."
::= { accArp 9 }
accArpUnknownProtos OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of address resolution requests for which
this ARP implementation did not recognize the protocol."
::= { accArp 10 }
-- IP Routing Group
accIpRoutingTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpRoutingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Widening of standard IP routing table
Entries are added/deleted in conjunction with
operations on the standard routing table."
::= { accBRG 12 }
AccIpRoutingEntry ::= SEQUENCE {
accIpRouteDestSubnet IpAddress
}
accIpRoutingEntry OBJECT-TYPE
SYNTAX AccIpRoutingEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Additional information about a route."
INDEX { ipRouteDest }
::= { accIpRoutingTable 1 }
accIpRouteDestSubnet OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Subnet mask of destination "
::= { accIpRoutingEntry 2 }
-- Probe Group
accProbe OBJECT IDENTIFIER ::= { accBRG 13 }
accProbeAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Hexadecimal representation of the memory
address of the long-word whose content we seek."
::= { accProbe 1 }
accProbeData OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Contents (long word) of memory location
of accProbeAddr."
::= { accProbe 2 }
-- IP Address Group
accIpAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" IP Address translation table extension"
::= { accBRG 14 }
AccIpAddrEntry ::= SEQUENCE {
accIpAddrMtu INTEGER,
accIpAddrSecurityType INTEGER,
accIpAddrSecurityClass INTEGER,
accIpAddrSecurityAuth OCTET STRING,
accIpAddrBcastAddr IpAddress,
accIpAdEntMetric INTEGER
}
accIpAddrEntry OBJECT-TYPE
SYNTAX AccIpAddrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Adds additional information to the ipAddrTable."
INDEX { ipAdEntAddr }
::= { accIpAddrTable 1 }
accIpAddrMtu OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum Transmission Unit size for this entry.
(46..1500) for Ethernet ports,
(128..2048) for HDLC or X25 ports
Object will be set to default value if not present
in entry-adding SET PDU."
::= { accIpAddrEntry 1 }
accIpAddrSecurityType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
basic(2),
strip(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Type of security for this entry."
DEFVAL { none }
::= { accIpAddrEntry 2 }
accIpAddrSecurityClass OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Security classification for this entry.
Object will be set to default value if not present
in entry-adding SET PDU."
::= { accIpAddrEntry 3 }
accIpAddrSecurityAuth OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Security authorization for this entry."
::= { accIpAddrEntry 4 }
accIpAddrBcastAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IP Broadcast address associated with this entry.
Object will be set to default value if not present
in entry-adding SET PDU."
::= { accIpAddrEntry 5 }
accIpAdEntMetric OBJECT-TYPE
SYNTAX INTEGER (0..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Metric "
DEFVAL { 0 }
::= { accIpAddrEntry 6 }
-- EGP Neighbor Group
accEgp OBJECT IDENTIFIER ::= { accBRG 15 }
accEgpNeighTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccEgpNeighEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" This table is an extension (widening) of the
egpNeighTable."
::= { accEgp 1 }
AccEgpNeighEntry ::= SEQUENCE {
accEgpUptime TimeTicks,
accEgpFAS INTEGER,
accEgpSndSeqs Counter,
accEgpRcvSeqs Counter
}
accEgpNeighEntry OBJECT-TYPE
SYNTAX AccEgpNeighEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Additional information about an EGP neighbor."
INDEX { egpNeighAddr }
::= { accEgpNeighTable 1 }
accEgpUptime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Uptime of EGP neighbor"
::= { accEgpNeighEntry 1 }
accEgpFAS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Foreign Autonomous System number"
::= { accEgpNeighEntry 2 }
accEgpSndSeqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of sequences sent to this egp neighbor."
::= { accEgpNeighEntry 3 }
accEgpRcvSeqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of sequences received from this EGP neighbor."
::= { accEgpNeighEntry 4 }
accEgpAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Administrative status of EGP protocol."
::= { accEgp 2 }
accEgpASNumber OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Autonomous System number, assigned by central
administrative authority."
::= { accEgp 3 }
accEgpMetric OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Relative route cost."
::= { accEgp 4 }
accEgpInErrMsgs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of erroneous EGP messages received"
::= { accEgp 5 }
accEgpOutErrMsgs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of errors encountered during EGP
message generation."
::= { accEgp 6 }
accEgpStateChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of EGP state changes."
::= { accEgp 7 }
accEgpLastChange OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Timestamp of last EGP state change."
::= { accEgp 8 }
-- RIP Group
accRip OBJECT IDENTIFIER ::= { accBRG 16 }
accRipAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2),
extended(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Adminstrative status of RIP protocol.
Extended causes subnet mask information to be included in
RIP packets, permitting variable-length subnet masking."
::= { accRip 1 }
accRipUpdateTimer OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This unit will send updates to its neighbors at the interval
established by this timer. Note that all other RIP timers
are scaled off this value."
::= { accRip 2 }
accRipGateway OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2),
extended(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Declares if the unit is the gateway unit for an AS.
Indicates if the unit does or does not advertise that
it is the default route.
Extended mode causes EGP-derived information to be
included in RIP packets."
::= { accRip 3 }
accRipMetric OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Metric used with the default route in routing updates
when this unit is acting as a gateway.
Unit is hopcount; 16 represents infinity."
::= { accRip 4 }
accRipNeighborList OBJECT IDENTIFIER ::= { accRip 5 }
-- A list of RIP neighbors.
-- The instance of an entry is its IP address.
-- To add an element, the VarBind of a SetRequest PDU will
-- have both an object instance and value of accRipNeighbor.
-- To delete an element, a SetRequest-PDU for the specific
-- instance of accRipNeighbor with a NULL value encoding is
-- used.
accRipNeighbor OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" A neighbor to whom routing updates are sent,
and from whom updates are accepted.
RIP neighbors must be on the local network."
::= { accRipNeighborList 1 }
accRipInCmdCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RIP command packets successfully received."
::= { accRip 6 }
accRipInRspCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RIP response packets successfully received."
::= { accRip 7 }
accRipInErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RIP response and command packets received with
errors. Also includes count of packets that could
not be handled due to internal errors."
::= { accRip 8 }
accRipOutCmdCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RIP command packets successfully transmitted."
::= { accRip 9 }
accRipOutRspCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RIP response packets successfully transmitted."
::= { accRip 10 }
-- X.25 Group
-- X.25 addresses are represented as variable-length
-- ASCII strings (length is between 0 and 15, inclusive).
accX25 OBJECT IDENTIFIER ::= { accBRG 17 }
accX25AtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccX25AtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Address translation table for X.25 interfaces.
This is a superset of the standard address
translation table.
Entries are added/deleted via management action."
::= { accX25 1 }
accX25AtEntry OBJECT-TYPE
SYNTAX AccX25AtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Address translation entry for X.25 interfaces."
INDEX { accX25AtIfIndex,
accX25AtIpAddress }
::= { accX25AtTable 1 }
AccX25AtEntry ::= SEQUENCE {
accX25AtIfIndex INTEGER,
accX25AtIpAddress NetworkAddress,
accX25AtNetInOutAddr OCTET STRING,
accX25AtNetInAddr OCTET STRING
}
accX25AtIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Interface number (ifIndex) for which this
translation entry is valid."
::= { accX25AtEntry 1 }
accX25AtIpAddress OBJECT-TYPE
SYNTAX NetworkAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IP Address of this entry
Set this object to NULL to delete entry."
::= { accX25AtEntry 2 }
accX25AtNetInOutAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" X.25 address to use when calling this destination.
(both X.25 addresses are checked when mapping an
X.25 address to an IP address)
Object required in entry-adding SET PDU."
::= { accX25AtEntry 3 }
accX25AtNetInAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Alternate X.25 address to check when mapping an
X.25 address to an IP address
Object will be set to default value if not present
in entry-adding SET PDU."
::= { accX25AtEntry 4 }
accX25SubnetParmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccX25SubnetParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Per-network parameters for IP networks attached
via X.25 interface.
Entries added/deleted via management action."
::= { accX25 2 }
accX25SubnetParmEntry OBJECT-TYPE
SYNTAX AccX25SubnetParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" X.25-specific parameters for this IP network"
INDEX { accX25SubnetAddr }
::= { accX25SubnetParmTable 1 }
AccX25SubnetParmEntry ::= SEQUENCE {
accX25SubnetAddr IpAddress,
accX25Facility INTEGER,
accX25PktNegot INTEGER,
accX25WindowNegot INTEGER
}
accX25SubnetAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Network/subnet number of IP network
Set this object to NULL to delete entry."
::= { accX25SubnetParmEntry 1 }
accX25Facility OBJECT-TYPE
SYNTAX INTEGER {
none(1),
std(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" selects whether DDN Standard Mode facility is
included in call requests. "
DEFVAL { none }
::= { accX25SubnetParmEntry 2 }
accX25PktNegot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" specifies value for Packet Size Negotiation Facility
(power of 2 between 16 and 1024), or zero if Packet
Size Negotiation Facility is not to be used."
DEFVAL { 0 }
::= { accX25SubnetParmEntry 3 }
accX25WindowNegot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" specifies value for Window Size Negotiation Facility
(between 1 and 127 inclusive), or zero if Window
Size Negotiation Facility is not to be used."
DEFVAL { 0 }
::= { accX25SubnetParmEntry 4 }
accX25PortParmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccX25PortParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Per-port parameters for X.25 interfaces."
::= { accX25 3 }
AccX25PortParmEntry ::= SEQUENCE {
accX25PortParmIndex INTEGER,
accX25AddrMode INTEGER,
accX25PktSize INTEGER,
accX25PktWind INTEGER,
accX25SvcNumber INTEGER,
accX25SvcBase INTEGER,
accX25ExtendClr INTEGER,
accX25ExtendSeq INTEGER,
accX25IdleMin TimeTicks,
accX25IdleMax TimeTicks,
accX25IdleScale TimeTicks,
accX25SvcMax INTEGER,
accX25SvcLimit INTEGER,
accX25OpenThresh INTEGER,
accX25SvcMin INTEGER,
accX25SvcDelay INTEGER,
accX25InitBackoff INTEGER,
accX25MaxBackoff INTEGER,
accX25OurAddress OCTET STRING
}
accX25PortParmEntry OBJECT-TYPE
SYNTAX AccX25PortParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" X25 parameters of a specific port."
INDEX { ifIndex }
::= { accX25PortParmTable 1 }
accX25PortParmIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Port number"
::= { accX25PortParmEntry 1 }
accX25AddrMode OBJECT-TYPE
SYNTAX INTEGER {
table(1), -- use translation table
-- (accX25AtTable)
ddn(2), -- use DDN mapping algorithm
bfe(3) -- use Blacker algorithm
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" specifies address translation technique."
DEFVAL { table }
::= { accX25PortParmEntry 2 }
accX25PktSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" specifies default data packet size for this port."
DEFVAL { 128 }
::= { accX25PortParmEntry 3 }
accX25PktWind OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" specifies default packet window size for this port."
DEFVAL { 2 }
::= { accX25PortParmEntry 4 }
accX25SvcNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" specifies maximum number of switched virtual
circuits to be used on this port."
DEFVAL { 256 }
::= { accX25PortParmEntry 5 }
accX25SvcBase OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" specifies lowest Logical Channel Identifier
to be used for switched virtual circuits."
DEFVAL { 1 }
::= { accX25PortParmEntry 6 }
accX25ExtendClr OBJECT-TYPE
SYNTAX INTEGER {
on(1), -- use/accept extended clear format
off(2) -- disallow extended clear format
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" specifies whether extended format for call clearing
packets (as defined by X.25-1984) is permitted"
DEFVAL { off }
::= { accX25PortParmEntry 7 }
accX25ExtendSeq OBJECT-TYPE
SYNTAX INTEGER {
normal(1), -- modulo-8 sequence numbers
extended(2) -- modulo-128 sequence numbers
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Use of extended sequence numbers"
DEFVAL { normal }
::= { accX25PortParmEntry 8 }
accX25IdleMin OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" minimum idle time for closing circuits; a circuit
will not be cleared until it has been idle (no data
has been sent or received) for at least this amount
of time."
DEFVAL { 30000 }
::= { accX25PortParmEntry 9 }
accX25IdleMax OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" maximum idle time for closing circuits; a circuit
will be cleared when its idle time exceeds this
value."
DEFVAL { 180000 }
::= { accX25PortParmEntry 10 }
accX25IdleScale OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" scale factor for idle timeout: a circuit will
be cleared when it has been idle for accX25IdleMin
plus accX25IdleScale times the number of available
circuits."
DEFVAL { 1000 }
::= { accX25PortParmEntry 11 }
accX25SvcMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of virtual circuits which can be
opened to a single destination."
DEFVAL { 1 }
::= { accX25PortParmEntry 12 }
accX25SvcLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of switched virtual circuits that
IP can use. The value must not exceed the total
number of logical channels available on this
trunk."
DEFVAL { 256 }
::= { accX25PortParmEntry 13 }
accX25OpenThresh OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Threshold (number of IP datagrams queued per circuit)
at which an additional virtual circuit will be
opened."
DEFVAL { 3 }
::= { accX25PortParmEntry 14 }
accX25SvcMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The minimum number of virtual circuits which IP
will leave available for first circuits
to other destinations"
DEFVAL { 0 }
::= { accX25PortParmEntry 15 }
accX25SvcDelay OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Delay (seconds) between opening of
successive virtual circuits to same destination."
DEFVAL { 5 }
::= { accX25PortParmEntry 16 }
accX25InitBackoff OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Initial backoff time (seconds) to delay before
next attempt to open an additional virtual circuit
to the same destination when an attempt to do so
has failed. "
DEFVAL { 15 }
::= { accX25PortParmEntry 17 }
accX25MaxBackoff OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum backoff time (seconds) to delay between
subsequent attempts to open additional virtual
circuits to the same destination. The actual
delay is varied exponentially from
accX25InitBackoff up to this value."
DEFVAL { 86400 }
::= { accX25PortParmEntry 18 }
accX25OurAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Our X25 address (put in outbound packets)"
DEFVAL { '0'h }
::= { accX25PortParmEntry 19 }
accX25PktStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccX25PktStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Per-port packet statistics for X.25 interfaces."
::= { accX25 4 }
AccX25PktStatEntry ::= SEQUENCE {
accX25PktIndex INTEGER,
accX25RcvDiags Counter,
accX25RcvRestartReqs Counter,
accX25RcvRestartConfs Counter,
accX25RcvCallReqs Counter,
accX25RcvCallAccs Counter,
accX25RcvClrReqs Counter,
accX25RcvClrConfs Counter,
accX25RcvResetReqs Counter,
accX25RcvResetConfs Counter,
accX25RcvInts Counter,
accX25RcvIntConfs Counter,
accX25RcvRRs Counter,
accX25RcvRNRs Counter,
accX25RcvDatas Counter,
accX25XmtDiags Counter,
accX25XmtRestartReqs Counter,
accX25XmtRestartConfs Counter,
accX25XmtCallReqs Counter,
accX25XmtCallAccs Counter,
accX25XmtClrReqs Counter,
accX25XmtClrConfs Counter,
accX25XmtResetReqs Counter,
accX25XmtResetConfs Counter,
accX25XmtInts Counter,
accX25XmtIntConfs Counter,
accX25XmtRRs Counter,
accX25XmtRNRs Counter,
accX25XmtDatas Counter
}
accX25PktStatEntry OBJECT-TYPE
SYNTAX AccX25PktStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" X.25 packet level statistics for an X.25 interface."
INDEX { ifIndex }
::= { accX25PktStatTable 1 }
accX25PktIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Port number of this X.25 interface."
::= { accX25PktStatEntry 1 }
accX25RcvDiags OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Diagnostic packets received on this port."
::= { accX25PktStatEntry 2 }
accX25RcvRestartReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Restart Request (Restart Indication)
packets received on this port."
::= { accX25PktStatEntry 3 }
accX25RcvRestartConfs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Restart Confirmation packets received
on this port."
::= { accX25PktStatEntry 4 }
accX25RcvCallReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Call Request (Incoming Call) packets
received on this port."
::= { accX25PktStatEntry 5 }
accX25RcvCallAccs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Call Accepted (Call Connected) packets
received on this port."
::= { accX25PktStatEntry 6 }
accX25RcvClrReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Clear Request (Clear Indication) packets
received on this port."
::= { accX25PktStatEntry 7 }
accX25RcvClrConfs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Clear Confirmation packets received on
this port."
::= { accX25PktStatEntry 8 }
accX25RcvResetReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Reset Request (Reset Indication) packets
received on this port."
::= { accX25PktStatEntry 9 }
accX25RcvResetConfs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Reset Confirmation packets received on
this port."
::= { accX25PktStatEntry 10 }
accX25RcvInts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Interrupt packets received on this port."
::= { accX25PktStatEntry 11 }
accX25RcvIntConfs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Interrupt Confirmation packets received
on this port."
::= { accX25PktStatEntry 12 }
accX25RcvRRs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RR [Receive Ready] packets received on
this port."
::= { accX25PktStatEntry 13 }
accX25RcvRNRs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RNR [Receive Not Ready] packets received
on this port."
::= { accX25PktStatEntry 14 }
accX25RcvDatas OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Data packets received on this port."
::= { accX25PktStatEntry 15 }
accX25XmtDiags OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Diagnostic packets transmitted on this
port."
::= { accX25PktStatEntry 16 }
accX25XmtRestartReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Restart Request (Restart Indication)
packets transmitted on this port."
::= { accX25PktStatEntry 17 }
accX25XmtRestartConfs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Restart Confirmation packets transmitted
on this port."
::= { accX25PktStatEntry 18 }
accX25XmtCallReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Call Request (Incoming Call) packets
transmitted on this port."
::= { accX25PktStatEntry 19 }
accX25XmtCallAccs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Call Accepted (Call Connected) packets
transmitted on this port."
::= { accX25PktStatEntry 20 }
accX25XmtClrReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Clear Request (Clear Indication) packets
transmitted on this port."
::= { accX25PktStatEntry 21 }
accX25XmtClrConfs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Clear Confirmation packets transmitted
on this port."
::= { accX25PktStatEntry 22 }
accX25XmtResetReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Reset Request (Reset Indication) packets
transmitted on this port."
::= { accX25PktStatEntry 23 }
accX25XmtResetConfs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Reset Confirmation packets transmitted
on this port."
::= { accX25PktStatEntry 24 }
accX25XmtInts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Interrupt packets transmitted on this
port."
::= { accX25PktStatEntry 25 }
accX25XmtIntConfs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Interrupt Confirmation packets
transmitted on this port."
::= { accX25PktStatEntry 26 }
accX25XmtRRs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RR [Receive Ready] packets transmitted
on this port."
::= { accX25PktStatEntry 27 }
accX25XmtRNRs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of RNR [Receive Not Ready] packets
transmitted on this port."
::= { accX25PktStatEntry 28 }
accX25XmtDatas OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Data packets transmitted on this port."
::= { accX25PktStatEntry 29 }
-- IP Filter Group
accIpFilter OBJECT IDENTIFIER ::= { accBRG 18 }
accIpSrcRouting OBJECT-TYPE
SYNTAX INTEGER {
on(1), --
off(2) -- Discard source-routed IP packets
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source Routing mode"
::= { accIpFilter 1 }
accIpFiltTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpFiltEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" List of IP filters
Entries added/deleted by management action.
Setting any object to NULL deletes the entry"
::= { accIpFilter 2 }
accIpFiltEntry OBJECT-TYPE
SYNTAX AccIpFiltEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Specific IP filter"
INDEX { accIpFiltDAddr,
accIpFiltDNetMask,
accIpFiltSAddr,
accIpFiltSNetMask,
accIpFiltParm,
accIpFiltDisp }
::= { accIpFiltTable 1 }
AccIpFiltEntry ::= SEQUENCE {
accIpFiltDAddr IpAddress,
accIpFiltDNetMask IpAddress,
accIpFiltSAddr IpAddress,
accIpFiltSNetMask IpAddress,
accIpFiltParm OCTET STRING,
accIpFiltDisp INTEGER
}
accIpFiltDAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination Address "
::= { accIpFiltEntry 1 }
accIpFiltDNetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination Network Mask"
::= { accIpFiltEntry 2 }
accIpFiltSAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source Address "
::= { accIpFiltEntry 3 }
accIpFiltSNetMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source Network Mask "
::= { accIpFiltEntry 4 }
accIpFiltParm OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Filter parameters;
Byte 0 is Operation 1
[0,1,2] = [None, !,=]
Bytes 1,2 is Protocol
Byte 3 is Operation 2
[0 = none
[1,2,3,4] = both [!, <, >, =]
[5,6,7,8] = destination [!, <, >, =]
[9,10,11,12] = source [!, <, >, =]
Bytes 4,5 is UDP/TCP port number"
::= { accIpFiltEntry 5 }
accIpFiltDisp OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Disposition of packets meeting the
filter criteria. Packets not discarded
will be output with the selected relative
transmission priority.
normalPriority(0),
discard(1),
lowPriority(2),
highPriority(3)
"
::= { accIpFiltEntry 6 }
-- DECnet Group
accDn OBJECT IDENTIFIER ::= { accBRG 19 }
accDnNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of DECNET circuits"
::= { accDn 1 }
accDnID OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Node ID; Least 10 bits identify the node,
six bits above that identify the area."
::= { accDn 2 }
accDnMaxNode OBJECT-TYPE
SYNTAX INTEGER (1..1023)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum node number permitted in the local area"
::= { accDn 3 }
accDnMaxArea OBJECT-TYPE
SYNTAX INTEGER (1..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum area number permitted"
::= { accDn 4 }
accDnMaxAdjRtr OBJECT-TYPE
SYNTAX INTEGER (1..64)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of adjacent routers "
::= { accDn 5 }
accDnMaxEndNode OBJECT-TYPE
SYNTAX INTEGER (1..1023)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of broadcast endnode adjacencies"
::= { accDn 6 }
accDnMaxLocHop OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of hops allowed within this area"
::= { accDn 7 }
accDnMaxLocCost OBJECT-TYPE
SYNTAX INTEGER (1..1022)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum cost allowed on a path within this area"
::= { accDn 8 }
accDnMaxVisit OBJECT-TYPE
SYNTAX INTEGER (1..63)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of node visits allowed for a packet"
::= { accDn 9 }
accDnMaxForHop OBJECT-TYPE
SYNTAX INTEGER (1..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of hops allowed to another area"
::= { accDn 10 }
accDnMaxForCost OBJECT-TYPE
SYNTAX INTEGER (1..1022)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum cost allowed on a path to another area"
::= { accDn 11 }
accDnBCT1 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Interval between retranmissions of routing
database updates on Broadcast Address"
::= { accDn 12 }
accDnT1 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Interval between retranmissions of routing
database updates non-broadcast"
::= { accDn 13 }
accDnMsgLev OBJECT-TYPE
SYNTAX INTEGER (1..7)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Message level for generation of trap messages
describing DECNET operational phenonomena
See Trap level for description"
::= { accDn 14 }
accDnNodeState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
level1(2),
level2(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Operational state of the node "
::= { accDn 15 }
accDnUnreachs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets dropped due to node unreachable"
::= { accDn 16 }
accDnVisitXcds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets dropped due to visits exceeded"
::= { accDn 17 }
accDnBadNodes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets dropped due to illegal node number"
::= { accDn 18 }
accDnPktOsizes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets dropped due to oversize packet"
::= { accDn 19 }
accDnFmtErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets dropped due to packet format error"
::= { accDn 20 }
accDnCktTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDnCktEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" DECnet circuit table
Entries are added/deleted via management action."
::= { accDn 21 }
accDnCktEntry OBJECT-TYPE
SYNTAX AccDnCktEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The instance of an entry is the circuit number.
Existing entries can be modified."
INDEX { accDnCktIndex }
::= { accDnCktTable 1 }
AccDnCktEntry ::= SEQUENCE {
accDnCktIndex INTEGER,
accDnCktStatus INTEGER,
accDnCktState INTEGER,
accDnCktCost INTEGER,
accDnMaxRtr INTEGER,
accDnHelloInt TimeTicks,
accDnRtrPriority INTEGER,
accDnDesRtrId INTEGER,
accDnDesRtrPrio INTEGER,
accDnTrnPktRecs Counter,
accDnTrnPktSnds Counter,
accDnEndNodePktRecs Counter,
accDnEndNodePktSnds Counter,
accDnCktDowns Counter,
accDnCktType INTEGER,
accDnCktPort INTEGER,
accDnX25InOutAddr OCTET STRING,
accDnX25InAddr OCTET STRING,
accDnX25Idle TimeTicks,
accDnX25PktVal INTEGER,
accDnX25PktWin INTEGER,
accDnEntryStatus INTEGER
}
accDnCktIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Circuit number "
::= { accDnCktEntry 1 }
accDnCktStatus OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Administrative DECNET state of this circuit"
DEFVAL { off }
::= { accDnCktEntry 2 }
accDnCktState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2),
shut(3),
start(4),
test(5)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Operational DECNET state of this circuit"
::= { accDnCktEntry 3 }
accDnCktCost OBJECT-TYPE
SYNTAX INTEGER (1..1022)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Administrative circuit cost
Object will be set to a circuit-type
dependent value if not present
in entry-adding SET PDU."
