| Sam,
> Let's create a clean environment for Exporter FM.
> Please, delete MCC_COMMON:MCC*.MCC_EXP* files. (I assume that you run on
> VMS, am I right?) Note that that after this you lose all exporting requests.
> It will not effect Historian.
Thank you for your advise. I tried it but the modify export still does
not work.
I have reproduced the problem in batch mode (it is the same in interactive
mode from the iconic map in ONE DECmcc session - i.e. without leaving
DECmcc): please refer to the attached batch log file for the details.
Notes: 1) we are running - VMS 5.5
- DECmcc BMS V1.1 (released kit + 2 alarm patches
from notes 1267)
2) During the batch job, no de-registration of .dna_node.TPLAB
occured:
$
$ sh tim
28-JAN-1992 11:48:47
$ mc dns$control sho obj .dna_node.tplab att DNS$UTS
dns$uts _____ 27-JAN-1992 09:41:28.25 aa-00-04-00-74-c0
Timestamp _ 27-JAN-1992 09:41:28.25 aa-00-04-00-74-c0
$
$
I would be very gratefull if you could examine the log file in appendix
and provide me with other advises.
> Yes and no.
>
> If there is an active exporting request and you re-register a target
> entity the background process suspend this request. All Exporter's command
> (except Export) can access this request but it can not be enabled. For
> example, Resume Exporting will tell you that request is resumed but the
> background process will suspend it again. So only Show Exporting and Delete
> Exporting have a meaning in this situation. You can specify an Export command
> and it will create a new request. After this the old request is not accessible.
Thank you for your answer. To be honnest, I do not understand it.
Potentially, I did not state my question clearly enough:
First of all, this seccond issue (recording issue) is totally unrelated
to the first issue (exporting issue).
From the iconic map PM:
- I started a recording with an end time and leave DECmcc.
- In a next DECMcc session, after the completion of the recording
(specified end time), I could do a show recording for the specified
entity and partion (state was supended)
- In the same session, I de-registered that entity and re-registered again
(with same (DNS) name), saving the map.
- After that operation, I could not do a show recording anymore
(message: "No recording for specified entity and partition"), neither
in the same DECmcc session nor in a new DECmcc session.
Question: what is the reason of this behaviour ?
Thank you very much for your support so far.
Maurice.
--------------------< APPENDIX: LOG FILE FOR THE FIRST ISSUE >-----------------
$!==================================
$!
$! LOGIN.COM
$!
$!==================================
$!
$! if f$mode() .eqs. "BATCH" then debug == 1
$ set noverify
%DCL-I-SUPERSEDE, previous value of SYS$BATCH has been superseded
$!================================================================================
$!
$! EXAMINE_EXPORTING.COM
$!
$!================================================================================
$!-------------------< Show environmnent details >--------------------------------
$ sho proc/priv
28-JAN-1992 09:06:25.37 User: COLLEYE Process ID: 00000CEF
Node: TPLAB Process name: "BATCH_228"
Process privileges:
CMEXEC may change mode to exec
TMPMBX may create temporary mailbox
NETMBX may create network device
SYSPRV may access objects via system protection
Process rights:
BATCH
GALLOP_USER
GALLOP_CHIEF
TERESA_LEADER dynamic
TERESA_BUILDER dynamic
TERESA_CONFIGURATOR dynamic
TERESA_RES resource, dynamic
TERESA_ANALYST dynamic
TERESA_DEVELOPER dynamic
GALLOP_CONFIGURATOR dynamic
GALLOP_ANALYST dynamic
TERESA$TRA
GALLOP_DEVELOPER dynamic
GALLOP_BUILDER dynamic
GALLOP_RESOURCE resource, dynamic
GALLOP_LEADER dynamic
CVPD_CONFIGURATOR dynamic
CVPD_DEVELOPER dynamic
CVPD_RES resource, dynamic
RAM_RES resource, dynamic
RAM_CONFIGURATOR dynamic
RAM_LEADER dynamic
RAM_ANALYST dynamic
RAM_DEVELOPER dynamic
RAM_BUILDER dynamic
RAM_USER dynamic
ADG_MEMBER
System rights:
SYS$NODE_TPLAB
$!
$!
$!
$ write sys$output f$getsyi("VERSION")
V5.5
$!
$!
$!
$ sh log MCC_EXP_RDB_FILE
"MCC_EXP_RDB_FILE" = "ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MCC_EXPORT.RDB" (LNM$PROCESS_TABLE)
$!
$!
$!
