| Have you looked in the Autotopology Use Manual? It's located here:
TNPUBS::USER$657:[PUBLIC.NMS.MAKO]DECMCC_ELM_AUTOTOPOLOGY_USE_EFT12.PS
Also, please check out the MCCELMT012.RELEASE_NOTES which should be in
SYS$HELP. The release notes list some of the restrictions and known
problems of the field test kit.
| I will enter the error messages I am getting if it is of any help, but
| basically it comes back saying invalid parameters.
Yes, please post as much detail as you can. That will give us at least
some idea of what's going wrong. Please describe how you are running
the spanning tree and FDDI map applications, and any relevant
information like currently open domains.
Can you try these three commands and post the result?
MCC> TEST MCC 0 STM_FM
MCC> TEST MCC 0 FDDI_FM
MCC> TEST MCC 0 ICONICMAP APPLICATION LAN_TOPOLOGY_PM
Thanks.
|
| Hello, again,
My problem was with mcc_stm_database.ldb not being there. I ran the
appropriate procedure in MCC_COMMON to start the listener but it
didn't!
I am running on a FT410 and the procedure doesnt check for my EFA0:
device. I have hacked the procedure and everything is fine!
Wanna buy my hack anyone.... :*)
Ta,Stuart
|