[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

2078.0. "Enrollment problem, ULTRIX FT1.2.4, local_ns" by FILTON::BARKER_E (Ummm...) Mon Jan 13 1992 06:47

Hi,
    
    	I'm working on a Field test site with the ULTRIX EFT (1.2.4 at the
    moment) with the local namespace set up. The engineers there are
    developing a number of access modules and are having some problems
    enrolling them. One can be enrolled with no problem at all, but a
    second gives the following error messages when enrolled :-

    MCC> enroll xxxxx (their access module)
    
    	failure in kernel event receipt. thread terminating
    	MCC-E-EVT_POOL_NOTMAPPED, event pool is not mapped
    	WARNING: failed to post enrollment event to other MM's
    	%MCC-F-EVT_POOL_VER_SKEW, event pool version incompatible
    
    	Don (the engineer) looked through the Management Module programming 
    guide and found info on the event pool data file in section 4.3, but 
    cannot find this file (mcc_event_pool.dat) anywhere on the system. The 
    access module does get enrolled but errors appear when running that 
    mention event posting etc.
    
    	This is causing a fair level of confusion as the other access 
    module being worked on at the moment is giving no problems. I've seen 
    the 'failure in kernel event receipt. thread terminating' messages 
    before, mainly during the installation but don't seem to give any 
    problems. Have you seen these errors ? Is the event pool file available 
    ? Should they have it ?
    
    	The only other issue is that the iconic map is hanging most of the 
    time when they fire up the graphs option, again is this happening 
    elsewhere, and is it a known problem ? I've been running graphs on our 
    system with no problems , but it's not being used as heavily, and I 
    haven't used 1.2.4 much yet.
    
    	Any help you can give, particularly on the first one would be most 
    appreciated.
    
    	Regards,
    
    	    Euan

T.R Title User Personal
Name Date Lines

2078.1 Event problems usually mean old code TOOK::MINTZ Erik Mintz, DECmcc Development Mon Jan 13 1992 09:32 16

T.R	Title	User	Personal Name	Date	Lines
2078.1	Event problems usually mean old code	TOOK::MINTZ	Erik Mintz, DECmcc Development	`Mon Jan 13 1992 09:32`	16
	> failure in kernel event receipt. thread terminating > MCC-E-EVT_POOL_NOTMAPPED, event pool is not mapped > WARNING: failed to post enrollment event to other MM's > %MCC-F-EVT_POOL_VER_SKEW, event pool version incompatible This usually indicates that a module linked against an OLD kernel is running at the same time as the new code. Do they understand that all modules must be re-linked (at least) for T1.2.4? > time when they fire up the graphs option, again is this happening > elsewhere, and is it a known problem ? I've been running graphs on our This problem is being investigated. -- Erik

>    	failure in kernel event receipt. thread terminating
>    	MCC-E-EVT_POOL_NOTMAPPED, event pool is not mapped
>    	WARNING: failed to post enrollment event to other MM's
>    	%MCC-F-EVT_POOL_VER_SKEW, event pool version incompatible

This usually indicates that a module linked against an OLD kernel
is running at the same time as the new code.  Do they understand
that all modules must be re-linked (at least) for T1.2.4?

>    time when they fire up the graphs option, again is this happening 
>    elsewhere, and is it a known problem ? I've been running graphs on our 
    
This problem is being investigated.

-- Erik