| Hi,
I'm trying to setup a MCC environment on a VMS system. During the
installation of the MCCELMAM I received the MCC-E-EVT_POOL_INSRES,
insufficient resources to create/access event pool error message.
I then tried to run the MCC_AUDIT.COM to see if it would figure out
what to fix. It seemed to find everything in order... I then checked
the release notes as directed in this note... My guess is that I didn't
have enough free gblpages (only 872...)? Shouldn't the audit procedure
check this???
The logfile of what I did is appended...
What causes the warning messages about Duplicate Key: 2PAPA
and
unable to find parent messages in the installation procedure?
Thanks,
rick
Username: SYSTEM
Password:
Welcome to VAX/VMS version T5.5-2E7 on node MKART4
Last interactive login on Sunday, 9-AUG-1992 15:07
Last non-interactive login on Sunday, 9-AUG-1992 15:41
MKART4-> @sys$update:vmsinstal MCCELMAM DKB0:[DECMCC]
VAX/VMS Software Product Installation Procedure T5.5-2E7
It is 9-AUG-1992 at 15:47.
Enter a question mark (?) at any time for help.
%VMSINSTAL-W-ACTIVE, The following processes are still active:
DNS$TA
DNS$BACK
* Do you want to continue anyway [NO]? y
* Are you satisfied with the backup of your system disk [YES]? y
The following products will be processed:
MCCELMAM V1.2
Beginning installation of MCCELMAM V1.2 at 15:47
%VMSINSTAL-I-RESTORE, Restoring product save set A ...
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.
************************************************************
* *
* DECmcc Extended LAN Manager AM *
* V1.2 *
* *
* Installation Procedure *
* *
************************************************************
Checking for proper DECmcc version...
DECmcc (V1.2.0)
Product: DECMCC-ELM-AM-V
Producer: DEC
Version: 1.2
Release Date: 16-FEB-1992
* Does this product have an authorization key registered and loaded? y
* Do you want to run the DECMCC ELM AM IVP after the installation [YES]?
* Do you want to purge files replaced by this installation [YES]?
VMSINSTAL asks no additional questions.
%VMSINSTAL-I-RESTORE, Restoring product save set B ...
Following the copying of the files, the DECmcc ELM AM
start-up command procedure(s) will be invoked. Operational
tables will be created by this procedure.
To automatically set up DECmcc ELM AM on your system,
edit your local system start-up command procedure
SYS$MANAGER:SYSTARTUP_V5.COM
so that it invokes the DECmcc ELM AM start-up command
procedure. Add:
@SYS$STARTUP:MCC_STARTUP_ELM_AM.COM
after the statement that invokes the DECmcc BMS start-up
command file (MCC_STARTUP_BMS.COM), or the DECmcc Director
start-up command file (MCC_STARTUP_DIR.COM).
Following the DECmcc ELM AM start-up the DECmcc ELM AM
post install command procedure will be invoked.
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Beginning DECmcc ELM AM Post Installation Procedure ...
*******************************************************************
* This next section of the installation procedure will update *
* the MCC Dictionary. This process could take up to 2 hours. *
*******************************************************************
%DAP-S-USE_DICT, Using dictionary file: sys$common:[mcc]mcc_fdictionary.dat;1
DECmcc Dictionary Administrator Program Version V1.2.0
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 21%
Percent of file processed = 26%
Percent of file processed = 31%
Percent of file processed = 36%
Percent of file processed = 41%
Percent of file processed = 46%
Percent of file processed = 51%
Percent of file processed = 56%
Percent of file processed = 61%
Percent of file processed = 66%
Percent of file processed = 71%
Percent of file processed = 77%
Percent of file processed = 82%
Percent of file processed = 87%
Percent of file processed = 92%
Percent of file processed = 97%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 50%
Percent of file processed = 55%
Percent of file processed = 60%
Percent of file processed = 65%
Percent of file processed = 70%
Percent of file processed = 75%
Percent of file processed = 80%
Percent of file processed = 85%
Percent of file processed = 90%
Percent of file processed = 95%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 50%
Percent of file processed = 55%
Percent of file processed = 60%
Percent of file processed = 65%
Percent of file processed = 70%
Percent of file processed = 75%
Percent of file processed = 80%
Percent of file processed = 85%
Percent of file processed = 90%
Percent of file processed = 95%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 51%