::= { accDnCktEntry 4 }
accDnMaxRtr OBJECT-TYPE
SYNTAX INTEGER (1..32)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of routers that can be
communicated with over this circuit"
DEFVAL { 4 }
::= { accDnCktEntry 5 }
accDnHelloInt OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Interval between transmission of Router Hello
messages to other DECNET routers on this circuit"
DEFVAL { 15 }
::= { accDnCktEntry 6 }
accDnRtrPriority OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Priority of this Decnet router to become
designated router on this circuit."
DEFVAL { 15 }
::= { accDnCktEntry 7 }
accDnDesRtrId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" ID of router which is designated router on
this circuit. Lower 10 bits is node number,
six bits above that are area number."
::= { accDnCktEntry 8 }
accDnDesRtrPrio OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Priority of router which is designated router on
this circuit. "
::= { accDnCktEntry 9 }
accDnTrnPktRecs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of transit packets received on
this circuit."
::= { accDnCktEntry 10 }
accDnTrnPktSnds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of transit packets sent on
this circuit."
::= { accDnCktEntry 11 }
accDnEndNodePktRecs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of end-node packets received on
this circuit."
::= { accDnCktEntry 12 }
accDnEndNodePktSnds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of end-node packets sent on
this circuit."
::= { accDnCktEntry 13 }
accDnCktDowns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of circuit down events noted on
this circuit."
::= { accDnCktEntry 14 }
accDnCktType OBJECT-TYPE
SYNTAX INTEGER {
enet(6),
trn(9),
lapb(16),
mlink(129),
x25(130),
fr(131)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Circuit type
Object required in entry-adding SET PDU."
::= { accDnCktEntry 15 }
accDnCktPort OBJECT-TYPE
SYNTAX INTEGER {
j1(1),
j2(2),
j3(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Physical port that this circuit is on
Object required in entry-adding SET PDU."
::= { accDnCktEntry 16 }
accDnX25InOutAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" X25 address for other end of circuit; we'll
send to this address and will accept packets from
this address for this circuit.
Object required in entry-adding SET PDU if
circuit type is X.25"
::= { accDnCktEntry 17 }
accDnX25InAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Packets from this address are accepted
on this circuit.
Object will be set to default value if not present
in entry-adding SET PDU."
::= { accDnCktEntry 18 }
accDnX25Idle OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum idle time before this circuit is
considered unused.
Object will be set to default value if not present
in entry-adding SET PDU."
::= { accDnCktEntry 19 }
accDnX25PktVal OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum X25 packet size
Object will be set to default value if not present
in entry-adding SET PDU."
::= { accDnCktEntry 20 }
accDnX25PktWin OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" X25 packet window
Object will be set to default value if not present
in entry-adding SET PDU."
::= { accDnCktEntry 21 }
accDnEntryStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Setting this object to invalid deletes entry"
::= { accDnCktEntry 22 }
accDnRtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDnRtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" DECnet routing table"
::= { accDn 22 }
accDnRtEntry OBJECT-TYPE
SYNTAX AccDnRtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Detail on specific route "
INDEX { accDnRtNode }
::= { accDnRtTable 1 }
AccDnRtEntry ::= SEQUENCE {
accDnRtNode INTEGER,
accDnRtHops INTEGER,
accDnRtCost INTEGER,
accDnRtCkt INTEGER,
accDnRtNextHop INTEGER
}
accDnRtNode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Destination node"
::= { accDnRtEntry 1 }
accDnRtHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of hops to destination"
::= { accDnRtEntry 2 }
accDnRtCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Cost to destination"
::= { accDnRtEntry 3 }
accDnRtCkt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Circuit number to use to get to destination"
::= { accDnRtEntry 4 }
accDnRtNextHop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Next router along the way to destination"
::= { accDnRtEntry 5 }
accDnAreaTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDnAreaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" DECnet area table."
::= { accDn 23 }
accDnAreaEntry OBJECT-TYPE
SYNTAX AccDnAreaEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Details on specific area "
INDEX { accDnAreaArea }
::= { accDnAreaTable 1 }
AccDnAreaEntry ::= SEQUENCE {
accDnAreaArea INTEGER,
accDnAreaHops INTEGER,
accDnAreaCost INTEGER,
accDnAreaCkt INTEGER,
accDnAreaNextHop INTEGER
}
accDnAreaArea OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Remote area"
::= { accDnAreaEntry 1 }
accDnAreaHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Hops to Remote area"
::= { accDnAreaEntry 2 }
accDnAreaCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Cost to Remote area"
::= { accDnAreaEntry 3 }
accDnAreaCkt OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Circuit over which remote area can be reached."
::= { accDnAreaEntry 4 }
accDnAreaNextHop OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Next hop to remote area."
::= { accDnAreaEntry 5 }
-- DECNET IV Route Filters are used to suppress acceptance of
-- advertisements of level 1 and level 2 routes.
accDnRouteFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDnRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The DECNET IV Routes that the Network Manager wants to
be careful about."
::= { accDn 24 }
accDnRouteFilterEntry OBJECT-TYPE
SYNTAX AccDnRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single controlled DECNET Route."
INDEX { accDnRouteFilterAdj, accDnRouteFilterNode }
::= { accDnRouteFilterTable 1 }
AccDnRouteFilterEntry ::=
SEQUENCE {
accDnRouteFilterAdj
INTEGER,
accDnRouteFilterNode
INTEGER,
accDnRouteFilterDisposition
INTEGER,
accDnRouteFilterEntStat
INTEGER
}
accDnRouteFilterAdj OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If 0, all adjacent systems.
If a DECNET Area with host id 0, all adjacent
systems in that area.
If a DECNET Host ID, that adjacent system."
::= { accDnRouteFilterEntry 1 }
accDnRouteFilterNode OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If 0, all routing information.
If a DECNET Area with Host ID 0, relevant level
2 routing information.
If a DECNET Host ID, level 1 routing informa-
tion for that host."
::= { accDnRouteFilterEntry 2 }
accDnRouteFilterDisposition OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable indicates what to do with the
indicated routing information. Where overlaps
occur ('accept no routing information from area
3.0 except from router 3.27'), the most specif-
ic match applies."
::= { accDnRouteFilterEntry 3 }
accDnRouteFilterEntStat OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" setting this variable to 'invalid' has the ef-
fect of invalidating it as of the next system
reset."
::= { accDnRouteFilterEntry 4 }
-- DECNET Forwarding Filter Table
-- DECNET Forwarding Filter indicates routes from source
-- to destination. Traffic on those routes is affected.
accDnForwardFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDnForwardFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The DECNET traffic that the Network Manager wants
selectively treated."
::= { accDn 25 }
accDnForwardFilterEntry OBJECT-TYPE
SYNTAX AccDnForwardFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single set of messages that the Network Manager
wants selectively treated."
INDEX { accDnForwardFilterDest,
accDnForwardFilterSource }
::= { accDnForwardFilterTable 1 }
AccDnForwardFilterEntry ::=
SEQUENCE {
accDnForwardFilterDest
INTEGER,
accDnForwardFilterSource
INTEGER,
accDnForwardFilterDisposition
INTEGER,
accDnForwardFilterEntStat
INTEGER
}
accDnForwardFilterDest OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If 0, all DECNET Addresses.
If an Area with Host Part 0, all traffic to
that Area.
If a DECNET Host ID, all traffic to that Host."
::= { accDnForwardFilterEntry 1 }
accDnForwardFilterSource OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If 0, all DECNET Traffic.
If an Area with Host Part 0, all traffic from
that Area.
If a DECNET Host ID, all traffic from that
Host."
::= { accDnForwardFilterEntry 2 }
accDnForwardFilterDisposition OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable indicates what is to be done
with traffic from accDnForwardFilterSource to
accDnForwardFilterDest. When overlaps occur
('discard all traffic from Area 4.0 to Anywhere
except traffic from Host 4.123'), the most
specific match applies.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accDnForwardFilterEntry 3 }
accDnForwardFilterEntStat OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" setting accDnForwardFilterEntStat to invalid
has the effect of removing the filter on the
next system reset."
::= { accDnForwardFilterEntry 4 }
-- DECNET Adjacent System Table
-- This table displays all systems maintaining current DECNET
-- adjacencies with the system being queried.
accDnAdjTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDnAdjEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The set of systems adjacent to this router."
::= { accDn 26 }
accDnAdjEntry OBJECT-TYPE
SYNTAX AccDnAdjEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" One of the systems adjacent to this router."
INDEX { accDnAdjNode }
::= { accDnAdjTable 1 }
AccDnAdjEntry ::=
SEQUENCE {
accDnAdjNode
INTEGER,
accDnAdjType
INTEGER,
accDnAdjCircuit
INTEGER,
accDnAdjState
INTEGER
}
accDnAdjNode OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Host Identifier of the adjacent node."
::= { accDnAdjEntry 1 }
accDnAdjType OBJECT-TYPE
SYNTAX INTEGER {
level2Only(1),
level2(2),
level1(3),
endNode(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The type of DECNET adjacency being sustained."
::= { accDnAdjEntry 2 }
accDnAdjCircuit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The DECNET Circuit Number."
::= { accDnAdjEntry 3 }
accDnAdjState OBJECT-TYPE
SYNTAX INTEGER {
up(1),
initializing(2),
circuitFailed(3),
timedOut(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The state of the adjacency."
::= { accDnAdjEntry 4 }
-- Frame Relay Group
-- Frame Relay addresses (Data Link Connection Identifiers, or DLCIs) are
-- represented as octet strings of length 2.
accFr OBJECT IDENTIFIER ::= { accBRG 20 }
accFrAtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccFrAtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Internet address translation table for Frame
Relay interfaces.
Entries are added/deleted via management action."
::= { accFr 1 }
accFrAtEntry OBJECT-TYPE
SYNTAX AccFrAtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Internet address translation entry for Frame Relay
interfaces."
INDEX { accFrAtIfIndex,
accFrIpAddress }
::= { accFrAtTable 1 }
AccFrAtEntry ::= SEQUENCE {
accFrAtIfIndex INTEGER,
accFrIpAddress IpAddress,
accFrDLCI INTEGER,
accFrStatus INTEGER
}
accFrAtIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Interface number (ifIndex) for which this
translation entry is valid.
Object required in entry-adding SET PDU."
::= { accFrAtEntry 1 }
accFrIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IP Address
Object required in entry-adding SET PDU."
::= { accFrAtEntry 2 }
accFrDLCI OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Frame Relay DLCI to use for the specified host
Object required in entry-adding SET PDU."
::= { accFrAtEntry 3 }
accFrStatus OBJECT-TYPE
SYNTAX INTEGER {
permanent(1), -- Manually added
dynamic(2), -- Learned by Inverse ARP
confirm-pending(3), -- Learning
not-connected(4) -- Manually entered, but
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Status of this entry
Object required in entry-adding SET PDU."
::= { accFrAtEntry 4 }
accFrStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccFrStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Per-line statistics for Frame Relay interfaces"
::= { accFr 2 }
AccFrStatEntry ::= SEQUENCE {
accFrIndex INTEGER,
accFrStatRcvDrops Counter,
accFrStatShorts Counter,
accFrStatIllDlcis Counter,
accFrStatUnkDlcis Counter,
accFrStatUnkProtos Counter,
accFrStatRsrvDlcis Counter,
accFrStatXmtDrops Counter,
accFrStatErrTime TimeTicks,
accFrStatErrType INTEGER,
accFrStatErrDlci INTEGER,
accFrStatErrProto INTEGER,
accFrLinkState INTEGER,
accFrStatUnks Counter,
accFrStatRcvLongs Counter,
accFrStatIlgDlcis Counter,
accFrStatProtoErrs Counter,
accFrStatUnkIes Counter,
accFrStatSeqErrs Counter,
accFrStatUnkRpts Counter
}
accFrStatEntry OBJECT-TYPE
SYNTAX AccFrStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Frame Relay statistics"
INDEX { ifIndex }
::= { accFrStatTable 1 }
accFrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Physical Port number of this Frame Relay interface."
::= { accFrStatEntry 1 }
accFrStatRcvDrops OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of received frames that were discarded due
to lack of resources."
::= { accFrStatEntry 2 }
accFrStatShorts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of received frames that were discarded
because they were too short (DLCI and/or
protocol field missing)."
::= { accFrStatEntry 3 }
accFrStatIllDlcis OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of received frames that were discarded
because the DLCI was badly formed."
::= { accFrStatEntry 4 }
accFrStatUnkDlcis OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of received frames that were discarded
because the DLCI did not match any configured
value."
::= { accFrStatEntry 5 }
accFrStatUnkProtos OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of received frames that were discarded
because the protocol field did not match any
protocol configured for the specified DLCI."
::= { accFrStatEntry 6 }
accFrStatRsrvDlcis OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of received frames whose DLCI had the
reserved bit set. (The frame was not discarded;
the frame was processed as though the reserved
bit were clear)."
::= { accFrStatEntry 7 }
accFrStatXmtDrops OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of frames that could not be transmitted
due to lack of resources."
::= { accFrStatEntry 8 }
accFrStatErrTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" System uptime when the last Frame Relay error was
detected."
::= { accFrStatEntry 9 }
accFrStatErrType OBJECT-TYPE
SYNTAX INTEGER {
rcvDrop(1),
short(2),
illDlci(3),
unkDlci(4),
unkProto(5),
rsrvDlci(6),
xmtDrop(7),
unknownError(8),
receiveLong(9),
illegalDLCI(10),
dlcmiProtoErr(11),
dlcmiUnknownIE(12),
dlcmiSequenceErr(13),
dlcmiUnknownRpt(14)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Type of last detected Frame Relay error."
::= { accFrStatEntry 10 }
accFrStatErrDlci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Value of DLCI field from last detected Frame Relay
error (00 00 if no DLCI was associated with the
last error)."
::= { accFrStatEntry 11 }
accFrStatErrProto OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Value of protocol field from last detected Frame
Relay error (0 if no protocol field was associated
with the last error)."
::= { accFrStatEntry 12 }
accFrLinkState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
up(2),
idle(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" State of this Frame Relay link"
::= { accFrStatEntry 13 }
accFrStatUnks OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Unused object"
::= { accFrStatEntry 14 }
accFrStatRcvLongs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of received dlcmi frames longer than expected."
::= { accFrStatEntry 15 }
accFrStatIlgDlcis OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Unused object"
::= { accFrStatEntry 16 }
accFrStatProtoErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of received frames with a protocol violation."
::= { accFrStatEntry 17 }
accFrStatUnkIes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of dlcmi frames received with an
unknown Information element."
::= { accFrStatEntry 18 }
accFrStatSeqErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of dlcmi frames received with a
sequence error."
::= { accFrStatEntry 19 }
accFrStatUnkRpts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Unused object"
::= { accFrStatEntry 20 }
accFrParmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccFrParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Frame Relay parameter table"
::= { accFr 3 }
accFrParmEntry OBJECT-TYPE
SYNTAX AccFrParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Frame Relay parameter entry"
INDEX { accFrParmIndex }
::= { accFrParmTable 1 }
AccFrParmEntry ::= SEQUENCE {
accFrParmIndex INTEGER,
accFrParmAddrFmt INTEGER,
accFrParmAddrLen INTEGER,
accFrParmEncap INTEGER,
accFrDlcmiState INTEGER,
accFrDlcmiPollInt INTEGER,
accFrDlcmiFullStatEnq INTEGER,
accFrDlcmiErrThres INTEGER,
accFrDlcmiMonEvents INTEGER,
accFrDlcmiType INTEGER,
accFrDlcmiIdleTimer INTEGER
}
accFrParmIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Interface number"
::= { accFrParmEntry 1 }
accFrParmAddrFmt OBJECT-TYPE
SYNTAX INTEGER {
q921(1),
draft-q922(2),
q922(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Addressing format used.
Q.921 per spec. Ignores length parameter
draft-Q922 per March, 1990 draft of Q.922
q922 per October, 1990 Q.922 specification"
::= { accFrParmEntry 2 }
accFrParmAddrLen OBJECT-TYPE
SYNTAX INTEGER (2..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Length of address on serial line"
::= { accFrParmEntry 3 }
accFrParmEncap OBJECT-TYPE
SYNTAX INTEGER {
early(1),
ietf(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Type of encapsulation used on serial line"
::= { accFrParmEntry 4 }
accFrDlcmiState OBJECT-TYPE
SYNTAX INTEGER {
off(1),
lmi(2),
annexd(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This variable states which Data Link Connection
Management scheme is active (and by implication,
what DLCI it uses) on the Frame Relay interface."
::= { accFrParmEntry 5 }
accFrDlcmiPollInt OBJECT-TYPE
SYNTAX INTEGER (5..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" the number of seconds between successive
status enquiry messages."
::= { accFrParmEntry 6 }
accFrDlcmiFullStatEnq OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of status enquiry intervals that pass
before issuance of a full status enquiry message."
::= { accFrParmEntry 7 }
accFrDlcmiErrThres OBJECT-TYPE
SYNTAX INTEGER (1..10)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of unanswered
Status Enquiries the equipmemt shall accept before
declaring the interface down."
::= { accFrParmEntry 8 }
accFrDlcmiMonEvents OBJECT-TYPE
SYNTAX INTEGER (5..30)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of responses to
FULL STATUS or LINK INTEGRITY VERIFICATION
messages missed before the device will mark the
interface down."
::= { accFrParmEntry 9 }
accFrDlcmiType OBJECT-TYPE
SYNTAX INTEGER {
user(1),
network(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Link Maintenance is assymmetrical, so
one end must be user, the other network.
Normally the bridge/router is user."
::= { accFrParmEntry 10 }
accFrDlcmiIdleTimer OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of minutes without receiving any
non-dlcmi frames before declaring the link idle.
Setting the timer to 0 will disable it."
::= { accFrParmEntry 11 }
accFrCktTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccFrCktEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Frame Relay circuit table"
::= { accFr 4 }
accFrCktEntry OBJECT-TYPE
SYNTAX AccFrCktEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Frame Relay circuit table entry"
INDEX { accFrCktIfIndex }
::= { accFrCktTable 1 }
AccFrCktEntry ::= SEQUENCE {
accFrCktIfIndex INTEGER,
accFrCktDlci INTEGER,
accFrCktState INTEGER,
accFrCktFECNrcvds Counter,
accFrCktBECNrcvds Counter,
accFrCktFrameXmts Counter,
accFrCktOctetXmts Counter,
accFrCktFrameRcvs Counter,
accFrCktOctetRcvs Counter,
accFrCktCreateTime TimeTicks,
accFrCktChangeTime TimeTicks,
accFfrCktLoop INTEGER
}
accFrCktIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Interface on which this circuit exists"
::= { accFrCktEntry 1 }
accFrCktDlci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Data Link Connection Identifier for this
circuit."
::= { accFrCktEntry 2 }
accFrCktState OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
active(2),
inactive(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Indicates whether the particular circuit is
operational."
::= { accFrCktEntry 3 }
accFrCktFECNrcvds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of frames received from the network in-
dicating forward congestion since the circuit
was created. "
::= { accFrCktEntry 4 }
accFrCktBECNrcvds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of frames received from the network in-
dicating backward congestion since the circuit
was created. "
::= { accFrCktEntry 5 }
accFrCktFrameXmts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of frames sent from this circuit
since it was created. "
::= { accFrCktEntry 6 }
accFrCktOctetXmts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of octets sent from this circuit
since it was created. "
::= { accFrCktEntry 7 }
accFrCktFrameRcvs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of frames received by this circuit
since it was created. "
::= { accFrCktEntry 8 }
accFrCktOctetRcvs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of octets received by this circuit
since it was created. "
::= { accFrCktEntry 9 }
accFrCktCreateTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The value of sysUpTime when the circuit was
created."
::= { accFrCktEntry 10 }
accFrCktChangeTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The value of sysUpTime when last there was a
change in the circuit state."
::= { accFrCktEntry 11 }
accFfrCktLoop OBJECT-TYPE
SYNTAX INTEGER {
normal (1),
loop (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Indicates the loopback state of the virtual circuit.
The object is normally 'normal', indicating that the
circuit is in its normal operational state. If set
to 'loop', any messages received on the circuit will
be returned unmodified and the circuit will always be
viewed as 'down' by higher layer protocols.
The state of any circuit reverts to 'normal' after
a reset."
::= { accFrCktEntry 12 }
-- XNS Group
accXns OBJECT IDENTIFIER ::= { accBRG 21 }
accXnsParms OBJECT IDENTIFIER ::= { accXns 1 }
accXnsAdStat OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Administrative status of XNS routing protocol"
::= { accXnsParms 1 }
accXnsCkSum OBJECT-TYPE
SYNTAX INTEGER {
off(1),
packet(2),
header(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Checksumming of XNS protocol"
::= { accXnsParms 2 }
accXnsSpltHorz OBJECT-TYPE
SYNTAX INTEGER {
off(1),
simple(2),
poison(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Split horizon mode of XNS protocol"
::= { accXnsParms 3 }
accXnsAllNets OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" All nets mode"
::= { accXnsParms 4 }
accXnsMode OBJECT-TYPE
SYNTAX INTEGER {
xns(1),
ub(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" RIP protocol type to use"
::= { accXnsParms 5 }
accXnsNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccXnsNetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" List of XNS Networks.
Entries added/deleted by management action."
::= { accXns 2 }
accXnsNetEntry OBJECT-TYPE
SYNTAX AccXnsNetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Information on specific network"
INDEX { accXnsNetPort }
::= { accXnsNetTable 1 }
AccXnsNetEntry ::= SEQUENCE {
accXnsNetPort INTEGER,
accXnsNetNumber OCTET STRING,
accXnsNetType INTEGER,
accXnsNetEncap INTEGER,
accXnsNetSlot INTEGER,
accXnsNetAdStat INTEGER,
accXnsNetMtu INTEGER,
accXnsNetUpdate TimeTicks,
accXnsNetHops INTEGER,
accXnsNetCost INTEGER,
accXnsNetX25InOutAddr OCTET STRING,
accXnsNetX25InAddr OCTET STRING,
accXnsNetX25Idle TimeTicks,
accXnsNetX25PktVal INTEGER,
accXnsNetX25PktWin INTEGER,
accXnsNetEntryStat INTEGER,
accXnsNetUbUpdate TimeTicks,
accXnsNetUbTtl TimeTicks,
accXnsNetUbQT1 TimeTicks,
accXnsNetUbQT2 TimeTicks,
accXnsNetFncAddr OCTET STRING,
accXnsNetSrMode INTEGER
}
accXnsNetPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" XNS logical port number "
::= { accXnsNetEntry 1 }
accXnsNetNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" XNS network number "
::= { accXnsNetEntry 2 }
accXnsNetType OBJECT-TYPE
SYNTAX INTEGER {
enet(1),
token-ring(2),
lapb(3),
x25(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Type of network "
::= { accXnsNetEntry 3 }
accXnsNetEncap OBJECT-TYPE
SYNTAX INTEGER (0..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" LAN Encapsulation used (Ethernet).
none(0),
v2(1),
raw(2),
llc(3),
snap(4)
"
::= { accXnsNetEntry 4 }
accXnsNetSlot OBJECT-TYPE
SYNTAX INTEGER {
j1(1),
j2(2),
j3(3),
b1(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Slot to which the network is attached "
::= { accXnsNetEntry 5 }
accXnsNetAdStat OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Administrative status of network "
DEFVAL { on }
::= { accXnsNetEntry 6 }
accXnsNetMtu OBJECT-TYPE
SYNTAX INTEGER (576..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum packet size.
Object will be defaulted to a network type
dependent value if missing in set PDU which
adds entries."
::= { accXnsNetEntry 7 }
accXnsNetUpdate OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Update interval "
DEFVAL { 1500 }
::= { accXnsNetEntry 8 }
accXnsNetHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Hop count"
DEFVAL { 1 }
::= { accXnsNetEntry 9 }
accXnsNetCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Cost metric
Object will be defaulted to network type dependent
value if missing in set PDU which
adds entries."
::= { accXnsNetEntry 10 }
accXnsNetX25InOutAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" X25 address to send to and to receive packets from."
::= { accXnsNetEntry 11 }
accXnsNetX25InAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Receive-only X25 address
Object not required in set PDU (defaults to In/Out address)"
::= { accXnsNetEntry 12 }
accXnsNetX25Idle OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Time X25 connection can be idle before it is
determined to be not busy."
