| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2910.1 | <<< Check for the following... >>> | KITFOX::BALL | | Fri May 01 1992 17:48 | 15 |
| Hi -
What the error message is actually saying is you probably do not
have the following things set up for your process:
( 1 ) the proper privileges enabled via set process/priv=""
you need to have access to objects via system protection
( 2 ) if you have all privileges do you have proxy to yourself on this
VMS system???
- darryl
|
| 2910.2 | | SEVERN::BREWTON | | Tue May 05 1992 13:13 | 13 |
| re .1
The account I'm running DECmcc has full privileges. I'm confused
by .1. It seems to me that no matter what, MCC should not look for
NETNODE_LOCAL.DAT in SYS$COMMON:[SYSEXE]. NETNODE_LOCAL.DAT is specific
to the particular system and should only be found in
SYS$SYSROOT:[SYSEXE]. Am I wrong, should I move NETNODE_LOCAL.DAT
to SYS$COMMON:[SYSEXE]?
Steve
|
| 2910.3 | QAR it. | TOOK::HOAG | Dave Hoag NSM Maintenance | Tue May 05 1992 16:21 | 4 |
|
A QAR is going to be entered.
- Dave.
|
| 2910.4 | isn't this an NML (not MCC) problem? | SWORD1::KENNEDY | MaryEllen - CTE | Tue May 12 1992 21:38 | 14 |
| better late than never, maybe.
I've seen this same error using NCP and I think .1 has hit it. While
NETNODE_LOCAL.DAT is in SYS$SYSROOT: (actually SYS$SPECIFIC:), it's most
likely being searched for via the logical SYS$SYSTEM (or even SYS$SYSROOT: -
do show logical on your system). If it can't open the one in the local
root, it tries again in SYS$COMMON: and reports file not found, event
though there was a previous error (probably protection).
You probably are going after this information via a DECnet connection, so
do you have a proxy set up? You could try NCP TELL 0 LIST EXEC CHAR and
see what happens.
_Mek
|
| 2910.5 | Still having problem??? | ZPOVC::RAYMONDTAN | | Wed Aug 26 1992 07:04 | 15 |
| I have added a proxy to my account and the NCP>TELL 0 LIST EXEC CHAR work
fine. However, I still face some problem showing the initial attribute
of other node with the following error;
%NONAME-E-OPENIN,error opening SYS$COMMON:[SYSEXE]NETNODE_LOCAL.DAT;as input
-RMS-E-FNF,file not found.
However, if I show the initial attribute via by user and by password
(privilege account), it works fine.
Thanks in advance.
Raymond Tan
|
| 2910.6 | you will need a proxy access on the remote systems | HERON::PATEL_A | LoLo-AQIC-I82Q-B4IP, - LMF | Wed Aug 26 1992 09:47 | 4 |
| you set a proxy on the local system, how about proxy access on the
remote systems ?
Amrit
|
| 2910.7 | No luck... | ZPOVC::RAYMONDTAN | | Thu Aug 27 1992 07:02 | 35 |
| I have set the proxy access for the remote node too. And inorder to get
you a clear picture, please see below;
System A (SIN004) - Running DECmcc
----------------------------------
My privilege login account is SYSTEM.
UAF> SHOW /PROXY *
Default proxies are flagged with (D)
SIN004::SYSTEM
SYSTEM (D)
SIN001::FIELD
SYSTEM (D)
SYSTEM B (SIN001) - Remote node
-------------------------------
My privilege login account is FIELD.
UAF> SHOW /PROXY *
Default proxies are flagged with (D)
SIN001::FIELD
FIELD (D)
SIN004::SYSTEM
FIELD (D)
|