| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
MCC T1.2.7
TS_AM T1.0.7
VMS A5.5
I am running a field test of network management services (NMS) at a
site in Bristol. I am suffering a problem with the terminal server
access module T1.0.7.
New installation of the terminal server access module. Installation was
clean. I am having problems registering all types of terminal servers and
are receiving a partial registration and the following error messages.
MCC>Register terminal_server dsv230 address = 08-00-2b-16-05-05, type ds300
Error returned DNA4 problem encountered updating DECnet database
error 347
When registering using the iconic map, and including the DECnet address
in the details screen the same error is returned.
If the DECnet address is not included in the details screen a different
error message is returned :-
Error returned Communication with target has been interrupted.
After this partial registration the termial server cannot be used
because all operations receive the same message above.
The DNS back translation .MCC_TERMINAL_SERVER_BACKTRANSLATION is set up
ok and other access modules can register Bridges,Node4,s etc.
The servers are acessable using TSM from the MCC platform.
Please can someone point me in the right direction.
Thanks
Mat Evans
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2900.1 | Questions | TOOK::FONSECA | I heard it through the Grapevine... | Fri May 01 1992 18:23 | 13 |
Mat- I'm equally baffled by your problems. From your example, I can not see why you would be getting a DNA4 error. TSAM does not go out to the DNA4 AM unless you provide a DECnet address. If you had previously attempted to register this with a DECnet address, and did it again without, then there might be reason. Since you are familiar with TSM, I'm wondering if you used the TSM to TSAM database convert utility? Also, did you have proper privs to access the DECnet database? -Dave | |||||
| 2900.2 | The Solution | FILTON::EVANS_M | Thu May 07 1992 08:44 | 8 | |
Dave,
Thanks for your reply. The solution was as simple as the access to the
Decnet account. The TS_AM is now performing perfectly.
Cheers
Mat Evans
| |||||