DEFVAL { 30000 }
::= { accXnsNetEntry 13 }
accXnsNetX25PktVal OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" X25 packet size
Object will be defaulted if missing in set PDU which
adds entries."
DEFVAL { 0 }
::= { accXnsNetEntry 14 }
accXnsNetX25PktWin OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" X25 packet window "
DEFVAL { 0 }
::= { accXnsNetEntry 15 }
accXnsNetEntryStat OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Status of this table entry
Set this object to invalid to remove entry from table"
DEFVAL { other }
::= { accXnsNetEntry 16 }
accXnsNetUbUpdate OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Ungermann-Bass update interval
Object will be defaulted if missing in set PDU which
adds entries."
::= { accXnsNetEntry 17 }
accXnsNetUbTtl OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Ungermann-Bass time-to-live
Object will be defaulted if missing in set PDU which
adds entries."
DEFVAL { 1500 }
::= { accXnsNetEntry 18 }
accXnsNetUbQT1 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Ungermann-Bass QT1 timer
Object will be defaulted to a network type
dependent value if missing in set PDU which
adds entries."
::= { accXnsNetEntry 19 }
accXnsNetUbQT2 OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Ungermann-Bass QT2 timer
Object will be defaulted to a network type
dependent value if missing in set PDU which
adds entries.
This object may be individually adjusted"
::= { accXnsNetEntry 20 }
accXnsNetFncAddr OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The MAC-layer functional address for sending and
receiving multicasts."
::= { accXnsNetEntry 21 }
accXnsNetSrMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
ape(2),
spe(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The source-routing mode for token-ring networks."
::= { accXnsNetEntry 22 }
accXnsRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccXnsRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" List of routes to other XNS networks"
::= { accXns 3 }
accXnsRouteEntry OBJECT-TYPE
SYNTAX AccXnsRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Information on route to destination network"
INDEX { accXnsRtDest }
::= { accXnsRouteTable 1 }
AccXnsRouteEntry ::= SEQUENCE {
accXnsRtDest OCTET STRING,
accXnsRtNxtNet OCTET STRING,
accXnsRtRouter OCTET STRING,
accXnsRtHops INTEGER,
accXnsRtCost INTEGER,
accXnsRtType INTEGER,
accXnsRtOwner INTEGER,
accXnsRtAge TimeTicks,
accXnsRtPort INTEGER
}
accXnsRtDest OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Destination network."
::= { accXnsRouteEntry 1 }
accXnsRtNxtNet OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The next network along the way
to the destination network."
::= { accXnsRouteEntry 2 }
accXnsRtRouter OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Router on next XNS network on route"
::= { accXnsRouteEntry 3 }
accXnsRtHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of hops to remote network"
::= { accXnsRouteEntry 4 }
accXnsRtCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Cost to remote network"
::= { accXnsRouteEntry 5 }
accXnsRtType OBJECT-TYPE
SYNTAX INTEGER {
public(1),
direct(2),
static(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Type of route"
::= { accXnsRouteEntry 6 }
accXnsRtOwner OBJECT-TYPE
SYNTAX INTEGER {
lli(1),
nms(2),
rip(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Source of route"
::= { accXnsRouteEntry 7 }
accXnsRtAge OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Age of route"
::= { accXnsRouteEntry 8 }
accXnsRtPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The logical port number through which packets will be
forwarded to the destination network."
::= { accXnsRouteEntry 9 }
accXnsRipStat OBJECT IDENTIFIER ::= { accXns 4 }
accXnsRipReqIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" XNS RIP requests received"
::= { accXnsRipStat 1 }
accXnsRipRespIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" XNS RIP responses received"
::= { accXnsRipStat 2 }
accXnsRipReqOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" XNS RIP requests transmitted"
::= { accXnsRipStat 3 }
accXnsRipRespOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" XNS RIP responses transmitted"
::= { accXnsRipStat 4 }
accXnsRipInErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" XNS RIP packets received with errors"
::= { accXnsRipStat 5 }
accXnsRipOutErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" XNS RIP responses transmitted with errors."
::= { accXnsRipStat 6 }
accXnsNodeStat OBJECT IDENTIFIER ::= { accXns 5 }
accXnsLocalIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets received for local usage"
::= { accXnsNodeStat 1 }
accXnsLocalOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Locally generated packets"
::= { accXnsNodeStat 2 }
accXnsNoSockets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets received for which there was no socket"
::= { accXnsNodeStat 3 }
accXnsNoRoutes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets for which no route was found"
::= { accXnsNodeStat 4 }
accXnsNodeInErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of input packets discarded by this node because
of some unspecified internal error."
::= { accXnsNodeStat 5 }
accXnsOutErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Output errors"
::= { accXnsNodeStat 6 }
accXnsAllNetsIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" All-nets packets received"
::= { accXnsNodeStat 7 }
accXnsAllNetsOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" All-nets packets transmitted"
::= { accXnsNodeStat 8 }
accXnsAllNetsErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Erroneous All-Nets packets encountered"
::= { accXnsNodeStat 9 }
accXnsPortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccXnsPortStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" XNS Port statistics table"
::= { accXns 6 }
accXnsPortStatEntry OBJECT-TYPE
SYNTAX AccXnsPortStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Per-port statistics"
INDEX { accXnsPortNumber }
::= { accXnsPortStatTable 1 }
AccXnsPortStatEntry ::= SEQUENCE {
accXnsPortNumber INTEGER,
accXnsPortTotalIns Counter,
accXnsPorFwdReqIns Counter,
accXnsPortNoFwdRts Counter,
accXnsPortTotalOuts Counter,
accXnsPortHopCnts Counter,
accXnsPortNotForMes Counter,
accXnsPortFwdReqOuts Counter,
accXnsPortFwdErrs Counter,
accXnsPortInErrs Counter,
accXnsPortTooShorts Counter,
accXnsPortCkSums Counter,
accXnsPortTooLongs Counter,
accXnsPortOutErrs Counter,
accXnsPortOpState INTEGER
}
accXnsPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Port number"
::= { accXnsPortStatEntry 1 }
accXnsPortTotalIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Total number of XNS Packets received"
::= { accXnsPortStatEntry 2 }
accXnsPorFwdReqIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of input packets not addressed to the receiving
port, as a result of which an attempt was made to find a
route to forward them to the final destination."
::= { accXnsPortStatEntry 3 }
accXnsPortNoFwdRts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port for which no
route to the destination network could be found."
::= { accXnsPortStatEntry 4 }
accXnsPortTotalOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Total XNS packets transmitted"
::= { accXnsPortStatEntry 5 }
accXnsPortHopCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port whose hop
count had reached the maximum value."
::= { accXnsPortStatEntry 6 }
accXnsPortNotForMes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
addressed to another node on the same network."
::= { accXnsPortStatEntry 7 }
accXnsPortFwdReqOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
successfully forwarded to another port."
::= { accXnsPortStatEntry 8 }
accXnsPortFwdErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which could
not be forwarded, either because there were transmitted
via a MAC-layer broadcast, or because their source or
destination network number were unknown."
::= { accXnsPortStatEntry 9 }
accXnsPortInErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
discarded because of some unspecified internal error."
::= { accXnsPortStatEntry 10 }
accXnsPortTooShorts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
discarded because they were too short."
::= { accXnsPortStatEntry 11 }
accXnsPortCkSums OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" XNS packet checksum errors detected"
::= { accXnsPortStatEntry 12 }
accXnsPortTooLongs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
discarded because they were too long."
::= { accXnsPortStatEntry 13 }
accXnsPortOutErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" XNS packet output errors detected"
::= { accXnsPortStatEntry 14 }
accXnsPortOpState OBJECT-TYPE
SYNTAX INTEGER (0..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Operational status of this port.
off(0),
down(1),
start(2),
stop(3),
up(4)
"
::= { accXnsPortStatEntry 15 }
accXnsUbNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccXnsUbNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" XNS Neighbor table (Ungermann-Bass)"
::= { accXns 7 }
accXnsUbNbrEntry OBJECT-TYPE
SYNTAX AccXnsUbNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Information on specific neighbor."
INDEX { accXnsUbnRmtNet,
accXnsUbnLclNet,
accXnsUbnRouter }
::= { accXnsUbNbrTable 1 }
AccXnsUbNbrEntry ::= SEQUENCE {
accXnsUbnRmtNet OCTET STRING,
accXnsUbnLclNet OCTET STRING,
accXnsUbnRouter OCTET STRING,
accXnsUbnHops INTEGER,
accXnsUbnCost INTEGER,
accXnsUbnState INTEGER,
accXnsUbnTtl TimeTicks
}
accXnsUbnRmtNet OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Remote network"
::= { accXnsUbNbrEntry 1 }
accXnsUbnLclNet OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Local network"
::= { accXnsUbNbrEntry 2 }
accXnsUbnRouter OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Router"
::= { accXnsUbNbrEntry 3 }
accXnsUbnHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Hop count to neighbor"
::= { accXnsUbNbrEntry 4 }
accXnsUbnCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Cost to neighbor"
::= { accXnsUbNbrEntry 5 }
accXnsUbnState OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" State of neighbor.
local(0),
congested(1),
uncongested(2),
keepalive(3)
"
::= { accXnsUbNbrEntry 6 }
accXnsUbnTtl OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Time to live"
::= { accXnsUbNbrEntry 7 }
accXnsUbRip OBJECT IDENTIFIER ::= { accXns 8 }
accXnsUbRipRespIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B RIP Responses received"
::= { accXnsUbRip 1 }
accXnsUbRipHelloIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B RIP Hello packets received"
::= { accXnsUbRip 2 }
accXnsUbRipConHelIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B RIP (congested) Hello packets received"
::= { accXnsUbRip 3 }
accXnsUbRipUnConHelIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B RIP (uncongested) Hello packets received"
::= { accXnsUbRip 4 }
accXnsUbRipRedirIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B RIP redirect packets received"
::= { accXnsUbRip 5 }
accXnsUbRipRespOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B RIP responses transmitted"
::= { accXnsUbRip 6 }
accXnsUbRipHelloOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B hello packets transmitted"
::= { accXnsUbRip 7 }
accXnsUbRipConHelOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B (congested) hello packets transmitted"
::= { accXnsUbRip 8 }
accXnsUbRipUnConHelOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B (uncongested) hello packets transmitted"
::= { accXnsUbRip 9 }
accXnsUbRipRedirOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B redirect packets transmitted"
::= { accXnsUbRip 10 }
accXnsUbNoRoutes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B unreachable network"
::= { accXnsUbRip 11 }
accXnsUbInErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B total input errors"
::= { accXnsUbRip 12 }
accXnsUbOutErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" U-B total output errors"
::= { accXnsUbRip 13 }
accXnsRouteFilters OBJECT IDENTIFIER ::= { accXns 9 }
accXnsRteFltrDefaultAction OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action taken on route updates from unconfigured neighbors."
::= { accXnsRouteFilters 1 }
accXnsRteNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccXnsRteNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of Host Identifiers for Routing Neighbors."
::= { accXnsRouteFilters 2 }
accXnsRteNbrEntry OBJECT-TYPE
SYNTAX AccXnsRteNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The host identifier for an individual routing neighbor."
INDEX { accXnsRteNbrId }
::= { accXnsRteNbrTable 1 }
AccXnsRteNbrEntry ::=
SEQUENCE {
accXnsRteNbrId
OCTET STRING,
accXnsRteNbrAction
INTEGER,
accXnsRteNbrStatus
INTEGER
}
accXnsRteNbrId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Host Identifier of a potential routing neighbor."
::= { accXnsRteNbrEntry 1 }
accXnsRteNbrAction OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action to be taken on advertisements from this routing neighbor,
unless overridden by a route filter."
::= { accXnsRteNbrEntry 2 }
accXnsRteNbrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of deleting this routing neighbor
and making its associated route filters of no effect."
::= { accXnsRteNbrEntry 3 }
accXnsRteFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccXnsRteFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of special advertisements that a given neighbor might offer.
Route Advertisements defaults are overridden using this table"
::= { accXnsRouteFilters 3 }
accXnsRteFltrEntry OBJECT-TYPE
SYNTAX AccXnsRteFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single potential advertisement, with information
as to its disposition."
INDEX { accXnsRteFltrNeighbor,
accXnsRteFltrNetwork }
::= { accXnsRteFltrTable 1 }
AccXnsRteFltrEntry ::=
SEQUENCE {
accXnsRteFltrNeighbor
OCTET STRING,
accXnsRteFltrNetwork
OCTET STRING,
accXnsRteFltrAction
INTEGER,
accXnsRteFltrStatus
INTEGER
}
accXnsRteFltrNeighbor OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Host Identifier of the Routing Neighbor that might
offer this advertsiement."
::= { accXnsRteFltrEntry 1 }
accXnsRteFltrNetwork OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Network Number the neighbor might advertise."
::= { accXnsRteFltrEntry 2 }
accXnsRteFltrAction OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" What is to be done with such an advertisement."
::= { accXnsRteFltrEntry 3 }
accXnsRteFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of deleting this filter."
::= { accXnsRteFltrEntry 4 }
-- The Network Filter permits traffic to be prioritized based
-- on souce/destination networks and socket numbers and packet type.
accXnsNetworkFilters OBJECT IDENTIFIER ::= { accXns 10 }
accXnsNetFltrDefaultAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action taken on messages not matched.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accXnsNetworkFilters 1 }
-- The following network filter table is deprecated in
-- favor of the expanded table immediately subsequent
oldXnsNetFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF OldXnsNetFltrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
" A list of network pairs to specially act on."
::= { accXnsNetworkFilters 2 }
oldXnsNetFltrEntry OBJECT-TYPE
SYNTAX OldXnsNetFltrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
" A single Network Number pair to be matched."
INDEX { oldXnsNetFltrDestination,
oldXnsNetFltrSource }
::= { oldXnsNetFltrTable 1 }
OldXnsNetFltrEntry ::=
SEQUENCE {
oldXnsNetFltrDestination
OCTET STRING,
oldXnsNetFltrSource
OCTET STRING,
oldXnsNetFltrAction
INTEGER,
oldXnsNetFltrStatus
INTEGER
}
oldXnsNetFltrDestination OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS deprecated
DESCRIPTION
" The value to be found in the Destination Network
Field, or 0x00000000."
::= { oldXnsNetFltrEntry 1 }
oldXnsNetFltrSource OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS deprecated
DESCRIPTION
" The value to be found in the Source Network Field, or 0x00000000."
::= { oldXnsNetFltrEntry 2 }
oldXnsNetFltrAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS deprecated
DESCRIPTION
" The action to be taken on matching messages.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { oldXnsNetFltrEntry 3 }
oldXnsNetFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
" Writing 'invalid' has the effect of removing this filter entry."
::= { oldXnsNetFltrEntry 4 }
-- The Network Filter permits the remote network routing
-- routine to determine whether traffic from or to a
-- particular network/socket of a particular packet type
-- is to be prioritized.
-- A zero value in a field is a wildcard.
accXnsNetFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccXnsNetFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of network filters to specially act on."
::= { accXnsNetworkFilters 3 }
accXnsNetFltrEntry OBJECT-TYPE
SYNTAX AccXnsNetFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single Network filter to be matched."
INDEX { accXnsNetFltrDestination,
accXnsNetFltrSource,
accXnsNetFltrDestSkt,
accXnsNetFltrSrcSkt,
accXnsNetFltrPktType }
::= { accXnsNetFltrTable 1 }
AccXnsNetFltrEntry ::=
SEQUENCE {
accXnsNetFltrDestination
OCTET STRING,
accXnsNetFltrSource
OCTET STRING,
accXnsNetFltrAction
INTEGER,
accXnsNetFltrStatus
INTEGER,
accXnsNetFltrDestSkt
OCTET STRING,
accXnsNetFltrSrcSkt
OCTET STRING,
accXnsNetFltrPktType
INTEGER
}
accXnsNetFltrDestination OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value to be found in the Destination Network
Field, or 0x00000000."
::= { accXnsNetFltrEntry 1 }
accXnsNetFltrSource OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value to be found in the Source Network Field, or 0x00000000."
::= { accXnsNetFltrEntry 2 }
accXnsNetFltrAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action to be taken on matching messages.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accXnsNetFltrEntry 3 }
accXnsNetFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of removing this filter entry."
::= { accXnsNetFltrEntry 4 }
accXnsNetFltrDestSkt OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value to be found in the Destination Socket
Field, or 0x0000."
::= { accXnsNetFltrEntry 5 }
accXnsNetFltrSrcSkt OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value to be found in the Source Socket Field, or 0x0000."
::= { accXnsNetFltrEntry 6 }
accXnsNetFltrPktType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Packet type, or zero "
::= { accXnsNetFltrEntry 7 }
-- XNS Host Filters
-- The Host Filter indicates what is to be done with traffic
-- originated or destined locally.
--
-- The value 0x000000000000 is used to mean 'any host'
accXnsHostFilters OBJECT IDENTIFIER ::= { accXns 11 }
accXnsHostFltrDefaultAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action taken on hosts not listed.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accXnsHostFilters 1 }
-- XNS Local Host Table
-- The Local Host List indicates what is to be done with traffic
-- to or from local hosts
accXnsHostFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccXnsHostFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of XNS Hosts to be handled specially."
::= { accXnsHostFilters 2 }
accXnsHostFltrEntry OBJECT-TYPE
SYNTAX AccXnsHostFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single Host Identifier."
INDEX { accXnsHostFltrId,
accXnsHostFltrSocket,
accXnsHostFltrPepClient }
::= { accXnsHostFltrTable 1 }
AccXnsHostFltrEntry ::=
SEQUENCE {
accXnsHostFltrId
OCTET STRING,
accXnsHostFltrSocket
OCTET STRING,
accXnsHostFltrPepClient
OCTET STRING,
accXnsHostFltrAction
INTEGER,
accXnsHostFltrStatus
INTEGER
}
accXnsHostFltrId OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Host Identifier "
::= { accXnsHostFltrEntry 1 }
accXnsHostFltrSocket OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The affected socket number, or zero for 'any socket'."
::= { accXnsHostFltrEntry 2 }
accXnsHostFltrPepClient OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" On PEP traffic, the affected Client Type,
or zero for all IDP traffic."
::= { accXnsHostFltrEntry 3 }
accXnsHostFltrAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action to be taken on matching messages.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accXnsHostFltrEntry 4 }
accXnsHostFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of deleting the entry."
::= { accXnsHostFltrEntry 5 }
-- IPX Group
accIpx OBJECT IDENTIFIER ::= { accBRG 22 }
accIpxParms OBJECT IDENTIFIER ::= { accIpx 1 }
accIpxAdStat OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Administrative status of IPX routing protocol"
::= { accIpxParms 1 }
accIpxCkSum OBJECT-TYPE
SYNTAX INTEGER {
off(1),
packet(2),
header(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Checksumming of IPX protocol"
::= { accIpxParms 2 }
accIpxSpltHorz OBJECT-TYPE
SYNTAX INTEGER {
off(1),
simple(2),
poison(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Split horizon mode of IPX protocol"
::= { accIpxParms 3 }
accIpxAllNets OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" All nets mode"
::= { accIpxParms 4 }
accIpxMode OBJECT-TYPE
SYNTAX INTEGER {
ipx(1),
ub(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" RIP protocol type to use"
::= { accIpxParms 5 }
accIpxNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpxNetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" List of IPX Networks.
Entries are added/deleted via management action."
::= { accIpx 2 }
accIpxNetEntry OBJECT-TYPE
SYNTAX AccIpxNetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Information on specific network entry. "
INDEX { accIpxNetPort }
::= { accIpxNetTable 1 }
AccIpxNetEntry ::= SEQUENCE {
accIpxNetPort INTEGER,
accIpxNetNumber OCTET STRING,
accIpxNetType INTEGER,
accIpxNetEncap INTEGER,
accIpxNetSlot INTEGER,
accIpxNetAdStat INTEGER,
accIpxNetMtu INTEGER,
accIpxNetUpdate TimeTicks,
accIpxNetHops INTEGER,
accIpxNetCost INTEGER,
accIpxNetX25InOutAddr OCTET STRING,
accIpxNetX25InAddr OCTET STRING,
accIpxNetX25Idle TimeTicks,
accIpxNetX25PktVal INTEGER,
accIpxNetX25PktWin INTEGER,
accIpxNetEntryStat INTEGER,
accIpxNetFncAddr OCTET STRING,
accIpxNetSrMode INTEGER
}
accIpxNetPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IPX logical port number "
::= { accIpxNetEntry 1 }
accIpxNetNumber OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IPX network number "
::= { accIpxNetEntry 2 }
accIpxNetType OBJECT-TYPE
SYNTAX INTEGER {
enet(1),
token-ring(2),
lapb(3),
x25(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Type of network "
::= { accIpxNetEntry 3 }
accIpxNetEncap OBJECT-TYPE
SYNTAX INTEGER (0..4)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" LAN Encapsulation used for Ethernets.
none(0),
v2(1),
raw(2),
llc(3),
snap(4)
"
::= { accIpxNetEntry 4 }
accIpxNetSlot OBJECT-TYPE
SYNTAX INTEGER {
j1(1),
j2(2),
j3(3),
b1(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Slot to which the network is attached "
::= { accIpxNetEntry 5 }
accIpxNetAdStat OBJECT-TYPE
SYNTAX INTEGER {
off(1),
on(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Administrative status of network
Object will be defaulted if missing in set PDU which
adds entries."
::= { accIpxNetEntry 6 }
accIpxNetMtu OBJECT-TYPE
SYNTAX INTEGER (576..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum packet size
Object will be defaulted if missing in set PDU which
adds entries."
::= { accIpxNetEntry 7 }
accIpxNetUpdate OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Update interval "
DEFVAL { 1500 }
::= { accIpxNetEntry 8 }
accIpxNetHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Hop count "
DEFVAL { 1 }
::= { accIpxNetEntry 9 }
accIpxNetCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Cost metric "
DEFVAL { 1 }
::= { accIpxNetEntry 10 }
accIpxNetX25InOutAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" X25 address to send to and to receive packets from.
Object required in set PDU adding X25-type circuit"
::= { accIpxNetEntry 11 }
accIpxNetX25InAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Receive-only X25 address
Object not required in set PDU (defaults to In/Out address)"
::= { accIpxNetEntry 12 }
accIpxNetX25Idle OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Time X25 connection can be idle before it is
determined to be not busy."
DEFVAL { 30000 }
::= { accIpxNetEntry 13 }
accIpxNetX25PktVal OBJECT-TYPE
SYNTAX INTEGER (0..1024)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" X25 packet size "
DEFVAL { 0 }
::= { accIpxNetEntry 14 }
accIpxNetX25PktWin OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" X25 packet window "
DEFVAL { 0 }
::= { accIpxNetEntry 15 }
accIpxNetEntryStat OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Status of this table entry
Set this object to invalid to delete entry."
DEFVAL { other }
::= { accIpxNetEntry 16 }
accIpxNetFncAddr OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The MAC-layer functional address for sending and
receiving multicasts."
::= { accIpxNetEntry 17 }
accIpxNetSrMode OBJECT-TYPE
SYNTAX INTEGER {
off(1),
ape(2),
spe(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The source-routing mode for token-ring networks."
::= { accIpxNetEntry 18 }
accIpxRtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpxRtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" List of routes to other IPX networks"
::= { accIpx 3 }
accIpxRtEntry OBJECT-TYPE
SYNTAX AccIpxRtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Information on route to destination network"
INDEX { accIpxRtDest }
::= { accIpxRtTable 1 }
AccIpxRtEntry ::= SEQUENCE {
accIpxRtDest OCTET STRING,
accIpxRtNxtNet OCTET STRING,
accIpxRtRouter OCTET STRING,
accIpxRtHops INTEGER,
accIpxRtCost INTEGER,
accIpxRtType INTEGER,
accIpxRtOwner INTEGER,
accIpxRtAge TimeTicks,
accIpxRtPort INTEGER
}
accIpxRtDest OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Destination network."
::= { accIpxRtEntry 1 }
accIpxRtNxtNet OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The next network along the way
to the destination network."
::= { accIpxRtEntry 2 }
accIpxRtRouter OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Router on next IPX network on route"
::= { accIpxRtEntry 3 }
accIpxRtHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of hops to remote network"
::= { accIpxRtEntry 4 }
accIpxRtCost OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Cost to remote network"
::= { accIpxRtEntry 5 }
accIpxRtType OBJECT-TYPE
SYNTAX INTEGER {
public(1),
direct(2),
static(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Type of route"
::= { accIpxRtEntry 6 }
accIpxRtOwner OBJECT-TYPE
SYNTAX INTEGER {
lli(1),
nms(2),
rip(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Source of route"
::= { accIpxRtEntry 7 }
accIpxRtAge OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Age of route"
::= { accIpxRtEntry 8 }
accIpxRtPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The logical port number through which packets will be
forwarded to the destination network."