Percent of file processed = 56%
Percent of file processed = 61%
Percent of file processed = 66%
Percent of file processed = 71%
Percent of file processed = 76%
Percent of file processed = 81%
Percent of file processed = 86%
Percent of file processed = 91%
Percent of file processed = 96%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 50%
Percent of file processed = 55%
Percent of file processed = 60%
Percent of file processed = 66%
Percent of file processed = 71%
Percent of file processed = 76%
Percent of file processed = 81%
Percent of file processed = 86%
Percent of file processed = 91%
Percent of file processed = 96%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 51%
Percent of file processed = 56%
Percent of file processed = 61%
Percent of file processed = 66%
Percent of file processed = 71%
Percent of file processed = 76%
Percent of file processed = 81%
Percent of file processed = 86%
Percent of file processed = 91%
Percent of file processed = 96%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 50%
Percent of file processed = 56%
Percent of file processed = 61%
Percent of file processed = 66%
Percent of file processed = 71%
Percent of file processed = 76%
Percent of file processed = 81%
Percent of file processed = 86%
Percent of file processed = 91%
Percent of file processed = 96%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 50%
Percent of file processed = 56%
Percent of file processed = 61%
Percent of file processed = 66%
Percent of file processed = 71%
Percent of file processed = 76%
Percent of file processed = 81%
Percent of file processed = 86%
Percent of file processed = 91%
Percent of file processed = 96%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 11%
Percent of file processed = 16%
Percent of file processed = 21%
Percent of file processed = 26%
Percent of file processed = 32%
Percent of file processed = 37%
Percent of file processed = 43%
Percent of file processed = 48%
Percent of file processed = 53%
Percent of file processed = 59%
Percent of file processed = 65%
Percent of file processed = 70%
Percent of file processed = 76%
Percent of file processed = 81%
Percent of file processed = 86%
Percent of file processed = 92%
Percent of file processed = 97%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 36%
Percent of file processed = 41%
Percent of file processed = 46%
Percent of file processed = 51%
Percent of file processed = 56%
Percent of file processed = 61%
Percent of file processed = 66%
Percent of file processed = 71%
Percent of file processed = 77%
Percent of file processed = 82%
Percent of file processed = 87%
Percent of file processed = 92%
Percent of file processed = 97%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 50%
Percent of file processed = 55%
Percent of file processed = 60%
Percent of file processed = 65%
Percent of file processed = 70%
Percent of file processed = 75%
Percent of file processed = 80%
Percent of file processed = 85%
Percent of file processed = 90%
Percent of file processed = 95%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 26%
Percent of file processed = 31%
Percent of file processed = 36%
Percent of file processed = 41%
Percent of file processed = 46%
Percent of file processed = 51%
Percent of file processed = 56%
Percent of file processed = 61%
Percent of file processed = 66%
Percent of file processed = 71%
Percent of file processed = 76%
Percent of file processed = 81%
Percent of file processed = 87%
Percent of file processed = 92%
Percent of file processed = 97%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 36%
Percent of file processed = 41%
Percent of file processed = 46%
Percent of file processed = 51%
Percent of file processed = 56%
Percent of file processed = 61%
Percent of file processed = 66%
Percent of file processed = 71%
Percent of file processed = 77%
Percent of file processed = 82%
Percent of file processed = 87%
Percent of file processed = 92%
Percent of file processed = 97%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 50%
Percent of file processed = 55%
Percent of file processed = 60%
Percent of file processed = 65%
Percent of file processed = 70%
Percent of file processed = 75%
Percent of file processed = 80%
Percent of file processed = 85%
Percent of file processed = 90%
Percent of file processed = 95%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 6%
Percent of file processed = 11%
Percent of file processed = 16%
Percent of file processed = 21%
Percent of file processed = 27%
