[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:DECmcc user notes file. Does not replace IPMT.
Notice:Use IPMT for problems. Newsletter location in note 6187
Moderator:TAEC::BEROUD
Created:Mon Aug 21 1989
Last Modified:Wed Jun 04 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:6497
Total number of notes:27359

2748.0. "%system-f-ivchan" by LARVAE::AITKINS_T () Mon Apr 13 1992 12:49

    Hello fellow MCC people,
    			     I'm polling about 20 routers and keep getting
    exceptions generated with the message 
    
    Error assigning channel for link : status code=%system-f-ivchan
    			Invalid i/o channel.
    
    Could anyone explain this to me and/or advise on how to overcome 
    the problem. If I clear the alarm, and wait for the next poll somtimes
    it works OK.
    
    		       		Terry.
T.RTitleUserPersonal
Name
DateLines
2748.1Any sugestionsLARVAE::AITKINS_TWed Apr 22 1992 15:205
    The problem outlined in .0 is on a vaxstationb 3100 modle76 with 32Mb
    of memory, I'm due to hand over to the customer on the 27th. Any help
    welcomed.
    
    				Terry.
2748.2Detail questionsTOOK::MINTZErik Mintz, DECmcc Development, dtn 226-5033Wed Apr 22 1992 19:334
What version of DECmcc are you running?
Which operating system?
what protocol are you using to poll the routers?

2748.3DECmcc v1.1,vms V5.3,PhaseIV AMLARVAE::AITKINS_TWed Apr 22 1992 23:519
    Hi
    
    	It's DECmcc version 1.1 on VMS 5.4 and I'm polling the routers using
    the Phase iv access module. If I click on the router Icon I can see all
    of the circuits and I can do a show status from the iconic map on them
    individually without any problems.
    
    
    			Terry.
2748.4Help.LARVAE::AITKINS_TSun Apr 26 1992 18:588
    Hi,
    	I'm due to hand over DECmcc to the customer tomorrow 27th April,
    however due to the nature of this problem and that in note 2761, he has
    mainly a red map. Any advise welcomed.
    
    	Thanks in advance 
    
    					Terry.
2748.5fixed in v1.2TOOK::S_KOHoot mon!Mon Apr 27 1992 19:3013
    hello Terry,
    
    i am sorry for such a late reply.
    
    A bug was found in the V1.1 Phase IV AM that exhibits this
    behavior; it is has been fixed in V1.2.
    
    are the routers that you are polling single-link systems?  (that is,
    they only support one network management link).  Do you make multiple
    requests of the router?  If so, try staggering the requests so that
    they will not attempt to access the system all at the same time.
    
    -s