::= { accIpxRtEntry 9 }
accIpxRipStat OBJECT IDENTIFIER ::= { accIpx 4 }
accIpxRipReqIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX RIP requests received"
::= { accIpxRipStat 1 }
accIpxRipRespIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX RIP responses received"
::= { accIpxRipStat 2 }
accIpxRipReqOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX RIP requests transmitted"
::= { accIpxRipStat 3 }
accIpxRipRespOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX RIP responses transmitted"
::= { accIpxRipStat 4 }
accIpxRipErrIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX RIP responses recevied with errors."
::= { accIpxRipStat 5 }
accIpxRipErrOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX RIP responses transmitted with errors."
::= { accIpxRipStat 6 }
accIpxNodeStat OBJECT IDENTIFIER ::= { accIpx 5 }
accIpxLocalIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets received for local usage"
::= { accIpxNodeStat 1 }
accIpxLocalOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Locally generated packets"
::= { accIpxNodeStat 2 }
accIpxNoSockets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets received for which there was no socket"
::= { accIpxNodeStat 3 }
accIpxNoRoutes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets for which no route was found"
::= { accIpxNodeStat 4 }
accIpxNodeInErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of input packets discarded by this node because
of some unspecified internal error."
::= { accIpxNodeStat 5 }
accIpxOutErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Output errors"
::= { accIpxNodeStat 6 }
accIpxAllNetsIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" All-nets packets received"
::= { accIpxNodeStat 7 }
accIpxAllNetsOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" All-nets packets transmitted"
::= { accIpxNodeStat 8 }
accIpxAllNetsErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Erroneous All-Nets packets encountered"
::= { accIpxNodeStat 9 }
accIpxPortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpxPortStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" IPX Port statistics table"
::= { accIpx 6 }
accIpxPortStatEntry OBJECT-TYPE
SYNTAX AccIpxPortStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Per-port statistics "
INDEX { accIpxPortNumber }
::= { accIpxPortStatTable 1 }
AccIpxPortStatEntry ::= SEQUENCE {
accIpxPortNumber INTEGER,
accIpxPortTotalIns Counter,
accIpxPorFwdReqIns Counter,
accIpxPortNoFwdRts Counter,
accIpxPortTotalOuts Counter,
accIpxPortHopCnts Counter,
accIpxPortNotForMes Counter,
accIpxPortFwdReqOuts Counter,
accIpxPortFwdErrs Counter,
accIpxPortInErrs Counter,
accIpxPortTooShorts Counter,
accIpxPortCkSums Counter,
accIpxPortTooLongs Counter,
accIpxPortOutErrs Counter,
accIpxPortOpState INTEGER
}
accIpxPortNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Port number"
::= { accIpxPortStatEntry 1 }
accIpxPortTotalIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Total number of IPX Packets received"
::= { accIpxPortStatEntry 2 }
accIpxPorFwdReqIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of input packets not addressed to the receiving
port, as a result of which an attempt was made to find a
route to forward them to the final destination."
::= { accIpxPortStatEntry 3 }
accIpxPortNoFwdRts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port for which no
route to the destination network could be found."
::= { accIpxPortStatEntry 4 }
accIpxPortTotalOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Total IPX packets transmitted"
::= { accIpxPortStatEntry 5 }
accIpxPortHopCnts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port whose hop
count had reached the maximum value."
::= { accIpxPortStatEntry 6 }
accIpxPortNotForMes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
addressed to another node on the same network."
::= { accIpxPortStatEntry 7 }
accIpxPortFwdReqOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
successfully forwarded to another port."
::= { accIpxPortStatEntry 8 }
accIpxPortFwdErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which could
not be forwarded, either because there were transmitted
via a MAC-layer broadcast, or because their source or
destination network number were unknown."
::= { accIpxPortStatEntry 9 }
accIpxPortInErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
discarded because of some unspecified internal error."
::= { accIpxPortStatEntry 10 }
accIpxPortTooShorts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
discarded because they were too short."
::= { accIpxPortStatEntry 11 }
accIpxPortCkSums OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX packet checksum errors detected"
::= { accIpxPortStatEntry 12 }
accIpxPortTooLongs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on this port which were
discarded because they were too long."
::= { accIpxPortStatEntry 13 }
accIpxPortOutErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX packet output errors detected"
::= { accIpxPortStatEntry 14 }
accIpxPortOpState OBJECT-TYPE
SYNTAX INTEGER (0..4)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Operational status of this port.
off(0),
down(1),
start(2),
stop(3),
up(4)
"
::= { accIpxPortStatEntry 15 }
accIpxSapStat OBJECT IDENTIFIER ::= { accIpx 7 }
accIpxSapReqIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX SAP requests received"
::= { accIpxSapStat 1 }
accIpxSapReqOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX SAP requests transmitted"
::= { accIpxSapStat 2 }
accIpxSapRespIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX SAP responses received"
::= { accIpxSapStat 3 }
accIpxSapRespOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX SAP responses transmitted"
::= { accIpxSapStat 4 }
accIpxSapGetNearIns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Get nearest requests received"
::= { accIpxSapStat 5 }
accIpxSapGetNearOuts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Get nearest requests transmitted"
::= { accIpxSapStat 6 }
accIpxSapNoRoutes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX SAP packets for unreachable net"
::= { accIpxSapStat 7 }
accIpxSapNotBests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" IPX SAP packet which we know there is a better route for"
::= { accIpxSapStat 8 }
accIpxSapNoServers OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" No server available"
::= { accIpxSapStat 9 }
accIpxSapInErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Bad IPX SAP packets received"
::= { accIpxSapStat 10 }
accIpxSapOutErrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Bad IPX SAP packets transmitted"
::= { accIpxSapStat 11 }
accIpxSrvTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpxSrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" IPX server table"
::= { accIpx 8 }
accIpxSrvEntry OBJECT-TYPE
SYNTAX AccIpxSrvEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Specific IPX server information"
INDEX { accIpxSrvType,
accIpxSrvName }
::= { accIpxSrvTable 1 }
AccIpxSrvEntry ::= SEQUENCE {
accIpxSrvName OCTET STRING,
accIpxSrvType OCTET STRING,
accIpxSrvHost OCTET STRING,
accIpxSrvHops INTEGER,
accIpxSrvOwner INTEGER,
accIpxSrvAge TimeTicks
}
accIpxSrvName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Name of server"
::= { accIpxSrvEntry 1 }
accIpxSrvType OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Type of server"
::= { accIpxSrvEntry 2 }
accIpxSrvHost OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Host"
::= { accIpxSrvEntry 3 }
accIpxSrvHops OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Hop counter"
::= { accIpxSrvEntry 4 }
accIpxSrvOwner OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Source of route"
::= { accIpxSrvEntry 5 }
accIpxSrvAge OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Age of route"
::= { accIpxSrvEntry 6 }
accIpxRouteFilters OBJECT IDENTIFIER ::= { accIpx 9 }
accIpxRteFltrDefaultAction OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action taken on route updates from unconfigured neighbors."
::= { accIpxRouteFilters 1 }
accIpxRteNbrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpxRteNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of Host Identifiers for Routing Neighbors."
::= { accIpxRouteFilters 2 }
accIpxRteNbrEntry OBJECT-TYPE
SYNTAX AccIpxRteNbrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The host identifier for an individual routing neighbor."
INDEX { accIpxRteNbrId }
::= { accIpxRteNbrTable 1 }
AccIpxRteNbrEntry ::=
SEQUENCE {
accIpxRteNbrId
OCTET STRING,
accIpxRteNbrAction
INTEGER,
accIpxRteNbrStatus
INTEGER
}
accIpxRteNbrId OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Host Identifier of a potential routing neighbor."
::= { accIpxRteNbrEntry 1 }
accIpxRteNbrAction OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action to be taken on advertisements from this routing neighbor,
unless overridden by a route filter."
::= { accIpxRteNbrEntry 2 }
accIpxRteNbrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of deleting this routing neighbor
and making its associated route filters of no effect."
::= { accIpxRteNbrEntry 3 }
accIpxRteFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpxRteFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of special advertisements that a given neighbor might offer.
Route Advertisements defaults are overridden using this table"
::= { accIpxRouteFilters 3 }
accIpxRteFltrEntry OBJECT-TYPE
SYNTAX AccIpxRteFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single potential advertisement, with information
as to its disposition."
INDEX { accIpxRteFltrNeighbor,
accIpxRteFltrNetwork }
::= { accIpxRteFltrTable 1 }
AccIpxRteFltrEntry ::=
SEQUENCE {
accIpxRteFltrNeighbor
OCTET STRING,
accIpxRteFltrNetwork
OCTET STRING,
accIpxRteFltrAction
INTEGER,
accIpxRteFltrStatus
INTEGER
}
accIpxRteFltrNeighbor OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Host Identifier of the Routing Neighbor that might
offer this advertsiement."
::= { accIpxRteFltrEntry 1 }
accIpxRteFltrNetwork OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Network Number the neighbor might advertise."
::= { accIpxRteFltrEntry 2 }
accIpxRteFltrAction OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" What is to be done with such an advertisement."
::= { accIpxRteFltrEntry 3 }
accIpxRteFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of deleting this filter."
::= { accIpxRteFltrEntry 4 }
accIpxNetworkFilters OBJECT IDENTIFIER ::= { accIpx 10 }
accIpxNetFltrDefaultAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action taken on messages not matched.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accIpxNetworkFilters 1 }
-- The following network filter table has been deprecated in
-- deference to the new table immediately subsequent.
oldIpxNetFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF OldIpxNetFltrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
" A list of network pairs to specially act on."
::= { accIpxNetworkFilters 2 }
oldIpxNetFltrEntry OBJECT-TYPE
SYNTAX OldIpxNetFltrEntry
ACCESS not-accessible
STATUS deprecated
DESCRIPTION
" A single Network Number pair to be matched."
INDEX { oldIpxNetFltrDestination,
oldIpxNetFltrSource }
::= { oldIpxNetFltrTable 1 }
OldIpxNetFltrEntry ::=
SEQUENCE {
oldIpxNetFltrDestination
OCTET STRING,
oldIpxNetFltrSource
OCTET STRING,
oldIpxNetFltrAction
INTEGER,
oldIpxNetFltrStatus
INTEGER
}
oldIpxNetFltrDestination OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS deprecated
DESCRIPTION
" The value to be found in the Destination Network Field, or 0x00000000."
::= { oldIpxNetFltrEntry 1 }
oldIpxNetFltrSource OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS deprecated
DESCRIPTION
" The value to be found in the Source Network Field, or 0x00000000."
::= { oldIpxNetFltrEntry 2 }
oldIpxNetFltrAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS deprecated
DESCRIPTION
" The action to be taken on matching messages.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { oldIpxNetFltrEntry 3 }
oldIpxNetFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS deprecated
DESCRIPTION
" Writing 'invalid' has the effect of removing this filter entry."
::= { oldIpxNetFltrEntry 4 }
-- The Network Filter permits the filtering of specific
-- traffic based on source and destination network,
-- source and destination socket, and packet type.
-- A value of zero in a field is a wildcard.
accIpxNetFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpxNetFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of network filters to specially act on."
::= { accIpxNetworkFilters 3 }
accIpxNetFltrEntry OBJECT-TYPE
SYNTAX AccIpxNetFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single Network filter to be matched."
INDEX { accIpxNetFltrDestination,
accIpxNetFltrSource,
accIpxNetFltrDestSkt,
accIpxNetFltrSrcSkt,
accIpxNetFltrPktType }
::= { accIpxNetFltrTable 1 }
AccIpxNetFltrEntry ::=
SEQUENCE {
accIpxNetFltrDestination
OCTET STRING,
accIpxNetFltrSource
OCTET STRING,
accIpxNetFltrAction
INTEGER,
accIpxNetFltrStatus
INTEGER,
accIpxNetFltrDestSkt
OCTET STRING,
accIpxNetFltrSrcSkt
OCTET STRING,
accIpxNetFltrPktType
INTEGER
}
accIpxNetFltrDestination OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value to be found in the Destination Network Field, or 0x00000000."
::= { accIpxNetFltrEntry 1 }
accIpxNetFltrSource OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (4))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value to be found in the Source Network Field, or 0x00000000."
::= { accIpxNetFltrEntry 2 }
accIpxNetFltrAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action to be taken on matching messages.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accIpxNetFltrEntry 3 }
accIpxNetFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of removing this filter entry."
::= { accIpxNetFltrEntry 4 }
accIpxNetFltrDestSkt OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value to be found in the Destination Socket field, or 0x0000."
::= { accIpxNetFltrEntry 5 }
accIpxNetFltrSrcSkt OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value to be found in the Source Socket Field, or 0x0000."
::= { accIpxNetFltrEntry 6 }
accIpxNetFltrPktType OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Packet type or zero"
::= { accIpxNetFltrEntry 7 }
-- IPX Host Filters
-- The Host Filter indicates what is to be done with traffic
-- originated or destined locally.
--
-- The value 0x000000000000 is used to mean 'any host'
accIpxHostFilters OBJECT IDENTIFIER ::= { accIpx 11 }
accIpxHostFltrDefaultAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action taken on hosts not listed.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accIpxHostFilters 1 }
-- IPX Local Host Table
-- The Local Host List indicates what is to be done with traffic
-- to or from local hosts
accIpxHostFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpxHostFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of IPX Hosts to be handled specially."
::= { accIpxHostFilters 2 }
accIpxHostFltrEntry OBJECT-TYPE
SYNTAX AccIpxHostFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single Host Identifier."
INDEX { accIpxHostFltrId,
accIpxHostFltrSocket,
accIpxHostFltrPepClient }
::= { accIpxHostFltrTable 1 }
AccIpxHostFltrEntry ::=
SEQUENCE {
accIpxHostFltrId
OCTET STRING,
accIpxHostFltrSocket
OCTET STRING,
accIpxHostFltrPepClient
OCTET STRING,
accIpxHostFltrAction
INTEGER,
accIpxHostFltrStatus
INTEGER
}
accIpxHostFltrId OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Host Identifier "
::= { accIpxHostFltrEntry 1 }
accIpxHostFltrSocket OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The affected socket number, or zero for 'any socket'."
::= { accIpxHostFltrEntry 2 }
accIpxHostFltrPepClient OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" On PEP traffic, the affected Client Type,
or zero for all IDP traffic."
::= { accIpxHostFltrEntry 3 }
accIpxHostFltrAction OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action to be taken on matching messages.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accIpxHostFltrEntry 4 }
accIpxHostFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of deleting the entry."
::= { accIpxHostFltrEntry 5 }
-- NetWare Service Advertising Protocol Filters
-- Service Advertisement Protocol Filter Entries indicate
-- what service names are or not to be advertised through the
-- network.
accIpxSapFilters OBJECT IDENTIFIER ::= { accIpx 12 }
accIpxSapFltrDefault OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The default behavior taken on locally originated (hop count <= 2)
Service Advertisements.
Remote advertisements must be identified individually."
::= { accIpxSapFilters 1 }
-- NetWare Service Advertising Protocol Filter Table
-- NetWare Service Names to include or exclude
-- from the SAP database
accIpxSapFltrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIpxSapFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of Service Names to be handled Specially."
::= { accIpxSapFilters 2 }
accIpxSapFltrEntry OBJECT-TYPE
SYNTAX AccIpxSapFltrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single Service name and its intended disposition."
INDEX { accIpxSapFltrSrvType,
accIpxSapFltrSrvName }
::= { accIpxSapFltrTable 1 }
AccIpxSapFltrEntry ::=
SEQUENCE {
accIpxSapFltrSrvType
OCTET STRING,
accIpxSapFltrSrvName
OCTET STRING,
accIpxSapFltrAction
INTEGER,
accIpxSapFltrStatus
INTEGER
}
accIpxSapFltrSrvType OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The Service Type of the affected SAP Entry.
Zero indicates all services."
::= { accIpxSapFltrEntry 1 }
accIpxSapFltrSrvName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The name of the affected service.
An Octet String of length zero indicates all services.
Name may be up to 48 octets"
::= { accIpxSapFltrEntry 2 }
accIpxSapFltrAction OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action to be taken upon a match."
::= { accIpxSapFltrEntry 3 }
accIpxSapFltrStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of removing the entry."
::= { accIpxSapFltrEntry 4 }
-- MultiPath IP Forwarding Table
ipMultiPathTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpMultiPathEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" This entity's IP Routing table."
::= { accBRG 23 }
ipMultiPathEntry OBJECT-TYPE
SYNTAX IpMultiPathEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A particular route to a particular destina-
tion, under a particular policy."
INDEX { ipMultiPathDest,
ipMultiPathPolicy,
ipMultiPathNextHop }
::= { ipMultiPathTable 1 }
IpMultiPathEntry ::=
SEQUENCE {
ipMultiPathDest
IpAddress,
ipMultiPathPolicy
INTEGER,
ipMultiPathIfIndex
INTEGER,
ipMultiPathMask
IpAddress,
ipMultiPathNextHop
IpAddress,
ipMultiPathMetric
INTEGER,
ipMultiPathType
INTEGER,
ipMultiPathProto
INTEGER,
ipMultiPathAge
INTEGER
}
ipMultiPathDest OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The destination IP address of this route. An
entry with a value of 0.0.0.0 is considered a
default route."
::= { ipMultiPathEntry 1 }
ipMultiPathPolicy OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" An instantiator for the relevant policy table. "
::= { ipMultiPathEntry 2 }
ipMultiPathIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The index value which uniquely identifies the
local interface through which the next hop of
this route should be reached. The interface
identified by a particular value of this index
is the same interface as identified by the same
value of ifIndex."
::= { ipMultiPathEntry 3 }
ipMultiPathMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Indicate the mask to be logical-ANDed with the
destination address before being compared to
the value in the ipMultiPathDest field. For
those systems that do not support arbitrary
subnet masks, an agent constructs the value of
the ipMultiPathMask by determining whether the
value of the correspondent ipMultiPathDest field
belong to a class-A, B, or C network, and then
using one of:
mask network
255.0.0.0 class-A
255.255.0.0 class-B
255.255.255.0 class-C
If the value of the ipMultiPathDest is 0.0.0.0(a
default route), then the mask value is also
0.0.0.0. It should be noted that all IP rout-
ing subsystems implicitly use this mechanism."
::= { ipMultiPathEntry 4 }
ipMultiPathNextHop OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The IP address of the next hop of this route.
(In the case of a route bound to an interface
which is realized via a broadcast media, the
value of this field is the agent's IP address
on that interface.)"
::= { ipMultiPathEntry 5 }
ipMultiPathMetric OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The primary routing metric for this route.
The semantics of this metric are determined by
the routing-protocol specified in the route's
ipMultiPathProto value."
::= { ipMultiPathEntry 6 }
ipMultiPathType OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- not specified by this MIB
invalid(2), -- logically deleted
direct(3), -- local interface
indirect(4) -- remote destination
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The type of route. Note that the values
direct(3) and indirect(4) refer to the notion
of direct and indirect routing in the IP archi-
tecture. Setting this object to the value in-
valid(2) has the effect of invalidating the
corresponding entry in the ipMultiPathTable ob-
ject. That is, it effectively dissasociates
the destination identified with said entry from
the route identified with said entry. It is an
implementation-specific matter as to whether
the agent removes an invalidated entry from the
table. Accordingly, management stations must
be prepared to receive tabular information from
agents that corresponds to entries not current-
ly in use. Proper interpretation of such en-
tries requires examination of the relevant ip-
ForwardType object."
::= { ipMultiPathEntry 7 }
ipMultiPathProto OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- not specified
local(2), -- local interface
netmgmt(3), -- static route
icmp(4), -- result of ICMP Redirect
-- the following are all dynamic
-- routing protocols
egp(5),
rip(8),
ospf(13)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The routing mechanism via which this route was
learned."
::= { ipMultiPathEntry 8 }
ipMultiPathAge OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The number of seconds since this route was
last updated or otherwise determined to be
correct. Note that no semantics of `too old'
can be implied except through knowledge of the
routing protocol by which the route was
learned."
::= { ipMultiPathEntry 9 }
-- Token Ring Group
accTr OBJECT IDENTIFIER ::= { accBRG 24 }
accTrNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of token-ring interfaces"
::= { accTr 1 }
accTrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccTrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Token Ring table"
::= { accTr 2 }
AccTrEntry ::= SEQUENCE {
accTrEarlyRelease INTEGER,
accTrMACAddr OCTET STRING,
accTrDefaultRingId INTEGER,
accTrActiveRingId INTEGER,
accTrRingSrvStatus INTEGER
}
accTrEntry OBJECT-TYPE
SYNTAX AccTrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Additional information about Token Ring
interfaces."
INDEX { ifIndex }
::= { accTrTable 1 }
accTrEarlyRelease OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If on, the device will pass the token
immediately after transmitting a frame,
rather than awaiting the message to transit
the ring."
DEFVAL { on }
::= { accTrEntry 2 }
accTrMACAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Locally-administered MAC address of this
interface. If zero, an algorithmically
determined address is used."
::= { accTrEntry 3 }
accTrDefaultRingId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Ring ID that interface will use if one is
not provided by a ring server."
::= { accTrEntry 4 }
accTrActiveRingId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" ID of ring that this interface
participates on"
::= { accTrEntry 5 }
accTrRingSrvStatus OBJECT-TYPE
SYNTAX INTEGER {
found(1),
not-found(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Indicates if a ring server was
found."
::= { accTrEntry 6 }
-- Source-Routing Bridge Group
accSr OBJECT IDENTIFIER ::= { accBRG 25 }
accSrBridge OBJECT IDENTIFIER ::= { accSr 1 }
accSrBridgeId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" ID of this bridge"
::= { accSrBridge 1 }
accSrVirRingId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Ring number used by bridges on a WAN"
::= { accSrBridge 2 }
accSrHopLimit OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" This bridge will discard a broadcast packet
which has transited this many bridges
en route."
::= { accSrBridge 3 }
accSrSingleRtBcast OBJECT-TYPE
SYNTAX INTEGER {
true(1),
false(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" If false, this bridge will not forward
single-route broadcast packets."
::= { accSrBridge 4 }
accSrNumPorts OBJECT-TYPE
SYNTAX INTEGER (2..16)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of physical ports of unit."
::= { accSrBridge 5 }
accSrRifTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { accSrBridge 6 }
accSrPortParmTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccSrPortParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" This table contains per-port parameters
for source-routed bridge ports."
::= { accSr 2 }
accSrPortParmEntry OBJECT-TYPE
SYNTAX AccSrPortParmEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Parameters for this bridge port"
INDEX { accSrParmsIndex }
::= { accSrPortParmTable 1 }
AccSrPortParmEntry ::= SEQUENCE {
accSrParmsIndex INTEGER,
accSrAdminStatus INTEGER,
accSrOperStatus INTEGER,
accSrPortProtocol INTEGER,
accSrPortLine INTEGER,
accSrPortFrDlci INTEGER,
accSrPortXBridgeStatus INTEGER
}
accSrParmsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Bridge port number"
::= { accSrPortParmEntry 1 }
accSrAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Administrative status of this
bridge port. If down, source-routing
bridging will not occur."
::= { accSrPortParmEntry 2 }
accSrOperStatus OBJECT-TYPE
SYNTAX INTEGER {
up(1),
down(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Operational (is) status of this
bridge port."
::= { accSrPortParmEntry 3 }
accSrPortProtocol OBJECT-TYPE
SYNTAX INTEGER {
enet(1),
x25(2),
lapb(3),
ffr(4)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Protocol"
::= { accSrPortParmEntry 4 }
accSrPortLine OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Index of physical port associated with this
Source-Routing port."
::= { accSrPortParmEntry 5 }
accSrPortFrDlci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Frame Relay DLCI for this port"
::= { accSrPortParmEntry 6 }
accSrPortXBridgeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Translation bridge status for this port."
::= { accSrPortParmEntry 7 }
accSrPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccSrPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Statistical information on bridge
ports."
