[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

2115.0. "qar system doesn't work as advertised" by COL01::LUNT () Wed Jan 15 1992 08:01

    Hello,
    
    	Today Uwe Welzel and I logged into the QAR system to check it out
    and to see the status of QAR's. We had the following problems:
    
    	1. It was so slow it was pratically unusefull, but perhaps
           set host from Germany is the problem there.
    
    	2. We wanted to check out the status of QAR 1960(Graph problem).
           Using either Read number 1960 or Show number 1960 tells
           us that the QAR does not exist. The number is given
           in note 2057.
    
    	3. We wanted to enter a QAR of priority level 5 about
    documentation. The qestions asked were not what is documented
    in the manual that was sent us. Then after entering the editor,
    we couldn't type anything in, no control z, nothing. I finally
    had to CTR c and abort the connection to NACQAR.
    
    Are we using the system totally wrong, or what's up. We wanted
    to try the system out before letting our Customer have the manual and
    they had to enter in reports or such, just to make sure.
    
    THanks Julie Ann
    Networks and Communications, Cologne Germany
    External Field Test, Bayer AG, Leverkusen Germany

T.R	Title	User	Personal Name	Date	Lines
2115.1		COL01::LUNT		`Wed Jan 15 1992 08:08`	3
	reply Sorry that was note 1973 where the QAR numbers are given.
2115.2	MCC_INTERNAL is qar database we use	TOOK::CALLANDER	MCC = My Constant Companion	`Wed Jan 15 1992 11:04`	50
	Your qar was entered in the MCC_INTERNAL database. This is where we enter all qars that are from internal sites. Your qar has been answered, but not closed. Qar> show 1960 QAR# Sts Pub Cat Maintainer Component T Entered-by Date in Date out ---- --- --- --- ----------- ---------- - ------------ ----------- ----------- 01960 AN Yes IP QD_LEMMON ICONIC_MAP M QD_MINTZ 20-DEC-1991 23-DEC-1991 VMS: GRAPH OPERATION HANGS DECMCC Qar> --------------- <from the read 1960> Answer for QAR #01960: ------ --- --- ------- This bug can not be reproduced on our systems here. It does occur on WRK4ME. Also saw an accvio pulling down an operation. The process quotas are lower than suggested in release notes and quotas in release notes are problably too low. A debug image fails with INSFMEM error. Insufficient dynamic memory. Investigation is continuing. AM ------------------------------------------------------ question 3. NACQAR uses edt, you are entered using line mode. Type a "C" at the prompt to get into the keypad edittor. ^Z should work though. As to why it doesn't match the documentation, I will send that along (I never received any documentation so I have nothing to compare against). jill
2115.3	Try include file under EDT	TAEC::LAVILLAT		`Wed Jan 15 1992 11:53`	26
	Re .0: Just a comment on EDT : the NACQAR node when accessed from Europe is very slow (especially if you use it the afternoon). What we do here (Valbonne) to enter a QAR is : - we prepare the QAR text locally on our machines - connect to NACQAR - enter the QAR header informations - once under EDT : - we never do C (too slow) - but only type under the * prompt : include file node"username passwd"::filenameofqartext.txt - and exit EDT via * exit Proceeding this way you should not have too much problem. I also recommend you use NACQAR only early the morning (we MCC people are asleep...) Regards. Pierre.