[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

1325.0. "Can't register CHIPCOM " by ZUR01::SCHNEIDERR () Fri Aug 09 1991 10:17

Hello,

I've just installed SNMP AM V1.2 EFT. But I can't register a CHIPCOM Online
Concentrator as an SNMP node. I ve done the following:

UCX> set host chipcom....../addr=....../synon=......
UCX> loop chipcom
%UCX-I-LOOPACT, CHIPCOM is alive


If I want register the IP node "chipcom" I get the message "No response from 
entity".

Does somebody know what I'vo done wrong. We have CHIPCOM management module V1.2

				Roland

T.R	Title	User	Personal Name	Date	Lines
1325.1	Check community	YAHEY::BOSE		`Fri Aug 09 1991 12:23`	13
	Check if your node is registered under a community name on the Chipcom concentrator. To do this you need to log in at the Chipcom concen. console and at the ONLINE> prompt issue the following command ONLINE> show community The agent will respond to request for values of SNMP objects from a particular node, only if that node is registered under one of the community names. One could make things easier by setting up world-wide read access under the community name "public". Rahul.
1325.2	Any SNMP agent ??	COPCLU::SORENC		`Mon Aug 19 1991 12:07`	6
1325.3	having same problem with CHIPCOM v2.0 card	ARRODS::GILLJ	John, DTN 847-5849	`Wed Sep 11 1991 17:42`	25
	I am having the same problem as Roland in .0 My Chipcom hub has a network management v2.0 card which supports SNMP. I can do a LOOP CHIPCOM and the hub shows as "alive" If I do a show community at the "ONLINE>" prompt on the Chipcom Hub there are three entries. CHIPCOM address *...* access read-write CHIPCOM address 16.182.32.252 access trap ANGLE address 16.182.32.63 access all The internet address of the hub is 16.182.32.252, my host's internet address is 16.182.32.63. The MCC error message I get is "No response from entity" But I can do a UCX "Loop" to the hub, and can manage a PC and Vitalink bridge that connect through the HUB. Any help appreciated John
1325.4		MKNME::DANIELE		`Wed Sep 11 1991 18:58`	20
	> I can do a LOOP CHIPCOM and the hub shows as "alive" Here CHIPCOM is the host name of the hub. > If I do a show community at the "ONLINE>" prompt on the Chipcom Hub > there are three entries. > CHIPCOM address *...* access read-write > CHIPCOM address 16.182.32.252 access trap > ANGLE address 16.182.32.63 access all Here CHIPCOM is a community name? Does an address of *...* mean any IP address? You need to issue an mcc command using the "by password" qualifier containing a community name that will work. Like mcc> show snmp CHIPCOM all char, by password = "CHIPCOM". What exact commands are you executing?
1325.5	Community name public does the trick	ARRODS::GILLJ	John, DTN 847-5849	`Thu Sep 12 1991 13:27`	12
	Yes CHIPCOM is a community name. I have tried various varieties of community names in the chipcom hub. Inputing the Network Management Host name and Hub name (allowing "ACCESS ALL") would not allow the network management station access the HUB. I then input "public" as a community name giving it the IP address of my workstation and "ACCESS ALL". This works fine.