::= { accSr 3 }
accSrPortStatsEntry OBJECT-TYPE
SYNTAX AccSrPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Statistics for a single bridge port"
INDEX { accStatsIndex }
::= { accSrPortStatsTable 1 }
AccSrPortStatsEntry ::= SEQUENCE {
accStatsIndex INTEGER,
accInBcastPkts Counter,
accInUcastPkts Counter,
accOutBcastPkts Counter,
accOutUcastPkts Counter,
accInSDSPkts Counter,
accInAPEPkts Counter,
accOutSDSPkts Counter,
accOutAPEPkts Counter,
accInDiscPkts Counter,
accOutDelayDiscPkts Counter,
accOutPrioDiscPkts Counter,
accInMcastPkts Counter,
accOutMcastPkts Counter
}
accStatsIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Bridge port number"
::= { accSrPortStatsEntry 1 }
accInBcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" All-stations broadcast packets received"
::= { accSrPortStatsEntry 2 }
accInUcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Unicast packets received"
::= { accSrPortStatsEntry 3 }
accOutBcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" All-stations broadcast packets transmitted"
::= { accSrPortStatsEntry 4 }
accOutUcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Non-unicast packets received"
::= { accSrPortStatsEntry 5 }
accInSDSPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Serial Discovery Sequence packets
received. These packets are a component
of a proprietary ACC protocol used when
a serial link is established between a
pair of ACC units."
::= { accSrPortStatsEntry 6 }
accInAPEPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" All-path explorer packets received"
::= { accSrPortStatsEntry 7 }
accOutSDSPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Serial Discovery Sequence packets transmitted."
::= { accSrPortStatsEntry 8 }
accOutAPEPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" All-Path Explorer Packets transmitted"
::= { accSrPortStatsEntry 9 }
accInDiscPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets discarded due to address
filtering."
::= { accSrPortStatsEntry 10 }
accOutDelayDiscPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets discarded because they were too
long on the output queue."
::= { accSrPortStatsEntry 11 }
accOutPrioDiscPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Packets discarded due to protocol
prioritization."
::= { accSrPortStatsEntry 12 }
accInMcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Multicast packets received."
::= { accSrPortStatsEntry 13 }
accOutMcastPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Multicast packets transmitted."
::= { accSrPortStatsEntry 14 }
accSrRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccSrRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Table of source-routing routes"
::= { accSr 4 }
accSrRouteEntry OBJECT-TYPE
SYNTAX AccSrRouteEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Information on a specific route"
INDEX { accSrRtDest }
::= { accSrRouteTable 1 }
AccSrRouteEntry ::= SEQUENCE {
accSrRtDest OCTET STRING,
accSrRtControl INTEGER,
accSrRtDesc OCTET STRING,
accSrRtIfIndex INTEGER
}
accSrRtDest OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (6))
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Destination for which route is intended"
::= { accSrRouteEntry 1 }
accSrRtControl OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Control bytes in routing field"
::= { accSrRouteEntry 2 }
accSrRtDesc OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Route description; sequence of
bridge and ring ID's."
::= { accSrRouteEntry 3 }
accSrRtIfIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accSrRouteEntry 4 }
accSrFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccSrFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Table of filters to permit forwarding
or dropping of frames on per-station-pair
basis
Records can be deleted by setting either
the source or destination to the NULL
type for the instance of interest."
::= { accSr 5 }
accSrFilterEntry OBJECT-TYPE
SYNTAX AccSrFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A specific filter"
INDEX { accSrFilterDest,
accSrFilterSrc }
::= { accSrFilterTable 1 }
AccSrFilterEntry ::= SEQUENCE {
accSrFilterDest OCTET STRING,
accSrFilterSrc OCTET STRING,
accSrFilterAction INTEGER
}
accSrFilterDest OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination MAC address of packet to
be filtered. Zero address matches all."
::= { accSrFilterEntry 1 }
accSrFilterSrc OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE (6))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source MAC address of packet to be filtered
Zero address matches all."
::= { accSrFilterEntry 2 }
accSrFilterAction OBJECT-TYPE
SYNTAX INTEGER {
forward(1),
drop(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Action to take packets satisfying filter
criteria. "
::= { accSrFilterEntry 3 }
accSrFpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccSrFpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of Forwarding Priority Entries.
Entries are added/deleted via management action."
::= { accSr 6 }
accSrFpEntry OBJECT-TYPE
SYNTAX AccSrFpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Relative Priority between frames to be forwarded
on a Bridge Port."
INDEX { accSrFpProt }
::= { accSrFpTable 1 }
AccSrFpEntry ::= SEQUENCE {
accSrFpIndex INTEGER,
accSrFpProt INTEGER,
accSrFpPrio INTEGER
}
accSrFpIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Port number"
::= { accSrFpEntry 1 }
accSrFpProt OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" protocol type
Set this object to NULL to delete the entry."
::= { accSrFpEntry 2 }
accSrFpPrio OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Relative forwarding priority assigned to protocol.
discard(0),
low(1),
normal(2),
high(3)
"
::= { accSrFpEntry 3 }
accSrFpDefaults OBJECT IDENTIFIER ::= { accSr 7 }
accSrFpPriDefault OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"
discard(0),
low(1),
normal(2),
high(3)
"
::= { accSrFpDefaults 1 }
accSrPortFRTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccSrPortFREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
::= { accSr 9 }
accSrPortFREntry OBJECT-TYPE
SYNTAX AccSrPortFREntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { accSrPortFRport }
::= { accSrPortFRTable 1 }
AccSrPortFREntry ::= SEQUENCE {
accSrPortFRport INTEGER,
accSrPortFRdlci INTEGER
}
accSrPortFRport OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accSrPortFREntry 1 }
accSrPortFRdlci OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { accSrPortFREntry 2 }
accSrPortX25Table OBJECT-TYPE
SYNTAX SEQUENCE OF AccSrPortX25Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
::= { accSr 10 }
accSrPortX25Entry OBJECT-TYPE
SYNTAX AccSrPortX25Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" "
INDEX { accSrPortX25port }
::= { accSrPortX25Table 1 }
AccSrPortX25Entry ::= SEQUENCE {
accSrPortX25port INTEGER,
accSrPortX25addr1 INTEGER,
accSrPortX25addr2 INTEGER,
accSrPortX25idleTime INTEGER,
accSrPortX25pktNegot INTEGER,
accSrPortX25windowNegot INTEGER
}
accSrPortX25port OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accSrPortX25Entry 1 }
accSrPortX25addr1 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { accSrPortX25Entry 2 }
accSrPortX25addr2 OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { accSrPortX25Entry 3 }
accSrPortX25idleTime OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { accSrPortX25Entry 4 }
accSrPortX25pktNegot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { accSrPortX25Entry 5 }
accSrPortX25windowNegot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { accSrPortX25Entry 6 }
-- SMDS Group
accSMDS OBJECT IDENTIFIER ::= { accBRG 26 }
SmdsAddress ::= OCTET STRING -- (SIZE (8))
-- the 60-bit SMDS address, preceded by 4 bits with the
-- following values:
-- "1100" when representing an individual address
-- "1110" when representing a group address
-- The SMDS Port group
accSmdsPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccSmdsPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains SMDS port parameters and
state variables, one entry per SMDS port."
::= { accSMDS 1 }
accSmdsPortEntry OBJECT-TYPE
SYNTAX AccSmdsPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This list contains SMDS port parameters and
state variables."
INDEX { accSmdsPortIndex }
::= { accSmdsPortTable 1 }
AccSmdsPortEntry ::= SEQUENCE {
accSmdsPortIndex
INTEGER,
accSmdsPortIA
SmdsAddress
}
accSmdsPortIndex OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object identifies the SIP
port interface for which this entry contains
management information. The value of this
object for a particular interface has the same
value as the ifIndex object, defined in RFC
1156 and RFC 1213, for the same interface."
::= { accSmdsPortEntry 1 }
accSmdsPortIA OBJECT-TYPE
SYNTAX SmdsAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The value of this object specifies the SNI
Individual address configured for this SIP
interface port."
::= { accSmdsPortEntry 2 }
-- The SIP Level 3 group
-- Implementation of the SIP Level 3 group is mandatory
-- for all systems implementing SIP Level 3.
accSipL3Table OBJECT-TYPE
SYNTAX SEQUENCE OF AccSipL3Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This table contains SIP L3 parameters and
state variables, one entry per SIP port."
::= { accSMDS 2 }
accSipL3Entry OBJECT-TYPE
SYNTAX AccSipL3Entry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"This list contains SIP L3 parameters and
state variables."
INDEX { accSipL3Index }
::= { accSipL3Table 1 }
AccSipL3Entry ::= SEQUENCE {
accSipL3Index
INTEGER,
accSipL3RcvIAs
Counter,
accSipL3RcvGAs
Counter,
accSipL3UnkIAs
Counter,
accSipL3UnkGAs
Counter,
accSipL3SndIAs
Counter,
accSipL3SndGAs
Counter,
accSipL3Errors
Counter,
accSipL3InvAddrs
Counter
}
accSipL3Index OBJECT-TYPE
SYNTAX INTEGER (1..65535)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of this object identifies the SIP
port interface for which this entry contains
management information. The value of this
object for a particular interface has the same
value as the ifIndex object, defined in RFC
1156 and RFC 1213, for the same interface."
::= { accSipL3Entry 1 }
accSipL3RcvIAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of individually addressed SIP
Level 3 PDUs received from the remote system
across the SNI. The total includes only
unerrored L3PDUs."
::= { accSipL3Entry 2 }
accSipL3RcvGAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of group addressed SIP Level 3
PDUs received from the remote system across the
SNI. The total includes only unerrored L3PDUs."
::= { accSipL3Entry 3 }
accSipL3UnkIAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of SIP Level 3 PDUs received from the
remote system with invalid or unknown individual
destination addresses (Destination Address
Screening violations are not included). See SMDS
Subscription MIB module."
::= { accSipL3Entry 4 }
accSipL3UnkGAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of SIP Level 3 PDUs received from the
remote system with invalid or unknown group
addresses. (Destination Address Screening
violations are not included). See SMDS
Subscription MIB module."
::= { accSipL3Entry 5 }
accSipL3SndIAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of individually addressed SIP Level 3
PDUs that have been sent by this system across the
SNI."
::= { accSipL3Entry 6 }
accSipL3SndGAs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of group addressed SIP L3PDUs that
have been sent by this system across the SNI."
::= { accSipL3Entry 7 }
-- The total number of SIP L3PDU errors can be calculated as
-- (Syntactic errors + Semantic Service errors )
-- Syntactic errors include:
-- accSipL3Errors
-- Latest occurrences of syntactic error types are logged in
-- accSipL3PDUErrorTable.
-- Semantic Service errors include:
-- accSipL3UnkIAs
-- accSipL3UnkGAs
-- accSipL3InvAddrs
-- Note that public networks supporting SMDS may discard
-- SIP L3PDUs due to subscription violations. Related
-- managed objects are defined in Definitions of Managed
-- Objects for SMDS Subscription.
accSipL3Errors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The total number of SIP Level 3 PDUs received
from the remote system that were discovered to
have errors (including protocol processing and bit
errors but excluding addressing-related errors)
and were discarded. Includes both group addressed
L3PDUs and L3PDUs containing an individual
destination address."
::= { accSipL3Entry 8 }
accSipL3InvAddrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of SIP Level 3 PDUs received from the
remote system that had the Source or Destination
Address_Type subfields, (the four most significant
bits of the 64 bit address field), not equal to
the value 1100 or 1110. Also, an error is
considered to have occurred if the Address_Type
field for a Source Address, the four most
significant bits of the 64 bits, is equal to 1110
(a group address)."
::= { accSipL3Entry 9 }
-- Remote Loader Group
accRload OBJECT IDENTIFIER ::= { accBRG 27 }
accRlSourceTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccRlSourceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Table of host/filenames for remote
loading of system application code.
To delete an entry, set the value of accRlPriority
to NULL for the desired instance.
Existing entries may be modified (overwritten)."
::= { accRload 1 }
accRlSourceEntry OBJECT-TYPE
SYNTAX AccRlSourceEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Specific host/filename information "
INDEX { accRlPriority }
::= { accRlSourceTable 1 }
AccRlSourceEntry ::= SEQUENCE {
accRlHostAddr IpAddress,
accRlFilename OCTET STRING,
accRlPriority INTEGER
}
accRlHostAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IP address of host which contains the
application file to be remote-loaded."
::= { accRlSourceEntry 1 }
accRlFilename OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" ASCII filename of application file to
be remote-loaded to unit."
::= { accRlSourceEntry 2 }
accRlPriority OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Priority of this entry. Attempts will be made
to download from host/filename with lowest
numerical value of priority first, then next
lowest, etc. Range is limited to number of
entries in the table."
::= { accRlSourceEntry 3 }
accNetload OBJECT-TYPE
SYNTAX INTEGER {
initiate(1),
other(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Setting this object to initiate causes the unit
to attempt to load application code into local
(execution) memory from a file in the accRlSourceTable.
This code will then be immediately executed."
::= { accRload 2 }
accDownload OBJECT-TYPE
SYNTAX INTEGER {
initiate(1),
other(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Setting this object to initiate causes the unit
to load local EPROM with application code
brought over the network from a file in the
accRlSourceTable."
::= { accRload 3 }
-- AppleTalk Group
accAt OBJECT IDENTIFIER ::= { accBRG 28 }
-- The AtNode Group
accAtNode OBJECT IDENTIFIER ::= { accAt 1 }
-- Configuration or operational parameters maintained
-- and reported on a per-node basis.
accAtNodeAdState OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The administrative state of the AppleTalk router. If
set to on(1), AppleTalk packets will be routed on ports
which have been administratively enabled. If set to
off(3), AppleTalk packets will be bridged."
::= { accAtNode 1 }
accAtNodeChecksum OBJECT-TYPE
SYNTAX INTEGER {
on(1),
off(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The AppleTalk checksum mode. If set to on(1), output
packets will be generated with the standard AppleTalk
checksum. If set to off(2), output packets will be
generated with a null checksum. Checksum verification
is performed on input if and only if a DDP checksum is
present."
::= { accAtNode 2 }
accAtNodeAarpExpire OBJECT-TYPE
SYNTAX TimeTicks -- (6000..1800000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The AARP database expiration interval. AARP database
entries which are not updated within this interval of
time are deleted from the database. The default value
is 360000 (1 hour)."
::= { accAtNode 3 }
-- The AtAarpTable Group
accAtAarpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtAarpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The AARP database containing AppleTalk protocol to
hardware address mappings. This view of the AARP
database differs from the standard view as seen from
the experimental branch of the MIB."
::= { accAt 2 }
accAtAarpEntry OBJECT-TYPE
SYNTAX AccAtAarpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An AARP database entry which maps a particular AppleTalk
protocol address into a MAC-layer hardware address. "
INDEX { accAtAarpTabPort,
accAtAarpTabNetAddr }
::= { accAtAarpTable 1 }
AccAtAarpEntry ::= SEQUENCE {
accAtAarpTabPort INTEGER,
accAtAarpTabMacAddr OCTET STRING,
accAtAarpTabNetAddr OCTET STRING,
accAtAarpTabStatus INTEGER
}
accAtAarpTabPort OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The logical port number of a directly-connected
AppleTalk network."
::= { accAtAarpEntry 1 }
accAtAarpTabMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The 48-bit Ethernet or Token Ring MAC-layer address
which corresponds to the AppleTalk network address."
::= { accAtAarpEntry 2 }
accAtAarpTabNetAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The 24-bit AppleTalk network address consisting of a
16-bit network number and 8-bit node id."
::= { accAtAarpEntry 3 }
accAtAarpTabStatus OBJECT-TYPE
SYNTAX INTEGER {
dynamic(1),
static(2),
pending(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The status of the entry. A status of dynamic(1)
indicates the entry can be deleted when the expiration
interval expires, a status of static(1) indicates the
entry contains the address of a local port, and a status
of pending(3) indicates the entry is not complete (i.e.,
the hardware or protocol address is unknown)."
::= { accAtAarpEntry 4 }
-- The AtAarpStatsTable Group
accAtAarpStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtAarpStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" AppleTalk Address Resolution Protocol (AARP) statistics
maintained and reported on a per-port basis."
::= { accAt 3 }
accAtAarpStatsEntry OBJECT-TYPE
SYNTAX AccAtAarpStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The AARP statistics for a particular logical port. If
the port is not connected to an AppleTalk network which
uses AARP, all statistics will be reported with a zero
value. "
INDEX { accAtPortTabIndex }
::= { accAtAarpStatsTable 1 }
AccAtAarpStatsEntry ::= SEQUENCE {
accAtAarpStatsInRequests Counter,
accAtAarpStatsInResponses Counter,
accAtAarpStatsInProbes Counter,
accAtAarpStatsOutRequests Counter,
accAtAarpStatsOutResponses Counter,
accAtAarpStatsOutProbes Counter,
accAtAarpStatsNoReplys Counter,
accAtAarpStatsExpires Counter,
accAtAarpStatsDiscards Counter,
accAtAarpStatsInErrors Counter,
accAtAarpStatsOutErrors Counter
}
accAtAarpStatsInRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AARP request packets received."
::= { accAtAarpStatsEntry 1 }
accAtAarpStatsInResponses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AARP response packets received."
::= { accAtAarpStatsEntry 2 }
accAtAarpStatsInProbes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AARP probe packets received."
::= { accAtAarpStatsEntry 3 }
accAtAarpStatsOutRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AARP request packets sent."
::= { accAtAarpStatsEntry 4 }
accAtAarpStatsOutResponses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AARP response packets sent."
::= { accAtAarpStatsEntry 5 }
accAtAarpStatsOutProbes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AARP probe packets sent."
::= { accAtAarpStatsEntry 6 }
accAtAarpStatsNoReplys OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times an AARP request packet and its
subsequent retransmissions received no response."
::= { accAtAarpStatsEntry 7 }
accAtAarpStatsExpires OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times an entry was deleted from the AARP
database because the expiration interval had expired."
::= { accAtAarpStatsEntry 8 }
accAtAarpStatsDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of queued output packets discarded because
of an unanswered AARP request."
::= { accAtAarpStatsEntry 9 }
accAtAarpStatsInErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AARP packets received which were invalid
or which could not be processed because of some internal
error."
::= { accAtAarpStatsEntry 10 }
accAtAarpStatsOutErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AARP packets which could not be sent
because of some internal error."
::= { accAtAarpStatsEntry 11 }
-- The AtAdbStats Group
accAtAdbStats OBJECT IDENTIFIER ::= { accAt 4 }
-- AARP database statistics maintained and reported on a
-- per-node basis.
accAtAdbStatsCacheds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times the desired database entry was the
first entry in the hash bucket (i.e., it had already
been rotated to the beginning of the list of entries
with the same hash value)."
::= { accAtAdbStats 1 }
accAtAdbStatsRotates OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times the desired database entry was not
the first entry in the hash bucket and had to be rotated
to the beginning of the list."
::= { accAtAdbStats 2 }
accAtAdbStatsNoEntries OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times the desired entry was not in the
AARP database."
::= { accAtAdbStats 3 }
accAtAdbStatsAdds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times a new entry was added to the AARP
database."
::= { accAtAdbStats 4 }
accAtAdbStatsUpdates OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times an existing entry was updated."
::= { accAtAdbStats 5 }
accAtAdbStatsDeletes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times an entry was deleted from the AARP
database."
::= { accAtAdbStats 6 }
accAtAdbStatsTrims OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times the AARP database was trimmed to
make room for a new entry."
::= { accAtAdbStats 7 }
accAtAdbStatsDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of queued output packets discarded because
the anchoring database entry was deleted."
::= { accAtAdbStats 8 }
-- The AtDdpStats Group
accAtDdpStats OBJECT IDENTIFIER ::= { accAt 5 }
-- Datagram Delivery Protocol (DDP) statistics maintained
-- and reported on a per-node basis. These statistics
-- supplement the standard DDP statistics defined in the
-- experimental branch of the MIB.
accAtDdpStatsNoOutRoutes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of output packets generated by local protocol
handlers for which there was not route to the destination
network."
::= { accAtDdpStats 1 }
accAtDdpStatsInErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received which could not be
delivered because of some internal error."
::= { accAtDdpStats 2 }
accAtDdpStatsOutErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets locally generated which could
not be sent because of some internal error."
::= { accAtDdpStats 3 }
-- The AtNetTable Group
accAtNetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtNetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" AppleTalk network configuration table stored in NVM."
::= { accAt 6 }
accAtNetEntry OBJECT-TYPE
SYNTAX AccAtNetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The information stored in NVM which defines an AppleTalk
network or half-router serial port. This information
supplements standard configuration parameters defined
in the experimental branch of the MIB. (was atportIndex)"
INDEX { ifIndex }
::= { accAtNetTable 1 }
AccAtNetEntry ::= SEQUENCE {
accAtNetTabProtocol INTEGER,
accAtNetTabRtmpIncr INTEGER,
accAtNetTabRtmpSend TimeTicks,
accAtNetTabX25Addr1 OCTET STRING,
accAtNetTabX25Addr2 OCTET STRING,
accAtNetTabX25Idle TimeTicks,
accAtNetTabX25PktSize INTEGER,
accAtNetTabX25WinSize INTEGER
}
accAtNetTabProtocol OBJECT-TYPE
SYNTAX INTEGER {
ethertalk1(1),
ethertalk2(2),
tokentalk(3),
lapb(4),
x25(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The type of data-link protocol used. These types
augment the standard definitions in the experimental
branch of the MIB and are used to maintain conformity
with ACC management commands. Setting this object
will cause all other objects associated with this
entry to be reset to their default values."
::= { accAtNetEntry 1 }
accAtNetTabRtmpIncr OBJECT-TYPE
SYNTAX INTEGER (1..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The RTMP hop-count increment to be applied to packets
forwarded via this port or routing tuples received
received on this port."
DEFVAL { 1 }
::= { accAtNetEntry 2 }
accAtNetTabRtmpSend OBJECT-TYPE
SYNTAX TimeTicks -- (1000..30000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The RTMP send interval for routing updates sent via
this port. The RTMP send interval may be
set to a higher value on serial ports to limit the
amount of bandwidth consumed by routing updates."
DEFVAL { 1000 }
::= { accAtNetEntry 3 }
accAtNetTabX25Addr1 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The normal DTE address to use for sending or receiving
packets via an X.25 virtual circuit."
::= { accAtNetEntry 4 }
accAtNetTabX25Addr2 OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" An alternate DTE address to use for receiving packets
via an X.25 virtual circuit."
::= { accAtNetEntry 5 }
accAtNetTabX25Idle OBJECT-TYPE
SYNTAX TimeTicks -- (6000..6480000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The interval which governs how long an X.25 circuit
can be idle before it is cleared. "
DEFVAL { 30000 }
::= { accAtNetEntry 6 }
accAtNetTabX25PktSize OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The desired packet size to be negotiated during X.25
call establishment.
pktsize1(0),
pktsize2(16),
pktsize3(32),
pktsize4(64),
pktsize5(128),
pktsize6(256),
pktsize7(512),
pktsize8(1024)
"
DEFVAL { 0 }
::= { accAtNetEntry 7 }
accAtNetTabX25WinSize OBJECT-TYPE
SYNTAX INTEGER (0..127)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The desired window size to be negotiated during X.25
call establishment."
DEFVAL { 127 }
::= { accAtNetEntry 8 }
-- The AtPortTable Group
accAtPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The AppleTalk port table stored in RAM. For each
valid network table entry configured in NVM when
the port table is initialized (after system reset)
there is a corresponding port table entry in RAM."
::= { accAt 7 }
accAtPortEntry OBJECT-TYPE
SYNTAX AccAtPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The information maintained in RAM for a particular
logical port."
INDEX { accAtPortTabIndex }
::= { accAtPortTable 1 }
AccAtPortEntry ::= SEQUENCE {
accAtPortTabIndex INTEGER,
accAtPortTabNetAddr OCTET STRING,
accAtPortTabState INTEGER,
accAtPortTabDescr OCTET STRING,
accAtPortTabErrCode INTEGER,
accAtPortTabErrTime TimeTicks,
accAtPortTabErrAddr OCTET STRING,
accAtPortTabErrDescr OCTET STRING,
accAtPortTabErrCount INTEGER
}
accAtPortTabIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The logical port number. Only ports which were defined
prior to the last system reset and whose configuration
entries contained valid parameters are initialized and
stored in RAM."
::= { accAtPortEntry 1 }
accAtPortTabNetAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The ports DDP network address consisting of a 16-bit
AppleTalk network number and 8-bit node id. This
address is determined dynamically during port start
up and may change after a system reset."
::= { accAtPortEntry 2 }
accAtPortTabState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
start1(2),
probe1(3),
start2(4),
up(5),
probe2(6),
query(7),
ready(8),
stop2(9),
stop1(10),
error(11)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The operational state of the port."
::= { accAtPortEntry 3 }
accAtPortTabDescr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Displayable text describing the type of logical port."
::= { accAtPortEntry 4 }
accAtPortTabErrCode OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" An error code indicating why the logical port has been
disabled. This value is set when the operational state
(accAtPortTabState) of a port is set to error(11) due
to some condition which may prevent continued operation."
::= { accAtPortEntry 5 }
accAtPortTabErrTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The time (relative to the last system reset) at which
the port became disabled."