$ sh log mcc_specific
"MCC_SPECIFIC" = "SYS$SPECIFIC:[MCC]" (LNM$SYSTEM_TABLE)
$!
$!
$!
$ d/sec sys$specific:[000000]mcc.dir
Directory SYS$SPECIFIC:[000000]
MCC.DIR;1 1/3 27-DEC-1991 10:52:08.77 [SYSTEM] (RWE,RWE,RE,R)
Total of 1 file, 1/3 blocks.
$!
$!
$!
$ sh log mcc_common
"MCC_COMMON" = "SYS$COMMON:[MCC]" (LNM$SYSTEM_TABLE)
$!
$!
$!
$ d/sec sys$common:[000000]mcc.dir
Directory SYS$COMMON:[000000]
MCC.DIR;1 12/15 27-DEC-1991 10:52:07.68 [SYSTEM] (RWE,RWE,RE,R)
Total of 1 file, 12/15 blocks.
$!
$!
$!
$ d/sec mcc_common:mcc_dispatch_table.dat,mcc_mir*.dat,mcc_meta*.dat,mcc_dictionary.dat,mcc_definition.dat,mcc_ptb*.bpt
Directory SYS$COMMON:[MCC]
MCC_DISPATCH_TABLE.DAT;1
450/450 27-DEC-1991 11:03:31.34 [SYSTEM] (RWED,RWED,RWED,RW)
MCC_MIR_ATTRIBUTE.DAT;1
81/81 28-JAN-1991 21:42:08.96 [SYSTEM] (RWED,RWED,RWED,RW)
MCC_MIR_DIRECTORY.DAT;1
66/66 28-JAN-1991 21:42:08.01 [SYSTEM] (RWED,RWED,RWED,RW)
MCC_META_DEFINITION.DAT;1
4/6 14-NOV-1990 13:54:18.63 [SYSTEM] (RWED,RWED,RWED,R)
MCC_META_DICTIONARY.DAT;1
1/3 18-JUN-1990 16:26:09.38 [SYSTEM] (RWED,RWED,RWED,R)
MCC_DICTIONARY.DAT;1
21438/21438 28-JAN-1991 21:42:10.31 [SYSTEM] (RWED,RWED,RWED,RW)
MCC_DEFINITION.DAT;1
13323/13323 28-JAN-1991 21:42:11.47 [SYSTEM] (RWED,RWED,RWED,RW)
MCC_PTB_PARSER.BPT;1
1211/1212 1-FEB-1991 15:33:05.90 [SYSTEM] (RWED,RWED,RWED,R)
Total of 8 files, 36574/36579 blocks.
$!
$!
$!
$!
$ sho que tplab$batch/full
Batch queue TPLAB$BATCH, available, on TPLAB::
/BASE_PRIORITY=1 /JOB_LIMIT=8 /OWNER=[SYSTEM] /PROTECTION=(S:E,O:D,G:R,W:RW) /WSDEFAULT=1024 /WSEXTENT=8192 /WSQUOTA=4096
Entry Jobname Username Status
----- ------- -------- ------
93 MCC_HISTORIAN_BACKGROUND
COLLEYE Executing
Submitted 22-JAN-1992 08:37 /LOG=$92$DIA82:[ADG$USER.][COLLEYE].LOG; /PARAM=(".MC_WORK") /PRIORITY=100 /RESTART=TPLAB$BATCH
File: _DSA0:[VMS$COMMON.SYSMGR]MCC_HISTORIAN_BACKGROUND.COM;1 (executing)
223 MCC_EXPORTER_BACKGROUND
COLLEYE Executing
Submitted 28-JAN-1992 00:00 /LOG=$92$DIA82:[ADG$USER.][COLLEYE].LOG;
/PARAM=("ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MCC_EXPORT.RDB") /PRIORITY=100 /RESTART=TPLAB$BATCH
File: _DSA0:[VMS$COMMON.SYSMGR]MCC_EXPORTER_BACKGROUND.COM;1 (executing)
228 EXAMINE_EXPORTING
COLLEYE Executing
Submitted 28-JAN-1992 09:06 /NOTIFY /PRIORITY=100
File: _$92$DIA82:[ADG$USER.COLLEYE.DECMCC.COM]EXAMINE_EXPORTING.COM;2 (executing)
$!
$!
$!
$ sho entry
Entry Jobname Username Blocks Status
----- ------- -------- ------ ------
93 MCC_HISTORIAN_BACKGROUND
COLLEYE Executing
On available batch queue TPLAB$BATCH
223 MCC_EXPORTER_BACKGROUND
COLLEYE Executing
On available batch queue TPLAB$BATCH
228 EXAMINE_EXPORTING
COLLEYE Executing
On available batch queue TPLAB$BATCH
$!