Percent of file processed = 32%
Percent of file processed = 37%
Percent of file processed = 42%
Percent of file processed = 47%
Percent of file processed = 53%
Percent of file processed = 58%
Percent of file processed = 63%
Percent of file processed = 68%
Percent of file processed = 74%
Percent of file processed = 79%
Percent of file processed = 84%
Percent of file processed = 89%
Percent of file processed = 94%
Percent of file processed = 99%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 20%
Percent of file processed = 25%
Percent of file processed = 30%
Percent of file processed = 35%
Percent of file processed = 40%
Percent of file processed = 45%
Percent of file processed = 50%
Percent of file processed = 55%
Percent of file processed = 60%
Percent of file processed = 65%
Percent of file processed = 70%
Percent of file processed = 75%
Percent of file processed = 80%
Percent of file processed = 85%
Percent of file processed = 90%
Percent of file processed = 95%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Using parse table log file: sys$common:[mcc]mcc_fdictionary.log;1
Reading parse table file: sys$common:[mcc]mcc_fdictionary.bpt;1
Please wait while parse tables are updated
Processing entity
7
1
Processing entity
7
1
5
Processing entity
7
33
Processing entity
7
6
Processing entity
7
302
Processing entity
7
35
Processing entity
8
5
Processing entity
8
600
Processing entity
8
601
Processing entity
8
604
Processing entity
8
602
Processing entity
8
603
Processing entity
9
Processing entity
9
11
Processing entity
9
11
44
Processing entity
9
11
45
Processing entity
9
11
46
Processing entity
9
12
Processing entity
9
21
Processing entity
9
21
37
Processing entity
9
21
48
Processing entity
9
21
49
Processing entity
9
47
Processing entity
330
Processing entity
330
1
Processing entity
330
2
Processing entity
37
Processing entity
37
1
Processing entity
37
2
Processing entity
37
3
Writing parse table file. Please wait...
Created parse table file: sys$common:[mcc]mcc_fdictionary.bpt;2
Parse table build complete.
DECmcc Help File Builder
Component Version: V1.2.0
Cleaning up any intermediate files...
Processing file SYS$COMMON:[MCC]MCC_ALARMS_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_BRIDGE_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_CIRCUIT_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_COLLECTION_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_CONC_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_DNA4_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_DNA5AM_HELP.HELP
Processing file SYS$COMMON:[MCC]MCC_DOMAIN_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_ENET_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_EXPORTER_HELP.HELP
Processing file SYS$COMMON:[MCC]MCC_FDDI_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_GENERAL_HELP.HELP
Processing file SYS$COMMON:[MCC]MCC_HISTORIAN_HELP.HELP
Processing file SYS$COMMON:[MCC]MCC_KERNEL_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_NOTIFICATION_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_PA_BRIDGE_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_PA_FM.HELP
Warning - Duplicate Key: 2PAPA
Warning - Duplicate Key: 2PAPAzCHAR
Warning - Duplicate Key: 2PAPAzCHARzCOMPONENTzIDENTIFICATION
Warning - Duplicate Key: 2PAPAzCHARzCOMPONENTzVERSION
Warning - Duplicate Key: 2PAPAzSHOW
Warning - Duplicate Key: 2PAPAzSHOWzCHAR
Warning - Duplicate Key: 2PAPAzTEST
Warning - Duplicate Key: 2PAPAzTESTzEXAMPLES
Processing file SYS$COMMON:[MCC]MCC_TCPIP_AM.HELP
Sorting character cell help topics.
Sorting windows help topics.
Verifying hierarchy...
Verifying for character cell
Unable to find parent topic <Logical_station>, for <ENTITY DECnet_OSI Node HDLC Link Logical_station Statistics COUNT_OF_RNRs_GENERATED> topic
Unable to find parent topic <NEIGHTABLE>, for <ENTITY SNMP EGP NEIGHTABLE STATISTICS> topic
Unable to find parent topic <INTERFACE>, for <ENTITY SNMP INTERFACE STATISTICS> topic
Unable to find parent topic <WALKTHROUGH>, for <TUTORIAL MCC PA WALKTHROUGH SHOW> topic
Verifying for windows
Unable to find parent topic <Logical_station>, for <ENTITY DECnet_OSI Node HDLC Link Logical_station Statistics COUNT_OF_RNRs_GENERATED> topic
Unable to find parent topic <NEIGHTABLE>, for <ENTITY SNMP EGP NEIGHTABLE STATISTICS> topic
Unable to find parent topic <INTERFACE>, for <ENTITY SNMP INTERFACE STATISTICS> topic
Unable to find parent topic <WALKTHROUGH>, for <TUTORIAL MCC PA WALKTHROUGH SHOW> topic
Processing file(s)....