::= { accAtPortEntry 6 }
accAtPortTabErrAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The DDP network address of a neighboring router or
AppleTalk node which was the source of information
causing the port to become disabled. The DDP address
consists of a 16-bit AppleTalk network number and
8-bit node id."
::= { accAtPortEntry 7 }
accAtPortTabErrDescr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Displayable text which describes why the port has been
disabled."
::= { accAtPortEntry 8 }
accAtPortTabErrCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of subsequent errors which have been detected
while a port is disabled."
::= { accAtPortEntry 9 }
-- The AtPortStatsTable Group
accAtPortStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Datagram Delivery Protocol (DDP) statistics maintained
and reported on a per-port basis."
::= { accAt 8 }
accAtPortStatsEntry OBJECT-TYPE
SYNTAX AccAtPortStatsEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The DDP statistics maintained for a particular logical
port."
INDEX { accAtPortTabIndex }
::= { accAtPortStatsTable 1 }
AccAtPortStatsEntry ::= SEQUENCE {
accAtPortStatsInTotals Counter,
accAtPortStatsInShorts Counter,
accAtPortStatsNotForMes Counter,
accAtPortStatsTooShorts Counter,
accAtPortStatsTooLongs Counter,
accAtPortStatsChksums Counter,
accAtPortStatsNotMyNets Counter,
accAtPortStatsInFwdReqs Counter,
accAtPortStatsFwdBcasts Counter,
accAtPortStatsNoFwdRoutes Counter,
accAtPortStatsHopCounts Counter,
accAtPortStatsReflects Counter,
accAtPortStatsOutTotals Counter,
accAtPortStatsOutShorts Counter,
accAtPortStatsOutFwdReqs Counter,
accAtPortStatsInErrors Counter,
accAtPortStatsOutErrors Counter
}
accAtPortStatsInTotals OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The total number of DDP packets received via the port."
::= { accAtPortStatsEntry 1 }
accAtPortStatsInShorts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The total number of DDP packets received with short
headers."
::= { accAtPortStatsEntry 2 }
accAtPortStatsNotForMes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of Phase 1 unicast packets received with a
LLAP header whose destination node id did not match
that of the receiving port."
::= { accAtPortStatsEntry 3 }
accAtPortStatsTooShorts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets received whose length was
less than that of a DDP header or whose physical length
was less than the logical length."
::= { accAtPortStatsEntry 4 }
accAtPortStatsTooLongs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of of DDP packets received whose length
exceeded the maximum datagram size or whose physical
length was greater than the logical length."
::= { accAtPortStatsEntry 5 }
accAtPortStatsChksums OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets received with an invalid
checksum."
::= { accAtPortStatsEntry 6 }
accAtPortStatsNotMyNets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP broadcast packets received whose
destination network number was within the range of the
connected network but which did not match the network
number assigned to the port."
::= { accAtPortStatsEntry 7 }
accAtPortStatsInFwdReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets received which were not
addressed to the receiving port (although some may
have been addressed to another port on the same
router)."
::= { accAtPortStatsEntry 8 }
accAtPortStatsFwdBcasts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP broadcast packets receive whose
destination network number was not within the range
of the connected network."
::= { accAtPortStatsEntry 9 }
accAtPortStatsNoFwdRoutes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets received for which no route
to the destination network existed."
::= { accAtPortStatsEntry 10 }
accAtPortStatsHopCounts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets received which were discarded
because the hop count had exceeded the maximum value."
::= { accAtPortStatsEntry 11 }
accAtPortStatsReflects OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets received which were addressed
to another node on the same network."
::= { accAtPortStatsEntry 12 }
accAtPortStatsOutTotals OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The total number of DDP packets sent via the port."
::= { accAtPortStatsEntry 13 }
accAtPortStatsOutShorts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets send with short headers."
::= { accAtPortStatsEntry 14 }
accAtPortStatsOutFwdReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets forwarded to this port from
all other ports."
::= { accAtPortStatsEntry 15 }
accAtPortStatsInErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets received which could not be
processed because of some internal error."
::= { accAtPortStatsEntry 16 }
accAtPortStatsOutErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of DDP packets which could not be sent
because of some internal error."
::= { accAtPortStatsEntry 17 }
-- The AtRtmpStats Group
accAtRtmpStats OBJECT IDENTIFIER ::= { accAt 9 }
-- Routing Table Maintenance Protocol (RTMP) statistics
-- maintained and reported on a per-node basis.
accAtRtmpStatsInRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP request packets received."
::= { accAtRtmpStats 1 }
accAtRtmpStatsInDataReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP route data request packets received."
::= { accAtRtmpStats 2 }
accAtRtmpStatsInResponses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP response packets received."
::= { accAtRtmpStats 3 }
accAtRtmpStatsInDataResps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP route data response packets received."
::= { accAtRtmpStats 4 }
accAtRtmpStatsOutRequests OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP request packets sent."
::= { accAtRtmpStats 5 }
accAtRtmpStatsOutDataReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP route data request packets sent."
::= { accAtRtmpStats 6 }
accAtRtmpStatsOutResponses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP response packets sent."
::= { accAtRtmpStats 7 }
accAtRtmpStatsOutDataResps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP route data response packets sent."
::= { accAtRtmpStats 8 }
accAtRtmpStatsNetConflicts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP packets received which conflicted
with the network number range configured for the
receiving port or garnered from another router."
::= { accAtRtmpStats 9 }
accAtRtmpStatsInErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP packets received containing a
format error or which could not be processed because
of some internal error."
::= { accAtRtmpStats 10 }
accAtRtmpStatsOutErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of RTMP packets which could not be sent
because of some internal error."
::= { accAtRtmpStats 11 }
-- The AtRdbStats Group
accAtRdbStats OBJECT IDENTIFIER ::= { accAt 10 }
-- Routing database statistics maintained and reported
-- on a per-node basis.
accAtRdbStatsCacheds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times the desired route was already
cached."
::= { accAtRdbStats 1 }
accAtRdbStatsSearchs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times the desired route was not cached
and the routing database had to be searched."
::= { accAtRdbStats 2 }
accAtRdbStatsNoRoutes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times no route could be found to the
destination network."
::= { accAtRdbStats 3 }
accAtRdbStatsAdds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times a new network was added to the
routing database."
::= { accAtRdbStats 4 }
accAtRdbStatsUpdates OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times an existing route was updated."
::= { accAtRdbStats 5 }
accAtRdbStatsDeletes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of times a route was deleted from the
routing database."
::= { accAtRdbStats 6 }
-- The AtNbpStats Group
accAtNbpStats OBJECT IDENTIFIER ::= { accAt 11 }
-- Name Binding Protocol (NBP) statistics maintained and
-- reported on a per-node basis.
accAtNbpStatsInBrReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP broadcast request packets received."
::= { accAtNbpStats 1 }
accAtNbpStatsInLkUpReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP lookup request packets received."
::= { accAtNbpStats 2 }
accAtNbpStatsInLkUpResps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP lookup response packets received."
::= { accAtNbpStats 3 }
accAtNbpStatsInFwdReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP forward request packets received."
::= { accAtNbpStats 4 }
accAtNbpStatsOutBrReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP broadcast request packets sent."
::= { accAtNbpStats 5 }
accAtNbpStatsOutLkUpReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP lookup request packets sent."
::= { accAtNbpStats 6 }
accAtNbpStatsOutLkUpResps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP lookup response packets sent."
::= { accAtNbpStats 7 }
accAtNbpStatsOutFwdReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP forward request packets sent."
::= { accAtNbpStats 8 }
accAtNbpStatsNoZones OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP request packets received which
referenced a zone name which was not in the zone
database."
::= { accAtNbpStats 9 }
accAtNbpStatsInErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP packets received which were invalid
or which could not be processed because of some internal
error."
::= { accAtNbpStats 10 }
accAtNbpStatsOutErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of NBP packets which could not be sent
because of some internal error."
::= { accAtNbpStats 11 }
-- The AtZipStats Group
accAtZipStats OBJECT IDENTIFIER ::= { accAt 12 }
-- Zone Information Protocol (ZIP) statistics maintained
-- and reported on a per-node basis.
accAtZipStatsInQuerys OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP zone-list-query packets received."
::= { accAtZipStats 1 }
accAtZipStatsInReplies OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP zone-list-reply packets received."
::= { accAtZipStats 2 }
accAtZipStatsInExtReplies OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP extended zone-list-reply packets
received."
::= { accAtZipStats 3 }
accAtZipStatsInInfoReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP get-network-information request
packets received."
::= { accAtZipStats 4 }
accAtZipStatsInInfoReps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP get-network-information reply
packets received."
::= { accAtZipStats 5 }
accAtZipStatsInTakeDowns OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP take-down request packets received."
::= { accAtZipStats 6 }
accAtZipStatsInBringUps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP bring-up request packets received."
::= { accAtZipStats 7 }
accAtZipStatsInNotifies OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP notify request packets received."
::= { accAtZipStats 8 }
accAtZipStatsInGetZLReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP get-zone-list request packets
received."
::= { accAtZipStats 9 }
accAtZipStatsInGetLZReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP get-local-zones request packets
received."
::= { accAtZipStats 10 }
accAtZipStatsInGetMZReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP get-my-zone request packets received."
::= { accAtZipStats 11 }
accAtZipStatsOutQueries OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP zone-list-query packets sent."
::= { accAtZipStats 12 }
accAtZipStatsOutReplies OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP zone-list-reply packets sent."
::= { accAtZipStats 13 }
accAtZipStatsOutExtReplies OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP extended zone-list-reply packets
sent."
::= { accAtZipStats 14 }
accAtZipStatsOutInfoReqs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP get-network-information request
packets sent."
::= { accAtZipStats 15 }
accAtZipStatsOutInfoReps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP get-network-information reply
packets sent."
::= { accAtZipStats 16 }
accAtZipStatsOutGetZLReps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of get-zone-list reply packets sent."
::= { accAtZipStats 17 }
accAtZipStatsOutGetLZReps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of get-local-zones reply packets sent."
::= { accAtZipStats 18 }
accAtZipStatsOutGetMZReps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of get-my-zone reply packets sent."
::= { accAtZipStats 19 }
accAtZipStatsZoneConflicts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP packets received which conflicted
with zone list or default zone information configured
for the receiving port or garnered from another router."
::= { accAtZipStats 20 }
accAtZipStatsInErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP packets received containing a
formatting error or which could not be processed
because of some internal error."
::= { accAtZipStats 21 }
accAtZipStatsOutErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of ZIP packets which could not be sent
because of some internal error."
::= { accAtZipStats 22 }
-- The AtAepStats Group
accAtAepStats OBJECT IDENTIFIER ::= { accAt 13 }
-- AppleTalk Echo Protocol (AEP) statistics maintained
-- and reported on a per-node basis.
accAtAepStatsInErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AEP packets received which were invalid
or which could not be processed because of some internal
error."
::= { accAtAepStats 1 }
accAtAepStatsOutErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of AEP packets which could not be sent
because of some internal error."
::= { accAtAepStats 2 }
-- The AtZoneListTable Group
accAtZoneListTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtZoneListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The zones list table for directly-connected AppleTalk
networks. AppleTalk networks which are configured in
the network table have their zones list configured
here. Zone names for individual networks are inter-
mingled in this table. "
::= { accAt 14 }
accAtZoneListEntry OBJECT-TYPE
SYNTAX AccAtZoneListEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry defining a zone name for some directly
connected AppleTalk network."
INDEX { accAtZoneListPort,
accAtZoneListName }
::= { accAtZoneListTable 1 }
AccAtZoneListEntry ::= SEQUENCE {
accAtZoneListPort INTEGER,
accAtZoneListStatus INTEGER,
accAtZoneListName OCTET STRING
}
accAtZoneListPort OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The logical port number."
::= { accAtZoneListEntry 1 }
accAtZoneListStatus OBJECT-TYPE
SYNTAX INTEGER {
configured(1),
default(2),
invalid(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The status of the zone list entry. If set to
default(2), the entry defines the default zone.
Entries are deleted by setting the entry status
to invalid(3)."
::= { accAtZoneListEntry 2 }
accAtZoneListName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The zone name. Zone names can contain up to 32
case-insensitive characters from the Apple Macintosh
character set."
::= { accAtZoneListEntry 3 }
-- The AtZoneBynameTable Group
accAtZoneBynameTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtZoneBynameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Used to display entries in the Zone Information
Table (ZIT) which are associated with a particular
zone name."
::= { accAt 15 }
accAtZoneBynameEntry OBJECT-TYPE
SYNTAX AccAtZoneBynameEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the zone information table (ZIT) with a
given zone name."
INDEX { accAtZoneBynameNetMin,
accAtZoneBynameName }
::= { accAtZoneBynameTable 1 }
AccAtZoneBynameEntry ::= SEQUENCE {
accAtZoneBynameNetMin OCTET STRING,
accAtZoneBynameNetMax OCTET STRING,
accAtZoneBynameName OCTET STRING
}
accAtZoneBynameNetMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The 16-bit range start value for an AppleTalk network."
::= { accAtZoneBynameEntry 1 }
accAtZoneBynameNetMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The 16-bit range end value for an AppleTalk network."
::= { accAtZoneBynameEntry 2 }
accAtZoneBynameName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The AppleTalk zone name."
::= { accAtZoneBynameEntry 3 }
-- The AtZoneBynetTable Group
accAtZoneBynetTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtZoneBynetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Used to display entries in the Zone Information
Table (ZIT) which are associated with a particular
AppleTalk network."
::= { accAt 16 }
accAtZoneBynetEntry OBJECT-TYPE
SYNTAX AccAtZoneBynetEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" An entry in the zone information table (ZIT) associated
with a given AppleTalk network."
INDEX { accAtZoneBynameNetMin,
accAtZoneBynameName }
::= { accAtZoneBynetTable 1 }
AccAtZoneBynetEntry ::= SEQUENCE {
accAtZoneBynetNetMin OCTET STRING,
accAtZoneBynetNetMax OCTET STRING,
accAtZoneBynetName OCTET STRING
}
accAtZoneBynetNetMin OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The 16-bit range start value for an AppleTalk network."
::= { accAtZoneBynetEntry 1 }
accAtZoneBynetNetMax OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The 16-bit range end value for an AppleTalk network."
::= { accAtZoneBynetEntry 2 }
accAtZoneBynetName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The AppleTalk zone name."
::= { accAtZoneBynetEntry 3 }
-- AppleTalk Forwarding Filter Table
-- AppleTalk Filters are of the form:
--
-- if message is within
-- to-address-range
-- from-address-range
-- socket-range
-- AppleTalk Application
-- then
-- {DISCARD | LOW | NORMAL | HIGH}
accAtForwardFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtForwardFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of descriptions of specific AppleTalk Filters."
::= { accAt 17 }
accAtForwardFilterEntry OBJECT-TYPE
SYNTAX AccAtForwardFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" The parameters for a single AppleTalk Filter."
INDEX { accAtForwardFilterToMin,
accAtForwardFilterToMax,
accAtForwardFilterFromMin,
accAtForwardFilterFromMax,
accAtForwardFilterSocketMin,
accAtForwardFilterSocketMax,
accAtForwardFilterType }
::= { accAtForwardFilterTable 1 }
AccAtForwardFilterEntry ::=
SEQUENCE {
accAtForwardFilterToMin
OCTET STRING,
accAtForwardFilterToMax
OCTET STRING,
accAtForwardFilterFromMin
OCTET STRING,
accAtForwardFilterFromMax
OCTET STRING,
accAtForwardFilterSocketMin
INTEGER,
accAtForwardFilterSocketMax
INTEGER,
accAtForwardFilterType
INTEGER,
accAtForwardFilterDisposition
INTEGER,
accAtForwardFilterStatus
INTEGER
}
accAtForwardFilterToMin OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The least value in the destination network address range."
::= { accAtForwardFilterEntry 1 }
accAtForwardFilterToMax OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The greatest value in the destination network address range."
::= { accAtForwardFilterEntry 2 }
accAtForwardFilterFromMin OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The least value in the source network address range."
::= { accAtForwardFilterEntry 3 }
accAtForwardFilterFromMax OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The greatest value in the source network address range."
::= { accAtForwardFilterEntry 4 }
accAtForwardFilterSocketMin OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The least value in the range of affected sockets."
::= { accAtForwardFilterEntry 5 }
accAtForwardFilterSocketMax OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The greatest value in the range of affected sockets."
::= { accAtForwardFilterEntry 6 }
accAtForwardFilterType OBJECT-TYPE
SYNTAX INTEGER {
any(1), -- all traffic
nbp(2), -- Name Binding Protocol
atp(3), -- Transaction Protocol
aep(4), -- Echo Protocol
rtmp(5), -- Routing Table Management Protocol
-- request/response (type 5) or
-- update (type 1)
zip(6), -- Zone Information Protocol
adsp(7), -- Data Stream Protocol
nbpBroadcast(8),
nbpRequest(9),
nbpResponse(10),
nbpForwardRequest(11)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The affected message types.
Name Binding Protocol messages are called out separately,
as some applications call for selective discrimination."
::= { accAtForwardFilterEntry 7 }
accAtForwardFilterDisposition OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Upon a filter match, this specifies the action taken.
discard(0),
lowPriority(1),
normalPriority(2),
highPriority(3)
"
::= { accAtForwardFilterEntry 8 }
accAtForwardFilterStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' deletes the filter table entry."
::= { accAtForwardFilterEntry 9 }
-- AppleTalk Route Filter
-- AppleTalk Route Filters are of the form:
--
-- if an update is received from someone in the range
-- router-address-range
-- and it advertises an address range
-- address-range
-- then
-- { ACCEPT | REJECT } the range
--
-- it is expected that neighboring routers may advertise
-- ranges that don't exactly overlap. It is expected that
-- advertised ranges that include both rejected and accepted
-- subranges will be treated as a succession of more limited
-- advertisements, each entirely accepted or rejected.
accAtRouteFilterTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccAtRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A list of Route Filters."
::= { accAt 18 }
accAtRouteFilterEntry OBJECT-TYPE
SYNTAX AccAtRouteFilterEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A single Route Filter."
INDEX { accAtRouteFilterRouterMin,
accAtRouteFilterRouterMax,
accAtRouteFilterRangeMin,
accAtRouteFilterRangeMax }
::= { accAtRouteFilterTable 1 }
AccAtRouteFilterEntry ::=
SEQUENCE {
accAtRouteFilterRouterMin
OCTET STRING,
accAtRouteFilterRouterMax
OCTET STRING,
accAtRouteFilterRangeMin
OCTET STRING,
accAtRouteFilterRangeMax
OCTET STRING,
accAtRouteFilterDisposition
INTEGER,
accAtRouteFilterStatus
INTEGER
}
accAtRouteFilterRouterMin OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The least affected Router's Network Address."
::= { accAtRouteFilterEntry 1 }
accAtRouteFilterRouterMax OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The greatest affected Router's Network Address."
::= { accAtRouteFilterEntry 2 }
accAtRouteFilterRangeMin OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The least Network Address in this range."
::= { accAtRouteFilterEntry 3 }
accAtRouteFilterRangeMax OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The greatest Network Address in this range."
::= { accAtRouteFilterEntry 4 }
accAtRouteFilterDisposition OBJECT-TYPE
SYNTAX INTEGER {
accept(1),
reject(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" What is to be done with matching advertisements."
::= { accAtRouteFilterEntry 5 }
accAtRouteFilterStatus OBJECT-TYPE
SYNTAX INTEGER {
invalid(1),
valid(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Writing 'invalid' has the effect of deleting the filter."
::= { accAtRouteFilterEntry 6 }
-- Bootp Group
accBootp OBJECT IDENTIFIER ::= { accBRG 29 }
-- RESERVED
-- Ping Group
accPing OBJECT IDENTIFIER ::= { accBRG 30 }
accPingDest OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" IP address of the destination
for generated Ping packets."
::= { accPing 1 }
accPingReqCnt OBJECT-TYPE
SYNTAX INTEGER (0..1000)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Count of Ping packets left to be
generated. Setting this variable to a nonzero value
causes the Ping generator to be (re)started. Setting
this variable to zero causes the Ping generator to be
stopped. "
::= { accPing 2 }
accPingDataMin OBJECT-TYPE
SYNTAX INTEGER (4..1500)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Minimum number of data bytes
included in the Ping packet. The first four bytes
of data always carry a timestamp, the remaining
data is an incrementing byte data pattern. "
::= { accPing 3 }
accPingDataMax OBJECT-TYPE
SYNTAX INTEGER (4..1500)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Maximum number of data bytes
included in the Ping packet. If this value is
greater than accPingDataMin, the data field length
of the Ping packet is a random value between accPingDataMin
and accPingDataMax. Otherwise the data field length
is fixed and specified by accPingDataMin. "
::= { accPing 4 }
accPingTimeMin OBJECT-TYPE
SYNTAX INTEGER (0..15)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Time (seconds) to delay before
generating the next Ping packet, after correctly
receiving the expected Ping response for the previously
generated Ping packet. "
::= { accPing 5 }
accPingTimeMax OBJECT-TYPE
SYNTAX INTEGER (1..60)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Time (seconds) to wait for a
correct Ping response before giving up and generating
the next Ping packet. "
::= { accPing 6 }
accPingSndPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Ping packets
generated since the current Ping activity was initiated. "
::= { accPing 7 }
accPingSndBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Ping data bytes
generated since the current Ping activity was initiated. "
::= { accPing 8 }
accPingRcvPkts OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Ping responses
received since the current Ping activity was initiated. "
::= { accPing 9 }
accPingRcvBytes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of Ping data bytes
received since the current Ping activity was initiated. "
::= { accPing 10 }
accPingRcvOKs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of correct Ping
responses received since the current Ping activity was
initiated. "
::= { accPing 11 }
accPingRcvBads OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of incorrect Ping
responses received since the current Ping activity was
initiated. "
::= { accPing 12 }
accPingDelayMin OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Minimum round trip delay, in
milliseconds, experienced by the Ping packet and
the Ping response. "
::= { accPing 13 }
accPingDelayMax OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Maximum round trip delay, in
milliseconds, experienced by the Ping packet and
the Ping response. "
::= { accPing 14 }
accPingDelayAvg OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Average round trip delay, in
milliseconds, experienced by the Ping packet and
the Ping response. "
::= { accPing 15 }
-- Dial Group
accDial OBJECT IDENTIFIER ::= { accBRG 31 }
-- Dial Control MIB
CallAddress ::= DisplayString (SIZE (0..128))
-- Objects of this type are physical ports, identified by
-- ifIndex value, which back up other physical ports,
-- by ifIndex value.
--
BackupPort ::= INTEGER -- 1..ifNumber
-- Objects of this type are physical ports
--
PhysicalPort ::= INTEGER -- 1..ifNumber
-- Dial Backup Table
-- The Dial Backup Table specifies which physical ports
-- backup which other physical ports, and under what circumstances
-- will be activated or de-activated.
accDialBackupTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialBackupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of associations between physical ports."
REFERENCE
"Dial Control Procedure "
::= { accDial 1 }
accDialBackupEntry OBJECT-TYPE
SYNTAX AccDialBackupEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"An association between two ports."
INDEX { accDialBackupPrimary }
::= { accDialBackupTable 1 }
AccDialBackupEntry ::=
SEQUENCE {
accDialBackupPort
BackupPort,
accDialBackupPrimary
PhysicalPort,
accDialBackupControl
INTEGER,
accDialBackupRetry
INTEGER,
accDialBackupDamp
INTEGER,
accDialBackupCallCongestion
INTEGER,
accDialBackupClearCongestion
INTEGER,
accDialBackupCallError
INTEGER,
accDialBackupCallAddress
CallAddress,
accDialBackupStatus
INTEGER,
accDialBackupState
INTEGER
}
accDialBackupPort OBJECT-TYPE
SYNTAX BackupPort
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The ifIndex value of the port backing up the
primary port."
::= { accDialBackupEntry 1 }
accDialBackupPrimary OBJECT-TYPE
SYNTAX PhysicalPort
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The ifIndex value of the port backed up."
::= { accDialBackupEntry 2 }
accDialBackupControl OBJECT-TYPE
SYNTAX INTEGER {
master (1), -- This system calls
slave (2), -- this system is called
demand (3) -- this system does either
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Backup Control indicates under what conditions
a call is placed or accepted."
DEFVAL { demand }
::= { accDialBackupEntry 3 }
accDialBackupRetry OBJECT-TYPE
SYNTAX INTEGER (0..3600)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The number of seconds the system will wait be-
fore retrying a failed call."
DEFVAL { 10 }
::= { accDialBackupEntry 4 }
accDialBackupDamp OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"Damping factor."
