[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

2517.0. "X1.2-15 Alarms & export problems" by KADOR::KADOR::DARMON (Le Boogaloup) Mon Mar 09 1992 12:06

Configuration:

VAX6410 / 64mb / VMS5.4-3
MCC X1.2.15

As in note 1994, I'm experiencing what I think are memory problems 
with alarms and exporting.

As long as I don't enable over about half a dozen alarms and exporting,
every thing is fine.

But as I have the need for about 25 export request and over 100 alarms,
things get "stuck".

	Exporting:

	No export will take place (counters stay at 0). The
	Background exporter is still there, and the status will
	be "ACTIVE". No export failure and no info in the background
	logfile.

	Alarms:

	The alarms will run fine until the first exception and 
	then none will trigger anymore but the state will be 
	"ENABLED" and substate will be "RUNNING". Sometimes,
	the exception comes with an ACCVIO. The rule causing
	the problem is never the same one.

	The exception will generate the following messages:

	Inconic map:

	%MCC-E-INV_DNSIDENT, specified identifier attribute is 
	not valid for instance lookup

	Mail message:
	
    Rule name:     MCC 0 ALARMS RULE VALBONNE_GEO-VBO_IN_CONGESTION
    Domain:        Domain GEOMCC:.MCC.DOMAIN.DNA4
  Occurred at:     9-MAR-1992 14:46:40.16
     Category:     Statistic: Circuit congestion
  Description:     VALBONNE Congestion Inbound (GEO-VBO:384)
     Severity:     Indeterminate
 
   Expression:     (NODE4 GVACOP CIRCUIT SYN-1	inbound utilization > 70, 
		   AT EVERY 0:30, for start -00:00 DURATION 0:25)
    Exception:     Software logic error detected
                   %MCC-S-SPECIALIZED_EXC, success with management 
		   module-specific exception reply


All exports and alarms are for NODE4 line & circuits.


Need any more info?


	Thanks & Best Regards, 

		Greg.

T.R	Title	User	Personal Name	Date	Lines
2517.1	Some Alarms Exceptions problems have been found	NANOVX::ROBERTS	Keith Roberts - DECmcc Toolkit Team	`Tue Mar 10 1992 10:16`	8
	Greg, Some problems in Alarms processing of Exceptions have been found and should be fixed in the x1.2.17 OR x1.2.18 baselevels. I am not sure if it will fix all of your problems, but the ACCVIO you had described was seen and these latest fixes should take care of the problem. /keith
2517.2	Great !	KADOR::KADOR::DARMON	Le Boogaloup	`Tue Mar 10 1992 14:11`	4
	Thanks, I'll try it out as soon as the next base level is available Greg.