$!
$!
$!-------------------< Clean the environment >------------------------------------
$ delete/entry=223 ! abort exporter background
$!
$!
$!
$ d/sec mcc_common:*.mcc_exp*
Directory SYS$COMMON:[MCC]
MCC_00.MCC_EXP_INST011_PMS;1
66/66 28-JAN-1992 00:00:45.91 [SYSTEM] (RWED,RWED,RE,)
MCC_C074000400AA000001CADCF0CF012411.MCC_EXPO_Q11_Q;1
5/6 28-JAN-1992 00:10:19.10 [SYSTEM] (RWED,RWED,RWED,)
MCC_C074000400AA000001CADCF0CF012411.MCC_EXP_ATTR011_P;1
81/81 28-JAN-1992 00:10:38.19 [SYSTEM] (RWED,RWED,RE,)
MCC_C074000400AA000001CADCF0CF012411.MCC_EXP_ATTR011_PH;1
81/81 28-JAN-1992 00:10:40.71 [SYSTEM] (RWED,RWED,RE,)
MCC_C074000400AA000001CADCF0CF012411.MCC_EXP_INST011_P;1
66/66 28-JAN-1992 00:10:36.51 [SYSTEM] (RWED,RWED,RE,)
MCC_C074000400AA000001CADCF0CF012411.MCC_EXP_INST011_PH;1
66/66 28-JAN-1992 00:10:39.10 [SYSTEM] (RWED,RWED,RE,)
Total of 6 files, 365/366 blocks.
$!
$!
$!
$ del/log mcc_common:*.mcc_exp*.* ! delete exporter files
%DELETE-I-FILDEL, SYS$COMMON:[MCC]MCC_00.MCC_EXP_INST011_PMS;1 deleted (66 blocks)
%DELETE-I-FILDEL, SYS$COMMON:[MCC]MCC_C074000400AA000001CADCF0CF012411.MCC_EXPO_Q11_Q;1 deleted (6 blocks)
%DELETE-I-FILDEL, SYS$COMMON:[MCC]MCC_C074000400AA000001CADCF0CF012411.MCC_EXP_ATTR011_P;1 deleted (81 blocks)
%DELETE-I-FILDEL, SYS$COMMON:[MCC]MCC_C074000400AA000001CADCF0CF012411.MCC_EXP_ATTR011_PH;1 deleted (81 blocks)
%DELETE-I-FILDEL, SYS$COMMON:[MCC]MCC_C074000400AA000001CADCF0CF012411.MCC_EXP_INST011_P;1 deleted (66 blocks)
%DELETE-I-FILDEL, SYS$COMMON:[MCC]MCC_C074000400AA000001CADCF0CF012411.MCC_EXP_INST011_PH;1 deleted (66 blocks)
%DELETE-I-TOTAL, 6 files deleted (366 blocks)
$!
$!
$!
$ d/sec mcc_d_exp:*.*
Directory ADG$USER_21:[COLLEYE.DECMCC.EXPORT]
MCC_EXPORT.RDB;1 1816/1818 28-JAN-1992 00:10:50.01 [COLLEYE] (RWED,R,,)
MCC_EXPORT.SNP;1 598/600 28-JAN-1992 00:10:51.52 [COLLEYE] (RWED,R,,)
Total of 2 files, 2414/2418 blocks.
$!
$!
$!
$ delete/log mcc_d_exp:*.*.* ! delete export RDB database
%DELETE-I-FILDEL, ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MCC_EXPORT.RDB;1 deleted (1818 blocks)
%DELETE-I-FILDEL, ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MCC_EXPORT.SNP;1 deleted (600 blocks)
%DELETE-I-TOTAL, 2 files deleted (2418 blocks)
$!
$!
$!
$ @mcc_d_com:sub_exp_bck.com ! restart the exporter background
$ rdb_exp = f$trnlnm("mcc_exp_rdb_file")
$ submit/log=sys$login/restart/que=tplab$batch/para=(ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MCC_EXPORT.RDB) sys$manager:mcc_exporter_background.com
Job MCC_EXPORTER_BACKGROUND (queue TPLAB$BATCH, entry 229) started on TPLAB$BATCH
$!
$!
$!
$ wait 00:10:00
$!
$!
$!