DEFVAL { 3 }
::= { accDialBackupEntry 5 }
accDialBackupCallCongestion OBJECT-TYPE
SYNTAX INTEGER ( 0..101 )
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the average octet rate transmitted (or, on
a master, received) exceeds this percentage
times the ifSpeed of the primary link, a call
will be placed."
DEFVAL { 80 }
::= { accDialBackupEntry 6 }
accDialBackupClearCongestion OBJECT-TYPE
SYNTAX INTEGER ( 0..101 )
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the sum of the primary and backup link's
average octet rates (transmitted or, on a mas-
ter, received) falls below this percentage
times the ifSpeed of the primary link, an out-
standing call will be cleared.
If ClearCongestion >= CallCongestion, the entry
will not be acted upon by software, but will
result in a trap at system startup."
DEFVAL { 50 }
::= { accDialBackupEntry 7 }
accDialBackupCallError OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If the average sum of ifInDiscards, ifInEr-
rors, ifOutDiscards, ifOutErrors, accLapbStat-
BadFCSIns, accLapbStatT1Timeouts, accLapbSta-
tREJIns, and accLapbStatREJOuts exceeds this
value, a call will be placed.
The call will be cleared when the average be-
comes zero."
DEFVAL { 5 }
::= { accDialBackupEntry 8 }
accDialBackupCallAddress OBJECT-TYPE
SYNTAX CallAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The address to be called, in ASCII.
No validation is performed on this variable."
::= { accDialBackupEntry 9 }
accDialBackupStatus OBJECT-TYPE
SYNTAX INTEGER {
valid (1),
invalid (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If this object is set to 'invalid', the entry
is deleted."
DEFVAL { valid }
::= { accDialBackupEntry 10 }
accDialBackupState OBJECT-TYPE
SYNTAX INTEGER {
congestOut (1), -- call due to transmit congestion
congestIn (2), -- call due to receive congestion
errors (3), -- call due to errors on link
backup (4), -- call due to primary link failure
manual (5), -- call administratively placed
clear (6) -- no call active
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The current call state from the primary link's
perspective. The only values acceptable on a
SET are 'manual' and 'clear'. If 'manual' is
SET, the backup link will place a call immedi-
ately or when it next becomes available. If
'clear' is SET when a call is administratively
placed, either the call will be cleared, or the
call will continue for another reason. If
'clear' is set when no call is administratively
placed, there is no effect."
DEFVAL { clear }
::= { accDialBackupEntry 11 }
accDialPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table containing DOD-port specific variables
for this DOD implementation."
::= { accDial 2 }
accDialPortEntry OBJECT-TYPE
SYNTAX AccDialPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Management information about a particular DOD Port."
INDEX { accDialPortIndex }
::= { accDialPortTable 1 }
AccDialPortEntry ::= SEQUENCE {
accDialPortIndex INTEGER,
accDialPortContents INTEGER,
accDialPortStationType INTEGER,
accDialPortAdminState INTEGER,
accDialPortCallState INTEGER,
accDialPortRetryInterval TimeTicks,
accDialPortRetryCount INTEGER,
accDialPortClearingInterv TimeTicks,
accDialPortMessageLevel INTEGER,
accDialPortPhysicalPort INTEGER,
accDialPortCallAddress OCTET STRING,
accDialPortPhysicalPortStr OCTET STRING,
accDialPortCallAddressStr OCTET STRING,
accDialPortPassword OCTET STRING,
accDialPortName OCTET STRING
}
accDialPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Dial port number"
::= { accDialPortEntry 1 }
accDialPortContents OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Setting this object to invalid deletes dial port
or call address or physical port."
::= { accDialPortEntry 2 }
accDialPortStationType OBJECT-TYPE
SYNTAX INTEGER {
master(1),
slave(2),
demand(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Type of station for this dial port. Master can
place calls, slave can accept calls, demand can
do both."
::= { accDialPortEntry 3 }
accDialPortAdminState OBJECT-TYPE
SYNTAX INTEGER {
down(1),
up(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The administrative state of this dial port."
::= { accDialPortEntry 4 }
accDialPortCallState OBJECT-TYPE
SYNTAX INTEGER {
clear(1),
call(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The dial state of this dial port. This is more
of a operator request than a state. Depending on
the current state of the dial port the command that
sets the value of this object may or may not be
acted immediately."
::= { accDialPortEntry 5 }
accDialPortRetryInterval OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of seconds allowed to elapse between two
dial attempts."
::= { accDialPortEntry 6 }
accDialPortRetryCount OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Total number of dial attempts."
::= { accDialPortEntry 7 }
accDialPortClearingInterv OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Number of seconds to wait with no traffic
to hangup this dial session."
::= { accDialPortEntry 8 }
accDialPortMessageLevel OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Current message level for how much to display
for this dial port.
1 - Error messages.
2 - Unused + 1.
3 - Warning messages + 2.
4 - Unused + 3.
5 - Dial activity + 4.
6 - Unused + 5.
7 - Dial port state changes + 6."
::= { accDialPortEntry 9 }
accDialPortPhysicalPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS write-only
STATUS mandatory
DESCRIPTION
" One of the possible physical ports this dial
port may associate."
::= { accDialPortEntry 10 }
accDialPortCallAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS write-only
STATUS mandatory
DESCRIPTION
" One of the possible call addresses this dial
port may call."
::= { accDialPortEntry 11 }
accDialPortPhysicalPortStr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The concatenated string of all physical ports
associated with this dial port."
::= { accDialPortEntry 12 }
accDialPortCallAddressStr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The concatenated string of all call address/name
entries associated with this dial port."
::= { accDialPortEntry 13 }
accDialPortPassword OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS write-only
STATUS mandatory
DESCRIPTION
" The password associated with the call address."
::= { accDialPortEntry 14 }
accDialPortName OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS write-only
STATUS mandatory
DESCRIPTION
" The name associated with the call address.
The combination of name and password is used for
the outbound PAP negotiation."
::= { accDialPortEntry 15 }
accDialPortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialPortStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table containing the operational parameters
for this dial port."
::= { accDial 3 }
accDialPortStatEntry OBJECT-TYPE
SYNTAX AccDialPortStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Current status for this dial port."
INDEX { accDialPortStatIndex }
::= { accDialPortStatTable 1 }
AccDialPortStatEntry ::= SEQUENCE {
accDialPortStatIndex INTEGER,
accDialPortStatActPhysPort INTEGER,
accDialPortStatState INTEGER,
accDialPortStatTrigFwdr INTEGER,
accDialPortStatElapsedTime TimeTicks,
accDialPortStatTrigSrcAddr OCTET STRING,
accDialPortStatTrigCallAddr OCTET STRING,
accDialPortStatSuccessOut INTEGER,
accDialPortStatUnsuccessOut INTEGER,
accDialPortStatSuccessIn INTEGER,
accDialPortStatUnsuccessIn INTEGER
}
accDialPortStatIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Dial port number."
::= { accDialPortStatEntry 1 }
accDialPortStatActPhysPort OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The physical port currently connected with
or recently connected with."
::= { accDialPortStatEntry 2 }
accDialPortStatState OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The current state of this dial port.
The following is a list of valid states:
down(0),
disconnected(1),
queued(2),
answering(3),
dialing(4),
connected(5) "
::= { accDialPortStatEntry 3 }
accDialPortStatTrigFwdr OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Application which started this dial session.
The following is a list of applications:
none(0),
management(1),
inbound(2),
ip(33),
idp(37),
decnet(39),
appletalk(41),
ipx(43),
bridging(177),
sr(179)"
::= { accDialPortStatEntry 4 }
accDialPortStatElapsedTime OBJECT-TYPE
SYNTAX TimeTicks
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of seconds that this dial port has
been in the current state."
::= { accDialPortStatEntry 5 }
accDialPortStatTrigSrcAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Source address of forwarder message that
started this dial session. "
::= { accDialPortStatEntry 6 }
accDialPortStatTrigCallAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Phone number connected to during this dial
session or the last dial session."
::= { accDialPortStatEntry 7 }
accDialPortStatSuccessOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of successfull outgoing calls on
this dial port."
::= { accDialPortStatEntry 8 }
accDialPortStatUnsuccessOut OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of unsuccessfull call attempts on
this dial port."
::= { accDialPortStatEntry 9 }
accDialPortStatSuccessIn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Number of successfull incoming calls on
this dial port."
::= { accDialPortStatEntry 10 }
accDialPortStatUnsuccessIn OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" Total number of unsuccessfull incoming calls."
::= { accDialPortStatEntry 11 }
-- Dial Originate databases
-- Appletalk
accDialOrigAtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialOrigAtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table containing dial originate database
for Appletalk."
::= { accDial 4 }
accDialOrigAtEntry OBJECT-TYPE
SYNTAX AccDialOrigAtEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Dial originate information entry for Appletalk."
INDEX { accDialOrigAtDestStart,
accDialOrigAtDestEnd,
accDialOrigAtSourceStart,
accDialOrigAtSourceEnd }
::= { accDialOrigAtTable 1 }
AccDialOrigAtEntry ::= SEQUENCE {
accDialOrigAtStatus INTEGER,
accDialOrigAtDestStart OCTET STRING,
accDialOrigAtDestEnd OCTET STRING,
accDialOrigAtSourceStart OCTET STRING,
accDialOrigAtSourceEnd OCTET STRING,
accDialOrigAtTraffic INTEGER,
accDialOrigAtAction INTEGER
}
accDialOrigAtStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS write-only
STATUS mandatory
DESCRIPTION
" Writing 'invalid' deletes the filter table entry."
::= { accDialOrigAtEntry 1 }
accDialOrigAtDestStart OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination range start for this Appletalk entry
in the dial originate database."
::= { accDialOrigAtEntry 2 }
accDialOrigAtDestEnd OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination range end for this Appletalk entry
in the dial originate database."
::= { accDialOrigAtEntry 3 }
accDialOrigAtSourceStart OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source range start for this Appletalk entry
in the dial originate database."
::= { accDialOrigAtEntry 4 }
accDialOrigAtSourceEnd OBJECT-TYPE
SYNTAX OCTET STRING -- (SIZE(2))
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source range end for this Appletalk entry
in the dial originate database."
::= { accDialOrigAtEntry 5 }
accDialOrigAtTraffic OBJECT-TYPE
SYNTAX INTEGER {
any(1),
nbp(2),
atp(3),
aep(4),
rtmp(5),
zip(6),
adsp(7),
nbpbroadcast(8),
nbplookup(9),
nbpreply(10),
nbpforwardreq(11)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Traffic info for this Appletalk entry
in the dial originate database."
::= { accDialOrigAtEntry 6 }
accDialOrigAtAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
disallow(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Allow-disallow info for this Appletalk entry
in the dial originate database."
::= { accDialOrigAtEntry 7 }
-- Decnet
accDialOrigDnTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialOrigDnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table containing dial originate database
for Decnet."
::= { accDial 5 }
accDialOrigDnEntry OBJECT-TYPE
SYNTAX AccDialOrigDnEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Dial originate information entry for Decnet."
INDEX { accDialOrigDnDestAddr,
accDialOrigDnSourceAddr }
::= { accDialOrigDnTable 1 }
AccDialOrigDnEntry ::= SEQUENCE {
accDialOrigDnStatus INTEGER,
accDialOrigDnDestAddr INTEGER,
accDialOrigDnSourceAddr INTEGER,
accDialOrigDnAction INTEGER
}
accDialOrigDnStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS write-only
STATUS mandatory
DESCRIPTION
" Writing 'invalid' deletes the filter table entry."
::= { accDialOrigDnEntry 1 }
accDialOrigDnDestAddr OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination address for this Decnet entry
in the dial originate database."
::= { accDialOrigDnEntry 2 }
accDialOrigDnSourceAddr OBJECT-TYPE
SYNTAX INTEGER (0..65535)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source address for this Decnet entry
in the dial originate database."
::= { accDialOrigDnEntry 3 }
accDialOrigDnAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
disallow(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Allow-disallow info for this Decnet entry
in the dial originate database."
::= { accDialOrigDnEntry 4 }
-- Bridge
accDialOrigBrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialOrigBrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table containing dial originate database
for Bridge."
::= { accDial 6 }
accDialOrigBrEntry OBJECT-TYPE
SYNTAX AccDialOrigBrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Dial originate information entry for Bridge."
INDEX { accDialOrigBrDestMacAddr,
accDialOrigBrSourceMacAddr }
::= { accDialOrigBrTable 1 }
AccDialOrigBrEntry ::= SEQUENCE {
accDialOrigBrStatus INTEGER,
accDialOrigBrDestMacAddr OCTET STRING,
accDialOrigBrSourceMacAddr OCTET STRING,
accDialOrigBrAction INTEGER
}
accDialOrigBrStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS write-only
STATUS mandatory
DESCRIPTION
" Writing 'invalid' deletes the filter table entry."
::= { accDialOrigBrEntry 1 }
accDialOrigBrDestMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination mac address start for this Bridge entry
in the dial originate database."
::= { accDialOrigBrEntry 2 }
accDialOrigBrSourceMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source mac address for this Bridge entry
in the dial originate database."
::= { accDialOrigBrEntry 3 }
accDialOrigBrAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
disallow(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Allow-disallow info for this Bridge entry
in the dial originate database."
::= { accDialOrigBrEntry 4 }
-- Idp
accDialOrigIdpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialOrigIdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table containing dial originate database
for Idp."
::= { accDial 7 }
accDialOrigIdpEntry OBJECT-TYPE
SYNTAX AccDialOrigIdpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Dial originate information entry for Idp."
INDEX { accDialOrigIdpDestNet,
accDialOrigIdpSourceNet }
::= { accDialOrigIdpTable 1 }
AccDialOrigIdpEntry ::= SEQUENCE {
accDialOrigIdpStatus INTEGER,
accDialOrigIdpDestNet OCTET STRING,
accDialOrigIdpSourceNet OCTET STRING,
accDialOrigIdpAction INTEGER
}
accDialOrigIdpStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS write-only
STATUS mandatory
DESCRIPTION
" Writing 'invalid' deletes the filter table entry."
::= { accDialOrigIdpEntry 1 }
accDialOrigIdpDestNet OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination network for this Idp entry
in the dial originate database."
::= { accDialOrigIdpEntry 2 }
accDialOrigIdpSourceNet OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source network for this Idp entry
in the dial originate database."
::= { accDialOrigIdpEntry 3 }
accDialOrigIdpAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
disallow(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Allow-disallow info for this Idp entry
in the dial originate database."
::= { accDialOrigIdpEntry 4 }
-- Ip
accDialOrigIpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialOrigIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table containing dial originate database for Ip."
::= { accDial 8 }
accDialOrigIpEntry OBJECT-TYPE
SYNTAX AccDialOrigIpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Dial originate information entry for Ip."
INDEX { accDialOrigIpDestAddr,
accDialOrigIpDestMask,
accDialOrigIpSourceAddr,
accDialOrigIpSourceMask,
accDialOrigIpParm }
::= { accDialOrigIpTable 1 }
AccDialOrigIpEntry ::= SEQUENCE {
accDialOrigIpStatus INTEGER,
accDialOrigIpDestAddr IpAddress,
accDialOrigIpDestMask IpAddress,
accDialOrigIpSourceAddr IpAddress,
accDialOrigIpSourceMask IpAddress,
accDialOrigIpParm OCTET STRING,
accDialOrigIpAction INTEGER
}
accDialOrigIpStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS write-only
STATUS mandatory
DESCRIPTION
" Writing 'invalid' deletes the filter table entry."
::= { accDialOrigIpEntry 1 }
accDialOrigIpDestAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination address for this Ip entry
in the dial originate database."
::= { accDialOrigIpEntry 2 }
accDialOrigIpDestMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination mask for this Ip entry
in the dial originate database."
::= { accDialOrigIpEntry 3 }
accDialOrigIpSourceAddr OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source address for this Ip entry
in the dial originate database."
::= { accDialOrigIpEntry 4 }
accDialOrigIpSourceMask OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source mask for this Ip entry
in the dial originate database."
::= { accDialOrigIpEntry 5 }
accDialOrigIpParm OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Filter parameters;
Byte 0 is Operation 1
[0,1,2] = [None, !,=]
Bytes 1,2 is Protocol
Byte 3 is Operation 2
[0 = none
[1,2,3,4] = both [!, <, >, =]
[5,6,7,8] = destination [!, <, >, =]
[9,10,11,12] = source [!, <, >, =]
Bytes 4,5 is UDP/TCP port number"
::= { accDialOrigIpEntry 6 }
accDialOrigIpAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
disallow(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Allow-disallow info for this Ip entry
in the dial originate database."
::= { accDialOrigIpEntry 7 }
-- Ipx
accDialOrigIpxTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialOrigIpxEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table containing dial originate database for Ipx."
::= { accDial 9 }
accDialOrigIpxEntry OBJECT-TYPE
SYNTAX AccDialOrigIpxEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Dial originate information entry for Ipx."
INDEX { accDialOrigIpxDestNet,
accDialOrigIpxSourceNet }
::= { accDialOrigIpxTable 1 }
AccDialOrigIpxEntry ::= SEQUENCE {
accDialOrigIpxStatus INTEGER,
accDialOrigIpxDestNet OCTET STRING,
accDialOrigIpxSourceNet OCTET STRING,
accDialOrigIpxAction INTEGER
}
accDialOrigIpxStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS write-only
STATUS mandatory
DESCRIPTION
" Writing 'invalid' deletes the filter table entry."
::= { accDialOrigIpxEntry 1 }
accDialOrigIpxDestNet OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination network for this Ipx entry
in the dial originate database."
::= { accDialOrigIpxEntry 2 }
accDialOrigIpxSourceNet OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source network for this Ipx entry
in the dial originate database."
::= { accDialOrigIpxEntry 3 }
accDialOrigIpxAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
disallow(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Allow-disallow info for this Ipx entry
in the dial originate database."
::= { accDialOrigIpxEntry 4 }
-- Sr
accDialOrigSrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccDialOrigSrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" A table containing dial originate database for Sr."
::= { accDial 10 }
accDialOrigSrEntry OBJECT-TYPE
SYNTAX AccDialOrigSrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Dial originate information entry for Sr."
INDEX { accDialOrigSrDestMacAddr,
accDialOrigSrSourceMacAddr }
::= { accDialOrigSrTable 1 }
AccDialOrigSrEntry ::= SEQUENCE {
accDialOrigSrStatus INTEGER,
accDialOrigSrDestMacAddr OCTET STRING,
accDialOrigSrSourceMacAddr OCTET STRING,
accDialOrigSrAction INTEGER
}
accDialOrigSrStatus OBJECT-TYPE
SYNTAX INTEGER {
other(1),
invalid(2)
}
ACCESS write-only
STATUS mandatory
DESCRIPTION
"Writing 'invalid' deletes the filter table entry."
::= { accDialOrigSrEntry 1 }
accDialOrigSrDestMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Destination mac address for this Sr entry
in the dial originate database."
::= { accDialOrigSrEntry 2 }
accDialOrigSrSourceMacAddr OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Source mac address for this Sr entry
in the dial originate database."
::= { accDialOrigSrEntry 3 }
accDialOrigSrAction OBJECT-TYPE
SYNTAX INTEGER {
allow(1),
disallow(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Allow-disallow info for this Sr entry
in the dial originate database."
::= { accDialOrigSrEntry 4 }
-- RESERVED
-- Point-to-Point Protocol Group
accPpp OBJECT IDENTIFIER ::= { accBRG 32 }
accPppLinkTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccPppLinkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing PPP-link specific variables
for this PPP implementation."
::= { accPpp 1 }
accPppLinkEntry OBJECT-TYPE
SYNTAX AccPppLinkEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Management information about a particular PPP
Link."
INDEX { accPppLinkIndex }
::= { accPppLinkTable 1 }
AccPppLinkEntry ::= SEQUENCE {
accPppLinkIndex
INTEGER,
accPppLinkPhysicalIndex
INTEGER,
accPppLinkBadAddresses
Counter,
accPppLinkBadControls
Counter,
accPppLinkPacketTooLongs
Counter,
accPppLinkBadFCSs
Counter,
accPppLinkLocalMRU
INTEGER,
accPppLinkRemoteMRU
INTEGER
}
accPppLinkIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface number"
::= { accPppLinkEntry 1 }
accPppLinkPhysicalIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accPppLinkEntry 2 }
accPppLinkBadAddresses OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets received with an
incorrect Address Field. "
::= { accPppLinkEntry 3 }
accPppLinkBadControls OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of packets received on this link
with an incorrect Control Field. "
::= { accPppLinkEntry 4 }
accPppLinkPacketTooLongs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of received packets that have been
discarded because their length exceeded the MRU."
::= { accPppLinkEntry 5 }
accPppLinkBadFCSs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accPppLinkEntry 6 }
accPppLinkLocalMRU OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The final negotiated MRU value for the local
PPP Entity. This value is the MRU that the
remote entity has accepted for the local PPP
entity."
::= { accPppLinkEntry 7 }
accPppLinkRemoteMRU OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The final negotiated MRU value for the remote
PPP Entity."
::= { accPppLinkEntry 8 }
accPppLcpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccPppLcpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A table containing the LCP configuration
parameters for this PPP Link. These variables
represent the initial configuration of the PPP
Link. The actual values of the parameters may
be changed when the link is brought up via the
LCP options negotiation mechanism."
::= { accPpp 2 }
accPppLcpConfigEntry OBJECT-TYPE
SYNTAX AccPppLcpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Configuration information about a particular
PPP Link."
INDEX { accPppLcpConfigIndex }
::= { accPppLcpConfigTable 1 }
AccPppLcpConfigEntry ::= SEQUENCE {
accPppLcpConfigIndex
INTEGER,
accPppLcpConfigInitialMRU
INTEGER,
accPppLcpConfigReceiveACCMap
INTEGER,
accPppLcpConfigMagicNumber
INTEGER,
accPppLcpConfig32BitFCS
INTEGER,
accPppLcpRestartTimer
INTEGER,
accPppLcpMaxTerminate
INTEGER,
accPppLcpMaxConfigure
INTEGER,
accPppLcpMaxFailure
INTEGER
}
accPppLcpConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface number"
::= { accPppLcpConfigEntry 1 }
accPppLcpConfigInitialMRU OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The initial Maximum Receive Unit (MRU) that
the local PPP entity will advertise to the
remote entity. If the value of this variable is
0 then the local PPP entity will not advertise
any MRU to the remote entity and the default
MRU will be assumed. Changing this object will
have effect when the link is next restarted."
DEFVAL { 1500 }
::= { accPppLcpConfigEntry 2 }
accPppLcpConfigReceiveACCMap OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { accPppLcpConfigEntry 3 }
accPppLcpConfigMagicNumber OBJECT-TYPE
SYNTAX INTEGER {false (1), true (2)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If true(2) then the local node will attempt to
perform Magic Number negotiation with the
remote node. If false(1) then this negotiation
is not performed. In any event, the local node
will comply with any magic number negotiations
attempted by the remote node, per the PPP
specification. Changing this object will have
effect when the link is next restarted."
DEFVAL { false }
::= { accPppLcpConfigEntry 4 }
accPppLcpConfig32BitFCS OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" "
::= { accPppLcpConfigEntry 5 }
accPppLcpRestartTimer OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accPppLcpConfigEntry 6 }
accPppLcpMaxTerminate OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accPppLcpConfigEntry 7 }
accPppLcpMaxConfigure OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accPppLcpConfigEntry 8 }
accPppLcpMaxFailure OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
" "
::= { accPppLcpConfigEntry 9 }
accPppLqrTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccPppLqrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the LQR parameters and
statistics for the local PPP entity."
::= { accPpp 3 }
accPppLqrEntry OBJECT-TYPE
SYNTAX AccPppLqrEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"LQR information for a particular PPP link. A
PPP link will have an entry in this table if
and only if LQR Quality Monitoring has been
successfully negotiated for said link."
INDEX { accPppLqrIndex }
::= { accPppLqrTable 1 }
AccPppLqrEntry ::= SEQUENCE {
accPppLqrIndex
INTEGER,
accPppLqrQuality
INTEGER,
accPppLqrInGoodOctets
Counter,
accPppLqrLocalPeriod
INTEGER,
accPppLqrRemotePeriod
INTEGER,
accPppLqrOutLQRs
Counter,
accPppLqrInLQRs
Counter
}
accPppLqrIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface number"
::= { accPppLqrEntry 1 }
accPppLqrQuality OBJECT-TYPE
SYNTAX INTEGER {
good(1),
bad(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current quality of the link as declared by
the local PPP entity's Link-Quality Management
modules. No effort is made to define good or
bad, nor the policy used to determine it."
::= { accPppLqrEntry 2 }
accPppLqrInGoodOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The LQR InGoodOctets counter for this link."
::= { accPppLqrEntry 3 }
accPppLqrLocalPeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The LQR reporting period that is in effect for
the local PPP entity. The local entity received
a configure-ack for this value from the remote
PPP entity."