MCC help files updated.
MCC help files updated.
Cleaning up any intermediate files...
The MCC_STARTUP_ELM_AM startup procedure for DECmcc V1.2 is now running.
Note: The DECmcc Director or BMS Startup procecures
should be run prior to executing this procedure.
DECmcc (V1.2.0)
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-I-ENRDUPLENTRY, enrollment successful; duplicate entries found and replaced
%MCC-E-EVT_POOL_INSRES, insufficient resources to create/access event pool
MCC 0 ALARMS RULE __dummy_test
AT 9-AUG-1992 17:39:29
Software logic error detected
MCC Routine Error =
%MCC-E-EVT_POOL_INSRES, insufficient
resources to create/access event pool
The MCC_STARTUP_ELM_AM startup procedure for DECmcc V1.2 is now ending.
Completing DECmcc ELM AM Post Installation Procedure ...
Beginning DECmcc ELM AM Installation Verification Procedure
The IVP for DECmcc ELM AM V1.2 will now be run.
DECmcc (V1.2.0)
MCC 0 ALARMS
AT 9-AUG-1992 17:39:42
Test successful.
DECmcc (V1.2.0)
MCC 0 PA
AT 9-AUG-1992 17:39:53
Test Successful
DECmcc (V1.2.0)
MCC 0 BRIDGE_AM
AT 9-AUG-1992 17:40:03
Test successful.
DECmcc (V1.2.0)
MCC 0 CONC_AM
AT 9-AUG-1992 17:40:14
Test successful.
DECmcc (V1.2.0)
MCC 0 FDDI_AM
AT 9-AUG-1992 17:40:25
Test successful.
DECmcc ELM AM V1.2 Installation Successful
Completing DECmcc ELM AM Installation Verification Procedure
Installation of MCCELMAM V1.2 completed at 17:40
VMSINSTAL procedure done at 17:40
MKART4->
MKART4-> @MCC_AUDIT.COM;1
MCC_AUDIT X1.2.21 9-AUG-1992 17:41:06.94,
on node MKART4::, a VAXstation 3100/GPX, running VMS T5.5-2E7
Checking Process Quotas
- No process quotas found to be too small for user SYSTEM
Checking Sysgen Parameters.
- No Active Sysgen parameters found to be too small.
Checking installed images
Checking Disk Space
MCC_COMMON:
SYS$LOGIN:
SYS$SYSDEVICE:
Checking Memory
Checking Pagefile Size
Checking DNS Client Version
Audit Complete
Process and Sysgen changes written to MCC_AUDIT_FIX.TXT
Log of this run of MCC_AUDIT written to MCC_AUDIT_LOG.TXT
MKART4-> set def sys$login
MKART4-> ty MCC_AUDIT_LOG.TXT
MCC_AUDIT X1.2.21 9-AUG-1992 17:41:07.23,
on node MKART4::, a VAXstation 3100/GPX, running VMS T5.5-2E7
Checking Process Quotas
- No process quotas found to be too small for user SYSTEM
Checking Sysgen Parameters.
- No Active Sysgen parameters found to be too small.
Checking installed images
Checking Disk Space
MCC_COMMON:
SYS$LOGIN:
SYS$SYSDEVICE:
Checking Memory
Checking Pagefile Size
Checking DNS Client Version
Audit Complete
MKART4-> ty MCC_AUDIT_FIX.TXT
MKART4-> instal
INSTALL> list /glob/sum
Summary of Local Memory Global Sections
389 Global Sections Used, 46128/872 Global Pages Used/Unused
INSTALL> exit
MKART4-> mc sysgen
SYSGEN> USE CURRENT
SYSGEN> SHOW GBLSEC
Parameter Name Current Default Min. Max. Unit Dynamic
-------------- ------- ------- ------- ------- ---- -------
GBLSECTIONS 1000 250 60 4095 Sections
SYSGEN> EXIT
MKART4->
MKART4-> !*******************************************************************
MKART4-> @sys$update:vmsinstal MCCELMfm DKB0:[DECMCC]
VAX/VMS Software Product Installation Procedure T5.5-2E7
It is 9-AUG-1992 at 17:43.
Enter a question mark (?) at any time for help.