$ sh entry
Entry Jobname Username Blocks Status
----- ------- -------- ------ ------
93 MCC_HISTORIAN_BACKGROUND
COLLEYE Executing
On available batch queue TPLAB$BATCH
228 EXAMINE_EXPORTING
COLLEYE Executing
On available batch queue TPLAB$BATCH
229 MCC_EXPORTER_BACKGROUND
COLLEYE Executing
On available batch queue TPLAB$BATCH
$!
$!
$!
$!-------------------< Start the exporting >------------------------------------
$ manage/enter
DECmcc (V1.1.0)
EXPORT NODE4 .dna_node.TPLAB Export period 00:05:00, Sequence name "JUST TO TEST", Sequence number 1, Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 48.116
AT 28-JAN-1992 09:16:40
Exporting started
EXIT
$!
$!
$!
$ wait 00:15:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 09:32:38
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:17:30.19,
Export period = 0 00:05:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 25-MAY-2012 00:00:00.00,
Export target = "ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MC
C_EXPORT.RDB",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 09:27:46.01",
Number of successful polls = 3,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 09:27:46.01",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 4
EXIT
$ wait 00:06:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 09:38:47
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:17:30.19,
Export period = 0 00:05:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 25-MAY-2012 00:00:00.00,
Export target = "ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MC
C_EXPORT.RDB",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 09:32:46.02",
Number of successful polls = 4,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 09:32:46.02",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 5
EXIT
$!
$!
$!
$ d/sec mcc_common:*.mcc_exp*
Directory SYS$COMMON:[MCC]
MCC_00.MCC_EXP_INST011_PMS;1
66/66 28-JAN-1992 09:07:10.75 [SYSTEM] (RWED,RWED,RE,)
MCC_C074000400AA000001CADD3D241C3269.MCC_EXPO_Q11_Q;1
5/6 28-JAN-1992 09:16:44.40 [SYSTEM] (RWED,RWED,RWED,)
MCC_C074000400AA000001CADD3D241C3269.MCC_EXP_ATTR011_P;1
81/81 28-JAN-1992 09:17:02.56 [SYSTEM] (RWED,RWED,RE,)
MCC_C074000400AA000001CADD3D241C3269.MCC_EXP_ATTR011_PH;1
81/81 28-JAN-1992 09:17:05.31 [SYSTEM] (RWED,RWED,RE,)
MCC_C074000400AA000001CADD3D241C3269.MCC_EXP_INST011_P;1
66/66 28-JAN-1992 09:17:01.12 [SYSTEM] (RWED,RWED,RE,)
MCC_C074000400AA000001CADD3D241C3269.MCC_EXP_INST011_PH;1
66/66 28-JAN-1992 09:17:03.79 [SYSTEM] (RWED,RWED,RE,)
Total of 6 files, 365/366 blocks.
$!
$!
$!
$ d/sec mcc_d_exp:*.*
Directory ADG$USER_21:[COLLEYE.DECMCC.EXPORT]
MCC_EXPORT.RDB;1 1816/1818 28-JAN-1992 09:17:15.56 [COLLEYE] (RWED,R,,)
MCC_EXPORT.SNP;1 598/600 28-JAN-1992 09:17:17.06 [COLLEYE] (RWED,R,,)
Total of 2 files, 2414/2418 blocks.
$!
$!
$!
$!-------------------< Suspend the exporting >-----------------------------------
$ manage/enter
DECmcc (V1.1.0)
SUSPEND EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 09:38:58
Exporting is suspended
EXIT
$!
$!
$!
$ wait 00:15:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 09:54:06
Exporting parameters are:
Exporting state = SUSPENDED,
State since = 28-JAN-1992 09:38:58.03,
Export period = 0 00:05:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 25-MAY-2012 00:00:00.00,
Export target = "ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MC
C_EXPORT.RDB",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 09:32:46.02",
Number of successful polls = 4,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 09:32:46.02",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 5
EXIT
$!
$!
$!
$!-------------------< Resume the exporting >------------------------------------
$ manage/enter
DECmcc (V1.1.0)
RESUME EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 09:54:16
Exporting resumed
EXIT
$!
$!
$!
$ wait 00:15:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 10:09:24
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:54:17.81,
Export period = 0 00:05:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 25-MAY-2012 00:00:00.00,
Export target = "ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MC
C_EXPORT.RDB",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 10:04:20.41",
Number of successful polls = 3,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 10:04:20.41",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 8
EXIT
$ wait 00:06:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 10:15:34
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:54:17.81,
Export period = 0 00:05:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 25-MAY-2012 00:00:00.00,
Export target = "ADG$USER_21:[COLLEYE.DECMCC.EXPORT]MC
C_EXPORT.RDB",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 10:09:20.41",
Number of successful polls = 4,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 10:09:20.41",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 9
EXIT
$!