::= { accPppLqrEntry 4 }
accPppLqrRemotePeriod OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The LQR reporting period that is in effect for
the remote PPP entity. The local entity sent a
configure-ack for this value in response to the
configure-req from the remote PPP entity."
::= { accPppLqrEntry 5 }
accPppLqrOutLQRs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the OutLQRs counter on the local
node for the link identified by
accPppLqrLinkIndex."
::= { accPppLqrEntry 6 }
accPppLqrInLQRs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of the InLQRs counter on the local
node for the link identified by
accPppLqrLinkIndex."
::= { accPppLqrEntry 7 }
accPppLqrConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccPppLqrConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the LQR Configuration
parameters for the local PPP entity."
::= { accPpp 4 }
accPppLqrConfigEntry OBJECT-TYPE
SYNTAX AccPppLqrConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"LQR configuration information for a particular
PPP link."
INDEX { accPppLqrConfigIndex }
::= { accPppLqrConfigTable 1 }
AccPppLqrConfigEntry ::= SEQUENCE {
accPppLqrConfigIndex
INTEGER,
accPppLqrConfigPeriod
INTEGER,
accPppLqrConfigStatus
INTEGER
}
accPppLqrConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface number"
::= { accPppLqrConfigEntry 1 }
accPppLqrConfigPeriod OBJECT-TYPE
SYNTAX INTEGER(0..2147483648)
ACCESS read-write
STATUS mandatory
DESCRIPTION
"The LQR Reporting Period that the local PPP
entity will attempt to negotiate with the
remote entity, in units of seconds. Changing
this object will have effect when the link is
next restarted."
DEFVAL { 10 }
::= { accPppLqrConfigEntry 2 }
accPppLqrConfigStatus OBJECT-TYPE
SYNTAX INTEGER {disabled (1), enabled (2)}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled(2) then the local node will attempt
to perform LQR negotiation with the remote
node. If disabled(1) then this negotiation is
not performed. In any event, the local node
will comply with any magic number negotiations
attempted by the remote node, per the PPP
specification. Changing this object will have
effect when the link is next restarted.
Setting this object to the value disabled(1)
has the effect of invalidating the
corresponding entry in the accPppLqrConfigTable
object. It is an implementation-specific matter
as to whether the agent removes an invalidated
entry from the table. Accordingly, management
stations must be prepared to receive tabular
information from agents that corresponds to
entries not currently in use."
DEFVAL { enabled }
::= { accPppLqrConfigEntry 3 }
accPppIpcpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccPppIpcpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the IPCP parameters and
statistics for the local PPP entity."
::= { accPpp 5 }
accPppIpcpEntry OBJECT-TYPE
SYNTAX AccPppIpcpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPCP information for a particular PPP link. A
PPP link will have an entry in this table if
and only if running IP over the PPP link has
been successfully negotiated for said link."
INDEX { accPppIpcpIndex }
::= { accPppIpcpTable 1 }
AccPppIpcpEntry ::= SEQUENCE {
accPppIpcpIndex
INTEGER,
accPppIpcpLocalToRemoteCompressionProtocol
INTEGER,
accPppIpcpRemoteToLocalCompressionProtocol
INTEGER,
accPppIpcpRemoteMaxSlotId
INTEGER,
accPppIpcpLocalMaxSlotId
INTEGER
}
accPppIpcpIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface number"
::= { accPppIpcpEntry 1 }
accPppIpcpLocalToRemoteCompressionProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(1),
vj-tcp(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP compression protocol that the local
PPP-IP entity uses when sending packets to the
remote PPP-IP entity."
::= { accPppIpcpEntry 2 }
accPppIpcpRemoteToLocalCompressionProtocol OBJECT-TYPE
SYNTAX INTEGER {
none(1),
vj-tcp(2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The IP compression protocol that the remote
PPP-IP entity uses when sending packets to the
local PPP-IP entity."
::= { accPppIpcpEntry 3 }
accPppIpcpRemoteMaxSlotId OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Max-Slot-Id parameter that the remote node
has advertised and that is in use on the link."
::= { accPppIpcpEntry 4 }
accPppIpcpLocalMaxSlotId OBJECT-TYPE
SYNTAX INTEGER(0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The Max-Slot-Id parameter that the local node
has advertised and that is in use on the link."
::= { accPppIpcpEntry 5 }
accPppIpcpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccPppIpcpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the IPCP parameters and
statistics for the local PPP entity."
::= { accPpp 6 }
accPppIpcpConfigEntry OBJECT-TYPE
SYNTAX AccPppIpcpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"IPCP information for a particular PPP link. A
PPP link will have an entry in this table if
and only if running IP over the PPP link has
been successfully negotiated for said link."
INDEX { accPppIpcpConfigIndex }
::= { accPppIpcpConfigTable 1 }
AccPppIpcpConfigEntry ::= SEQUENCE {
accPppIpcpConfigIndex
INTEGER,
accPppIpcpConfigCompression
INTEGER,
accPppIpcpConfigStatus
INTEGER
}
accPppIpcpConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of ifIndex that identifies the entry
in the ifTable that is associated with the
local IPCP entity."
::= { accPppIpcpConfigEntry 1 }
accPppIpcpConfigCompression OBJECT-TYPE
SYNTAX INTEGER {
none(1),
vj-tcp(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If none(1) then the local node will not
attempt to negotiate any IP Compression option.
Otherwise, the local node will attempt to
negotiate compression mode indicated by the
enumerated value Changing this object will have
effect when the link is next restarted."
DEFVAL { none }
::= { accPppIpcpConfigEntry 2 }
accPppIpcpConfigStatus OBJECT-TYPE
SYNTAX INTEGER {
disabled(1),
enabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If enabled(2) then the local node will allow
IP traffic to flow across the link. If
disabled(1) then IP traffic will not be allowed
to flow across the link. Setting this object
to the value disabled(1) has the effect of
invalidating the corresponding entry in the
accPppIpcpConfigTable object. It is an
implementation-specific matter as to whether
the agent removes an invalidated entry from the
table. Accordingly, management stations must be
prepared to receive tabular information from
agents that corresponds to entries not
currently in use."
DEFVAL { enabled }
::= { accPppIpcpConfigEntry 3 }
accPppBncpTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccPppBncpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the parameters and statistics
for the local PPP entity that are related to
the operation of Bridging over the PPP."
::= { accPpp 7 }
accPppBncpEntry OBJECT-TYPE
SYNTAX AccPppBncpEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bridging NCP information for a particular PPP
link. A PPP link will have an entry in this
table if and only if Bridging over PPP has been
successfully negotiated for said link."
INDEX { accPppBncpIndex }
::= { accPppBncpTable 1 }
AccPppBncpEntry ::= SEQUENCE {
accPppBncpIndex
INTEGER,
accPppBncpLocalToRemoteTinygramCompression
INTEGER,
accPppBncpRemoteToLocalTinygramCompression
INTEGER,
accPppBncpLocalToRemoteLanId
INTEGER,
accPppBncpRemoteToLocalLanId
INTEGER
}
accPppBncpIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Interface number"
::= { accPppBncpEntry 1 }
accPppBncpLocalToRemoteTinygramCompression OBJECT-TYPE
SYNTAX INTEGER { false(1), true(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the local node will perform
Tinygram Compression when sending packets to
the remote entity. If false then the local
entity will not perform Tinygram Compression.
If true then the local entity will perform
Tinygram Compression."
::= { accPppBncpEntry 2 }
accPppBncpRemoteToLocalTinygramCompression OBJECT-TYPE
SYNTAX INTEGER { false(1), true(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates what the local node believes to be
the remote node will perform Tinygram
Compression when sending packets to the local
node. If false then the remote entity is not
expected to perform Tinygram Compression. If
true then the remote entity is expected to
perform Tinygram Compression."
::= { accPppBncpEntry 3 }
accPppBncpLocalToRemoteLanId OBJECT-TYPE
SYNTAX INTEGER { false(1), true(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the local node will include
the LAN Identification field in transmitted
packets or not. If false(1) then the local node
will not transmit this field, true(2) means
that the field will be transmitted."
::= { accPppBncpEntry 4 }
accPppBncpRemoteToLocalLanId OBJECT-TYPE
SYNTAX INTEGER { false(1), true(2) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Indicates whether the remote node has
indicated that it will include the LAN
Identification field in transmitted packets or
not. If false(1) then the field will not be
transmitted, if true(2) then the field will be
transmitted."
::= { accPppBncpEntry 5 }
accPppBncpConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccPppBncpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing the parameters and statistics
for the local PPP entity that are related to
the operation of Bridging over the PPP."
::= { accPpp 8 }
accPppBncpConfigEntry OBJECT-TYPE
SYNTAX AccPppBncpConfigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Bridging NCP information for a particular PPP
link. A PPP link will have an entry in this
table if and only if Bridging over PPP has been
successfully negotiated for said link."
INDEX { accPppBncpConfigIndex }
::= { accPppBncpConfigTable 1 }
AccPppBncpConfigEntry ::= SEQUENCE {
accPppBncpConfigIndex
INTEGER,
accPppBncpConfigTinygram
INTEGER,
accPppBncpConfigRingId
INTEGER,
accPppBncpConfigLineId
INTEGER,
accPppBncpConfigLanId
INTEGER
}
accPppBncpConfigIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of ifIndex that identifies the entry
in the interface table that is associated with
the local PPP Bridging NCP entity."
::= { accPppBncpConfigEntry 1 }
accPppBncpConfigTinygram OBJECT-TYPE
SYNTAX INTEGER { false(1), true(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If false then the local BNCP entity will not
initiate the Tinygram Compression Option
Negotiation. If true then the local BNCP entity
will initiate negotiation of this option."
DEFVAL { true }
::= { accPppBncpConfigEntry 2 }
accPppBncpConfigRingId OBJECT-TYPE
SYNTAX INTEGER { false(1), true(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If false then the local PPP Entity will not
initiate a Remote Ring Identification Option
negotiation. If true then the local PPP entity
will intiate this negotiation. This MIB object
is relevant only if the interface is for 802.5
Token Ring bridging."
DEFVAL { false }
::= { accPppBncpConfigEntry 3 }
accPppBncpConfigLineId OBJECT-TYPE
SYNTAX INTEGER { false(1), true(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If false then the local PPP Entity is not to
initiate a Line Identification Option
negotiation. If true then the local PPP entity
will intiate this negotiation. This MIB object
is relevant only if the interface is for 802.5
Token Ring bridging."
DEFVAL { false }
::= { accPppBncpConfigEntry 4 }
accPppBncpConfigLanId OBJECT-TYPE
SYNTAX INTEGER { false(1), true(2) }
ACCESS read-write
STATUS mandatory
DESCRIPTION
"If false then the local BNCP entity will not
initiate the LAN Identification Option
Negotiation. If true then the local BNCP entity
will initiate negotiation of this option."
DEFVAL { false }
::= { accPppBncpConfigEntry 5 }
-- Translation Bridging Group
accXBr OBJECT IDENTIFIER ::= { accBRG 34 }
accXBridge OBJECT IDENTIFIER ::= { accXBr 1 }
accXBridgeStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled(1),
disabled(2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Status of translation bridging."
::= { accXBridge 1 }
accXBridgeRingId OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS mandatory
DESCRIPTION
" Translation bridging ring ID."
::= { accXBridge 2 }
-- Basic Rate ISDN Group
accIsdn OBJECT IDENTIFIER ::= { accBRG 36 }
-- The IsdnDsl Group
accIsdnDsl OBJECT IDENTIFIER ::= { accIsdn 1 }
-- Configuration and operational parameters maintained and
-- reported on a per-terminal (bridge/router) basis.
accIsdnDslIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" An index instantiating a particular digital subscriber
loop interface on this bridge/router terminal."
::= { accIsdnDsl 1 }
-- The IsdnSub Group
accIsdnSub OBJECT IDENTIFIER ::= { accIsdn 2 }
-- Configuration and operational parameters maintained and
-- reported on a per-subscriber interface basis.
accIsdnSubTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIsdnSubEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" ISDN subscriber table containing configuration and
operational parameters for all ISDN subscriber
interfaces on this bridge/router terminal."
::= { accIsdnSub 1 }
accIsdnSubEntry OBJECT-TYPE
SYNTAX AccIsdnSubEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Configuration and operational parameters for a
particular ISDN subscriber interface."
INDEX { accIsdnDslIndex }
::= { accIsdnSubTable 1 }
AccIsdnSubEntry ::= SEQUENCE {
accIsdnSubSwitchType INTEGER,
accIsdnSubChannelMode INTEGER,
accIsdnSubAdminStatus INTEGER,
accIsdnSubDiagLevel INTEGER,
accIsdnSubManualTei INTEGER
}
accIsdnSubSwitchType OBJECT-TYPE
SYNTAX INTEGER {
bri-net3(1),
bri-5ess(2),
bri-dms100(3),
bri-vn2(4),
bri-vn3(5),
bri-kdd(6),
bri-ntt(7),
bri-1tr6(8),
bri-ni1(9),
bri-ccitt(10)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The particular type of central-office switch
providing access to the ISDN network and to
which this subscriber interface is connected."
::= { accIsdnSubEntry 1 }
accIsdnSubChannelMode OBJECT-TYPE
SYNTAX INTEGER {
cm-1b-plus-d(1),
cm-2b-plus-d(2),
cm-1h-plus-d(3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The ISDN channel configuration mode."
::= { accIsdnSubEntry 2 }
accIsdnSubAdminStatus OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The administrative status of this subscriber
interface."
::= { accIsdnSubEntry 3 }
accIsdnSubDiagLevel OBJECT-TYPE
SYNTAX INTEGER (0..5)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The current diagnostic message level for this
subscriber interface."
::= { accIsdnSubEntry 4 }
accIsdnSubManualTei OBJECT-TYPE
SYNTAX INTEGER (0..63
--, 127
)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The TEI (terminal endpoint identifier) when manual
TEI assignment is required. Setting this value
between 0 and 63 (inclusive) specifies manual TEI
assignment using the indicated value. Setting
this value to 127 (the broadcast TEI) specifies
automatic TEI assignment."
::= { accIsdnSubEntry 5 }
-- The IsdnStat Group
accIsdnStat OBJECT IDENTIFIER ::= { accIsdn 3 }
-- Statistics and operational status maintained and
-- reported on a per-subscriber interface basis.
accIsdnStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIsdnStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Statistics and operational status maintained for all
ISDN subscriber interfaces on this bridge/router
terminal."
::= { accIsdnStat 1 }
accIsdnStatEntry OBJECT-TYPE
SYNTAX AccIsdnStatEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Statistics and operational status for a particular
ISDN subscriber interface."
INDEX { accIsdnDslIndex }
::= { accIsdnStatTable 1 }
AccIsdnStatEntry ::= SEQUENCE {
accIsdnStatHdlcInPackets Counter,
accIsdnStatHdlcInOctets Counter,
accIsdnStatHdlcInErrors Counter,
accIsdnStatHdlcInDiscs Counter,
accIsdnStatHdlcOutPackets Counter,
accIsdnStatHdlcOutOctets Counter,
accIsdnStatHdlcOutErrors Counter,
accIsdnStatHdlcOutDiscs Counter,
accIsdnStatLapdUnsolicResps Counter,
accIsdnStatLapdPeerSabmes Counter,
accIsdnStatLapdN200Errors Counter,
accIsdnStatLapdNrSeqErrors Counter,
accIsdnStatLapdRecvdFrmrs Counter,
accIsdnStatLapdCntlErrors Counter,
accIsdnStatLapdInfoErrors Counter,
accIsdnStatLapdWrongSizes Counter,
accIsdnStatLapdN201Errors Counter,
accIsdnStatCallsOriginateds Counter,
accIsdnStatCallsOfferreds Counter,
accIsdnStatCallsAnswereds Counter,
accIsdnStatCallsAccepteds Counter,
accIsdnStatCallsCompleteds Counter,
accIsdnStatCallsCleareds Counter,
accIsdnStatDslOperStatus INTEGER,
accIsdnStatLastCauses INTEGER
}
accIsdnStatHdlcInPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets received on the D-channel
of this subscriber interface."
::= { accIsdnStatEntry 1 }
accIsdnStatHdlcInOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of octets received on the D-channel
of this subscriber interface."
::= { accIsdnStatEntry 2 }
accIsdnStatHdlcInErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of input hardware errors counted by
the D-channel input/output driver."
::= { accIsdnStatEntry 3 }
accIsdnStatHdlcInDiscs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of input packets discarded by the
D-channel input/output driver."
::= { accIsdnStatEntry 4 }
accIsdnStatHdlcOutPackets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of packets transmitted on the D-channel
of this subscriber interface."
::= { accIsdnStatEntry 5 }
accIsdnStatHdlcOutOctets OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of octets transmitted on the D-channel
of this subscriber interface."
::= { accIsdnStatEntry 6 }
accIsdnStatHdlcOutErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of output hardware errors counted by
the D-channel input/output driver."
::= { accIsdnStatEntry 7 }
accIsdnStatHdlcOutDiscs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of output packets discarded by the
D-channel input/output driver."
::= { accIsdnStatEntry 8 }
accIsdnStatLapdUnsolicResps OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of unsolicited LAPD response frames
received on all data links associated with the
D-channel of this subscriber interface."
::= { accIsdnStatEntry 9 }
accIsdnStatLapdPeerSabmes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of peer SABME frames received on all
data links associated with the D-channel of this
subscriber interface."
::= { accIsdnStatEntry 10 }
accIsdnStatLapdN200Errors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of unsuccessful T200 timer recoveries
after a frame has been retransmitted N200 times."
::= { accIsdnStatEntry 11 }
accIsdnStatLapdNrSeqErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of N(R) sequence errors."
::= { accIsdnStatEntry 12 }
accIsdnStatLapdRecvdFrmrs OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of LAPD FRMR response frames received."
::= { accIsdnStatEntry 13 }
accIsdnStatLapdCntlErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of LAPD frames received with an invalid
or non-implemented control field."
::= { accIsdnStatEntry 14 }
accIsdnStatLapdInfoErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of LAPD frames received with a
non-permitted information (I) field."
::= { accIsdnStatEntry 15 }
accIsdnStatLapdWrongSizes OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of LAPD frames received which were the
wrong size."
::= { accIsdnStatEntry 16 }
accIsdnStatLapdN201Errors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of LAPD frames received which contained
and information field which exceeded N201."
::= { accIsdnStatEntry 17 }
accIsdnStatCallsOriginateds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of outgoing calls originated on this
subscriber interface."
::= { accIsdnStatEntry 18 }
accIsdnStatCallsOfferreds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of incoming calls offerred on this
subscriber interface."
::= { accIsdnStatEntry 19 }
accIsdnStatCallsAnswereds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of outgoing calls originated on this
subscriber interface which were answered by the
destination."
::= { accIsdnStatEntry 20 }
accIsdnStatCallsAccepteds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of incoming calls offerred on this
subscriber interface which were accepted for
connection."
::= { accIsdnStatEntry 21 }
accIsdnStatCallsCompleteds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of outgoing and incoming calls
completed (that is, the number of calls which
were successfully connected)."
::= { accIsdnStatEntry 22 }
accIsdnStatCallsCleareds OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The number of outgoing and incoming calls
cleared."
::= { accIsdnStatEntry 23 }
accIsdnStatDslOperStatus OBJECT-TYPE
SYNTAX INTEGER {
inactive(1), -- layer-1 deactivated
waiting(2), -- awaiting activation
activated(3), -- layer-1 activated
established(4) -- multi-frame established
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The operation status of this interface."
::= { accIsdnStatEntry 24 }
accIsdnStatLastCauses OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The last cause value sent or received on this
subscriber interface."
::= { accIsdnStatEntry 25 }
-- The IsdnCall Group
accIsdnCall OBJECT IDENTIFIER ::= { accIsdn 4 }
-- Parameters and operational status maintained and
-- reported on a per-call basis.
accIsdnCallTable OBJECT-TYPE
SYNTAX SEQUENCE OF AccIsdnCallEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Parameters and operational status for ISDN calls
active on this bridge/router terminal."
::= { accIsdnCall 1 }
accIsdnCallEntry OBJECT-TYPE
SYNTAX AccIsdnCallEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
" Parameters and operational status for a particular
ISDN call which is presently active or is in the
process of being established or cleared."
INDEX { accIsdnCallDslIndex, accIsdnCallIdentifier }
::= { accIsdnCallTable 1 }
AccIsdnCallEntry ::= SEQUENCE {
accIsdnCallIdentifier INTEGER,
accIsdnCallReference INTEGER,
accIsdnCallChannelId INTEGER,
accIsdnCallIfIndex INTEGER,
accIsdnCallInfoRate INTEGER,
accIsdnCallState INTEGER,
accIsdnCallCause INTEGER,
accIsdnCallOrigin INTEGER,
accIsdnCallAddress OCTET STRING,
accIsdnCallDslIndex INTEGER
}
accIsdnCallIdentifier OBJECT-TYPE
SYNTAX INTEGER (0..65536)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The internal call control identifier for this call."
::= { accIsdnCallEntry 1 }
accIsdnCallReference OBJECT-TYPE
SYNTAX INTEGER (1..32767)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The Q.931 call reference value for this call."
::= { accIsdnCallEntry 2 }
accIsdnCallChannelId OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- no channel allocated
b1(2), -- B1
b2(3), -- B2
h0(4) -- hyperchannel (B1 + B2)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The bearer channel interface ID allocated for this
call."
::= { accIsdnCallEntry 3 }
accIsdnCallIfIndex OBJECT-TYPE
SYNTAX INTEGER {
j1(1), -- J1
j2(2) -- J2
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interface index of the physical port connected
by the bearer channel."
::= { accIsdnCallEntry 4 }
accIsdnCallInfoRate OBJECT-TYPE
SYNTAX INTEGER {
packet(1),
r-64k(17),
r-2x64k(18),
r-384k(20),
r-1536k(22),
r-1920k(24)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The information transfer rate."
::= { accIsdnCallEntry 5 }
accIsdnCallState OBJECT-TYPE
SYNTAX INTEGER {
disconnected(1),
incoming(2),
outgoing(3),
routing(4),
releaseing(5),
connected(6)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The current call control state (not Q.931)."
::= { accIsdnCallEntry 6 }
accIsdnCallCause OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The last cause value associated with this call."
::= { accIsdnCallEntry 7 }
accIsdnCallOrigin OBJECT-TYPE
SYNTAX INTEGER {
none(1), -- not yet originated
terminal(2), -- outgoing (TE-to-NT)
network(3) -- incoming (NT-to_TE)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The originator of the call."
::= { accIsdnCallEntry 8 }
accIsdnCallAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The remote call address associated with this call.
For incoming calls, this is the calling ISDN address.
For outgoing calls, this is the called ISDN address."
::= { accIsdnCallEntry 9 }
accIsdnCallDslIndex OBJECT-TYPE
SYNTAX INTEGER (1..255)
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The interface index for the digital subscriber loop."
::= { accIsdnCallEntry 10 }
-- The IsdnTest Group
accIsdnTest OBJECT IDENTIFIER ::= { accIsdn 5 }
-- Parameters and commands maintained and reported on a
-- per-terminal basis used for controlling homologation
-- testing.
accIsdnTestIfIndex OBJECT-TYPE
SYNTAX INTEGER {
j1(1), -- J1
j2(2) -- J2
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The interface index for the physical port from
which a call will be made."
::= { accIsdnTest 1 }
accIsdnTestAddress OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The ISDN destination call address."
::= { accIsdnTest 2 }
accIsdnTestCommand OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
accept(2),
reject(3),
ignore(4),
call(5),
clear(6),
disconnect(7),
loop(8),
unloop(9),
activate(10),
deactivate(11),
display(12)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The action to be performed."
::= { accIsdnTest 3 }
accIsdnTestProceed OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
accept(2),
reject(3),
ignore(4)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
" The action to be performed for incoming calls."
::= { accIsdnTest 4 }
accIsdnTestRegName OBJECT-TYPE
SYNTAX INTEGER (0..31)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The name of the MC145474 register to write.
nr0(0),
nr1(1),
nr2(2),
nr3(3),
nr4(4),
nr5(5),
nr6(6),
br0(16),
br1(17),
br2(18),
br3(19),
br4(20),
br5(21),
br6(22),
br7(23),
br8(24),
br9(25),
br10(26),
br11(27),
br12(28),
br13(29),
br14(30),
br15(31)
"
::= { accIsdnTest 5 }
accIsdnTestRegValue OBJECT-TYPE
SYNTAX INTEGER (0..255)
ACCESS read-write
STATUS mandatory
DESCRIPTION
" The value to write to the MC145474 register."
::= { accIsdnTest 6 }
END
|