%VMSINSTAL-W-ACTIVE, The following processes are still active:
DNS$TA
DNS$BACK
* Do you want to continue anyway [NO]? y
* Are you satisfied with the backup of your system disk [YES]?
The following products will be processed:
MCCELMFM V1.2
Beginning installation of MCCELMFM V1.2 at 17:43
%VMSINSTAL-I-RESTORE, Restoring product save set A ...
%VMSINSTAL-I-RELMOVED, Product's release notes have been moved to SYS$HELP.
************************************************************
* *
* DECmcc Extended LAN Manager FM *
* V1.2 *
* *
* Installation Procedure *
* *
************************************************************
Checking for proper DECmcc version...
DECmcc (V1.2.0)
************************************************************
* *
* DECmcc BMS License Confirmed *
* *
************************************************************
* Do you want to run the DECMCC ELM FM IVP after the installation [YES]?
* Do you want to purge files replaced by this installation [YES]?
VMSINSTAL asks no additional questions.
%VMSINSTAL-I-RESTORE, Restoring product save set B ...
Following the copying of the files, the DECmcc ELM FM
start-up command procedure(s) will be invoked. Operational
tables will be created by this procedure.
To automatically set up DECmcc ELM FM on your system,
edit your local system start-up command procedure
SYS$MANAGER:SYSTARTUP_V5.COM
so that it invokes the DECmcc ELM FM start-up command
procedure. Add:
@SYS$STARTUP:MCC_STARTUP_ELM_FM.COM
after the statement that invokes the DECmcc BMS start-up
command file (MCC_STARTUP_BMS.COM), or the DECmcc Director
start-up command file (MCC_STARTUP_DIR.COM).
Following the DECmcc ELM FM start-up the DECmcc ELM FM
post install command procedure will be invoked.
%VMSINSTAL-I-MOVEFILES, Files will now be moved to their target directories...
Beginning DECmcc ELM FM Post Installation Procedure ...
*******************************************************************
* This next section of the installation procedure will update *
* the MCC Dictionary. This process could take up to 2 hours. *
*******************************************************************
%DAP-S-USE_DICT, Using dictionary file: sys$common:[mcc]mcc_fdictionary.dat;1
DECmcc Dictionary Administrator Program Version V1.2.0
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 21%
Percent of file processed = 26%
Percent of file processed = 31%
Percent of file processed = 36%
Percent of file processed = 41%
Percent of file processed = 47%
Percent of file processed = 52%
Percent of file processed = 57%
Percent of file processed = 62%
Percent of file processed = 67%
Percent of file processed = 72%
Percent of file processed = 77%
Percent of file processed = 83%
Percent of file processed = 88%
Percent of file processed = 93%
Percent of file processed = 98%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 21%
Percent of file processed = 26%
Percent of file processed = 31%
Percent of file processed = 36%
Percent of file processed = 41%
Percent of file processed = 46%
Percent of file processed = 52%
Percent of file processed = 57%
Percent of file processed = 62%
Percent of file processed = 67%
Percent of file processed = 72%
Percent of file processed = 78%
Percent of file processed = 83%
Percent of file processed = 88%
Percent of file processed = 93%
Percent of file processed = 98%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Deleting specified class from dictionary file...
(Control C and Y will be disabled while records are being deleted)
Percent of file processed = 5%
Percent of file processed = 10%
Percent of file processed = 15%
Percent of file processed = 21%
Percent of file processed = 26%
Percent of file processed = 31%
Percent of file processed = 36%
Percent of file processed = 41%
Percent of file processed = 46%
Percent of file processed = 52%
Percent of file processed = 57%
Percent of file processed = 62%
Percent of file processed = 67%
Percent of file processed = 72%
Percent of file processed = 78%
Percent of file processed = 83%
Percent of file processed = 88%
Percent of file processed = 93%
Percent of file processed = 98%
Percent of file processed = 100%
Now writing processed records to dictionary file...
(Control C and Y will be disabled while records are being written)
Using parse table log file: sys$common:[mcc]mcc_fdictionary.log;2
Reading parse table file: sys$common:[mcc]mcc_fdictionary.bpt;2
Please wait while parse tables are updated
Processing entity
7
37
Processing entity
7
36
Processing entity
7
18
500
38
Writing parse table file. Please wait...
Created parse table file: sys$common:[mcc]mcc_fdictionary.bpt;3
Parse table build complete.