$!
$!
$!-------------------< Modify the exporting >------------------------------------
$ manage/enter
DECmcc (V1.1.0)
MODIFY EXPORTING NODE4 .dna_node.TPLAB Export period 00:10:00, End time = 18:00:00, Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 10:15:43
The requested operation cannot be completed
Entity Existence Info = Entity Existence Cannot Be Determined,
MCC Routine Error = %MCC-E-NOENTITY, no corresponding
entity instance exists
EXIT
$!
$!
$!
$ wait 00:21:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 10:36:52
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:54:17.81,
Export period = 0 00:10:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 28-JAN-1992 18:00:00.59,
Export target = "adg$user_21:[colleye.decmcc.export]mc
c_export.rdb",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 10:29:20.41",
Number of successful polls = 8,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 10:29:20.41",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 13
EXIT
$ wait 00:07:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 10:44:01
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:54:17.81,
Export period = 0 00:10:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 28-JAN-1992 18:00:00.59,
Export target = "adg$user_21:[colleye.decmcc.export]mc
c_export.rdb",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 10:39:20.41",
Number of successful polls = 10,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 10:39:20.41",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 15
EXIT
$!
$!
$!
$!-------------------< Suspend the exporting >-----------------------------------
$ manage/enter
DECmcc (V1.1.0)
SUSPEND EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 10:44:11
The requested operation cannot be completed
Entity Existence Info = Entity Existence Cannot Be Determined,
MCC Routine Error = %MCC-E-NOENTITY, no corresponding
entity instance exists
EXIT
$!
$!
$!
$ wait 00:21:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 11:05:21
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:54:17.81,
Export period = 0 00:10:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 28-JAN-1992 18:00:00.59,
Export target = "adg$user_21:[colleye.decmcc.export]mc
c_export.rdb",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 10:59:20.44",
Number of successful polls = 14,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 10:59:20.44",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 19
EXIT
$ wait 00:07:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 11:12:32
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:54:17.81,
Export period = 0 00:10:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 28-JAN-1992 18:00:00.59,
Export target = "adg$user_21:[colleye.decmcc.export]mc
c_export.rdb",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 11:04:20.41",
Number of successful polls = 15,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 11:04:20.41",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 20
EXIT
$!
$!
$!
$!-------------------< Resume the exporting >------------------------------------
$ manage/enter
DECmcc (V1.1.0)
RESUME EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 11:12:41
Exporting is already active
EXIT
$!
$!
$!
$ wait 00:21:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 11:33:50
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:54:17.81,
Export period = 0 00:10:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 28-JAN-1992 18:00:00.59,
Export target = "adg$user_21:[colleye.decmcc.export]mc
c_export.rdb",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 11:29:20.41",
Number of successful polls = 20,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 11:29:20.41",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 25
EXIT
$ wait 00:07:00
$ manage/enter
DECmcc (V1.1.0)
SHOW EXPORTING NODE4 .dna_node.TPLAB Export target adg$user_21:[colleye.decmcc.export]mcc_export.rdb
Node4 SDE:.dna_node.TPLAB
AT 28-JAN-1992 11:40:59
Exporting parameters are:
Exporting state = ACTIVE,
State since = 28-JAN-1992 09:54:17.81,
Export period = 0 00:10:00.00,
Begin time = 28-JAN-1992 09:16:40.12,
End time = 28-JAN-1992 18:00:00.59,
Export target = "adg$user_21:[colleye.decmcc.export]mc
c_export.rdb",
Request time = 28-JAN-1992 09:16:40.12,
Requested by = "COLLEYE",
Time of last successful poll = "28-JAN-1992 11:34:20.41",
Number of successful polls = 21,
Time of last failed poll = "NONE",
Last poll failure reason = "N/A",
Number of failed polls = 0,
Last export time = "28-JAN-1992 11:34:20.41",
Time of last export failure = "NONE",
Last export failure reason = "N/A",
Number of export failures = 0,
Sequence name = "JUST TO TEST",
Initial sequence number = 1,
Current sequence number = 26
EXIT
$!
$!
$!
$!-------------------< That's it >-----------------------------------------------
$ exit
COLLEYE job terminated at 28-JAN-1992 11:41:03.95
Accounting information:
Buffered I/O count: 1412 Peak working set size: 4680
Direct I/O count: 2070 Peak page file size: 14768
Page faults: 46151 Mounted volumes: 0
Charged CPU time: 0 00:01:14.73 Elapsed time: 0 02:35:01.61
|