Conference azur::mcc

1408.0. "Cannot register nodes, all else well." by HANNAH::B_COBB () Wed Aug 28 1991 00:24

    I have a problem with MCC (V1.1.0) that I cannot figure out.
    2 days ago I registered about 50 stations.  All registered 
    ok.  I used the Iconic map to move them around and such and
    have done operations on them such as show counters and such
    and they all work.  Today I started MCC and my default domain
    comes up ok, I can do operations but I cannot add any new
    stations either fron the Iconic map ot the command line interface.
    the error is :
    
    The Requested Operation Cannot be Completed:
    
    	MCC Unhandled Service Reply = Cannot Communicate with Target
    
    I cannot add ANY stations.  All network functions work from the MCC
    host to the nodes I want to add.  There are no network problems that
    stand out here.  Ethernim, which runs on the same host, can see and
    talk to all the nodes that fail upon adding with MCC.
    
    The only things that have changed is that I reinstalled RDB on the HOST
    node.  That is the only thing that happened between the time it was
    working and the time it failed that I know of.  All other products
    work fine, ELMS, TSM, LTM, and Ethernim.  The nameserver is up and
    running, when I bring up the Iconic map, I see a links from the MCC
    host to the nameserver.  I tried shutting off all of the network
    management stuff (LTM, ETHERNIM and such) and then trying it again
    but no luck.  I get failures adding from the Iconic map and the command
    interface.
      
    What is the troubleshooting path for this problem?
    
    
    Any help is appreciated.

    The problem turned out to be user error.  I did not include an
    alternate address when I registered the stations.  I have registered
    them ok now.