DECmcc Help File Builder
Component Version: V1.2.0
Cleaning up any intermediate files...
Processing file SYS$COMMON:[MCC]MCC_ALARMS_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_BRIDGE_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_CIRCUIT_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_COLLECTION_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_CONC_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_DNA4_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_DNA5AM_HELP.HELP
Processing file SYS$COMMON:[MCC]MCC_DOMAIN_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_ENET_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_EXPORTER_HELP.HELP
Processing file SYS$COMMON:[MCC]MCC_FDDI_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_FDDI_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_GENERAL_HELP.HELP
Processing file SYS$COMMON:[MCC]MCC_HISTORIAN_HELP.HELP
Processing file SYS$COMMON:[MCC]MCC_KERNEL_AM.HELP
Processing file SYS$COMMON:[MCC]MCC_NOTIFICATION_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_PA_BRIDGE_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_PA_FM.HELP
Warning - Duplicate Key: 2PAPA
Warning - Duplicate Key: 2PAPAzCHAR
Warning - Duplicate Key: 2PAPAzCHARzCOMPONENTzIDENTIFICATION
Warning - Duplicate Key: 2PAPAzCHARzCOMPONENTzVERSION
Warning - Duplicate Key: 2PAPAzSHOW
Warning - Duplicate Key: 2PAPAzSHOWzCHAR
Warning - Duplicate Key: 2PAPAzTEST
Warning - Duplicate Key: 2PAPAzTESTzEXAMPLES
Processing file SYS$COMMON:[MCC]MCC_STM_FM.HELP
Processing file SYS$COMMON:[MCC]MCC_TCPIP_AM.HELP
Sorting character cell help topics.
Sorting windows help topics.
Verifying hierarchy...
Verifying for character cell
Unable to find parent topic <Logical_station>, for <ENTITY DECnet_OSI Node HDLC Link Logical_station Statistics COUNT_OF_RNRs_GENERATED> topic
Unable to find parent topic <NEIGHTABLE>, for <ENTITY SNMP EGP NEIGHTABLE STATISTICS> topic
Unable to find parent topic <INTERFACE>, for <ENTITY SNMP INTERFACE STATISTICS> topic
Unable to find parent topic <WALKTHROUGH>, for <TUTORIAL MCC PA WALKTHROUGH SHOW> topic
Verifying for windows
Unable to find parent topic <Logical_station>, for <ENTITY DECnet_OSI Node HDLC Link Logical_station Statistics COUNT_OF_RNRs_GENERATED> topic
Unable to find parent topic <NEIGHTABLE>, for <ENTITY SNMP EGP NEIGHTABLE STATISTICS> topic
Unable to find parent topic <INTERFACE>, for <ENTITY SNMP INTERFACE STATISTICS> topic
Unable to find parent topic <WALKTHROUGH>, for <TUTORIAL MCC PA WALKTHROUGH SHOW> topic
Processing file(s)....
MCC help files updated.
MCC help files updated.
Cleaning up any intermediate files...
The MCC_STARTUP_ELM_FM startup procedure for DECmcc V1.2 is now running.
Note: The DECmcc Director or BMS Startup procecures
should be run prior to executing this procedure.
DECmcc (V1.2.0)
The MCC_STARTUP_ELM_FM startup procedure for DECmcc V1.2 is now ending.
Completing DECmcc ELM FM Post Installation Procedure ...
Beginning DECmcc ELM FM Installation Verification Procedure
The IVP for DECmcc ELM FM V1.2 will now be run.
DECmcc (V1.2.0)
MCC 0 STM_FM
AT 9-AUG-1992 17:58:40
Test successful.
DECmcc (V1.2.0)
MCC 0 FDDI_FM
AT 9-AUG-1992 17:58:53
Test successful.
DECmcc (V1.2.0)
MCC 0 ICONICMAP APPLICATION LAN_TOPOLOGY_PM
AT 9-AUG-1992 17:59:06
Test Successful
DECmcc ELM FM V1.2 Installation Successful
Completing DECmcc ELM FM Installation Verification Procedure
Installation of MCCELMFM V1.2 completed at 17:59
VMSINSTAL procedure done at 17:59
MKART4-> lo
SYSTEM logged out at 9-AUG-1992 18:01:47.02
|